The project, Glowtest Fixture, has been carried out to and in collaboration with MSA SordinLtd. MSA Sordin Ltd produces and sells ear protector and is at present a supplier on theworld market. Glowtest Fixture is a product for glow testing off detailed components in oneear protector. MSA Sordin Ltd sends today away your products for testing what is anexpensive aspect in their development. The project's aim is to take forward a test equipmentthat copes with those high nonplussed requirements and wishes that are required for anapproved physical execution.Glowtest Fixture is a physical equipment that comes used stem glow physical off all detailedcomponents in one ear protector.

I alla byggprojekt som behandlas är arkitekter och brandkonsulter två viktiga aktörer. Arkitekternas huvudsyfte är att ge människor ett gestaltningsmässigt intryck av en byggnad, men även att ge den ett praktiskt och tryggt användande. Brand-konsulternas roll är bland annat att hjälpa arkitekterna med den del som innefattar brandsäkerhet. Idag är samarbetet mellan arkitekter och brandkonsulter inte optimalt men det finns enkla förändringar som skulle effektivisera arbetsmetodiken.Detta examensarbete har resulterat i en lathund gällande brandprojektering som riktar sig till arkitekter. Lathunden baseras på kapitlet om brandskydd i Boverkets Byggregler (BBR), de omfattande handböckerna som används vid projektering samt statistik gällande de vanligaste problemen mellan aktörerna idag.

During the autumn 2009, a 15 hp degree project was accomplished. The objective of the study was to describe different equipment alternatives, suitable for fresh market apple harvest. A field study was conducted during the harvest period to evaluate the efficiency (kg / person/ hour), using the different equipment. Four different systems are described in the study; Pick-ing-bag, Picking-train, Pluk-O-Trak and the Conveyor Harvester. The information about the systems is based on interviews with growers together with previous studies.

In this bachelor thesis, diagnostic methods for one of Siemens stem inlet control valves have been developed. The work has taken place during ten weeks at Siemens Industrial Turbomachinery AB in Finspång. The company produce steam- and gas turbines and also provides service and maintenance. The purpose with this project has been to develop diagnostic methods that oversee the health of the control valves. By using the developed methods you will know when it?s time for maintenance.

Uppsatsen innefattar en intern benchmarking för Volvo Construction Equipment, Arvika, Hallsberg, Eskilstuna och Braås. En kartläggning utifrån intervjuer ska göras över de investeringskalkyleringsmetoder som används i dagsläget. Syftet är att arbeta fram en mall för investeringar inom Operations Sweden, där samtliga involverade använder samma beräkningsmetoder och parametrar i sina bedömningar.Volvo Construction Equipment tillverkar anläggningsmaskiner. De fyra fabrikerna bildar tillsammans gemenskapen Operations Sweden. Inom Operations Sweden tas beslut om ett investeringsprojekt ska genomföras eller ej.

Invoxicated is an interactive play sculpture where children can explore the wonderful and playful opportunities of sound. Talk into one end of the sculpture, and the sound will travel through the sculpture and come out in the other end. On its way, the sound gets distorted by a number of sound effects. By bending the sculpture?s body, and pressing the sculpture?s buttons, the sound effects gets altered in real time.

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

Aim and research questionsThe aim of the study was to examine pupils? physical activity on schoolyards in northern Stockholm?s surrounding municipalities, based on the schoolyards? design regarding supply of spaces, material, equipment and gender. The research questions were:1. Was there any association between how well spaces, materials and equipment were represented in the schoolyards and pupils? physical activity during recess? If so, how did the association come to expression?2.

The Intensive Care Unit (ICU) is a special unit for patients who is in the need for emergency life-sustaining measures and every patient has complex medical- technical equipment. The experiences of a critical illness and the needs of critical care are experienced in different ways. The purpose of this study was to describe the experiences from patients in the ICU and how this experience has an influence on the patients. The method was a study of literature with a qualitative inception based on eight scientific articles and the analysis of content has been inspired by Graneheim and Lundman (2003). The result of the study is presented by four categories: to loose the ability to make themselves understood, to be forced to adjust to the environment of caring, to have the lack of connection with reality and to be in an intensive care environment, The results showed that patients in the ICU are affected by the attitude from the staff, the equipment around them as well as the sounds and lights in the environment there.

In the tropics, logging and wild fire can result in degraded secondary forests with lower biodiversity than in the natural forest. One way to limit forest degradation is to rehabilitate the present large areas of secondary forests. However, there is a lack of knowledge concerning the ecology of tropical tree species and further studies would be advantageous for future rehabilitation efforts of degraded rainforest. The objective of this study was to investigate how mother trees in secondary forest and different site factors affect the abundance and spatial distribution of natural regeneration of non-pioneer tree species in a tropical rainforest in Sabah, Malaysia. The study took place in the INIKEA Forest Rehabilitation Project area, which suffered from wild fire in 1983 and has been selectively logged over both before and after the fire. Natural regeneration and site variables were inventoried in plots, while mother trees were inventoried in the whole survey area.

The purpose of this study was to compare normal electroretinographies (ERGs) from three different canine breeds in order to evaluate if there were any marked similarities or differences between these breeds as to ERG responses. It is known that healthy dogs from different breeds but also dogs within the same breed but in different age categories may have different appearances of their ERG responses. This may be a problem when evaluating if an ERG is normal or not from a dog within a breed not previously examined. Because of this it is important to obtain normal values for each breed and age group in order to be able to use these for later comparisons of ERGs obtained from individuals affected with various retinal diseases. In this study we have chosen to examine dogs within the three breeds: Labrador Retriever (LR), English Springer Spaniel (ESS) and Chinese Crested Dog (CCD). All of these breeds may be affected with hereditary retinal diseases such as Progressive Retinal Atrophy (PRA). It is possible that ERG-responses vary due to a number of different factors.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.