This master thesis concerns the occupational safetyenvironment at Outokompu Stainless, Avesta Work.The study is of a sociotechnical approach wherehumans are involved and interconnected in the samesystem with technology and organisation. In order toreach the corporation?s goal of zero accidents with losttime injury, the work of improving and maintainoccupational safety and health has to regard behaviourand cultural aspects. The aim of this study is todescribe the safety culture at a specific production unitand research what work which has to be done in orderto change and improve the safety culture at AvestaWork.There are several opportunities for improvementpointed out in this paper and here are some mainresults presented. First and foremost, the concern ofsafety among blue-collar is often secondary due toproduction.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

The aim of the study was to examine both 1) how aware teachers in a specific area are about ICT tools in teaching ; and 2) how likely teachers are to use ICT tools to reverse the trend of unmotivated students and low achievement scores . I will look for answers through the following questions:How extensive is the knowledge of the teachers on digital and social media in education? How have teachers in the past year used various social media in their teaching? In what grade does ICT-supported teaching lead to higher motivation, participation and achievement? Is there a difference between the sexes, different stages (1-3, 4-6, 7-9) and number of years in the profession in knowledge of and openness to the use of ICT in education?The method used is a questionnaire in which a number of respondents have answered a number of questions about ICT tools in teaching. Validity of the study can be said to be high when the survey has measured what it intended to measure, however, I need to be careful in draw full account of the result as the response rate is low with only 39%. In summary, the results show that there is low awareness among respondents about the methods and the digital and social tools I lift in the survey.Mainly the respondents use some of the methods and the digital and social tools in preparation for the lesson.

If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

Examensarbetet har bedrivits vid Tekniska Högskolan i Jönköping och i samarbete med fallföretaget Solutions for Tomorrow AB. Arbetet har utformats efter ett syfte; att utveckla ett produktkoncept där alternativa material och tillverkningsmetoder leder till kostnadsbesparingar. Syftet har sedan brutits ned till fyra frågeställningar som arbetet kretsar kring. Två frågeställningar behandlar redan framtagna koncept och två rör ekonomiska aspekter för nya projekt. För att besvara frågeställningarna är arbetet utformat som en konceptstudie där hela utvecklingsprocessen har genomförts.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

The purpose of the present study was to study if the systemic blood pressure in cats significant increases due to stress associated with a visit to a veterinarian clinic. We also wanted to investigate the clinical utility of two different methods for indirect blood pressure measurements in cats by assessing how easy they were to use and how reliable measurements they provided. The methods that were used were oscillometric (Memo Diagnostic) and ultrasound-doppler technique (Minidop). The blood pressure was measured in both clinical environment and home environment. Fifty cats were used in the study, from which measurements were impossible to obtain in one cat.

Sveaverken is a company who manufactures products and equipment for the modern farm enterprise within grain, pork and horse businesses. A large share of Sveaverken's turnover depends on the role as a subcontractor for Delaval within the areas ventilation, manure handling and feeding systems. Sveaverken wants to investigate the possibility to increase sales by establishing new sales channels, for example e-commerce This thesis is an analysis of the Swedish farmers use of internet, attitudes towards e-commerce and Sveaverken's interest within this area. There is also a minor economic analysis of the cost of establishing the e-commerce site. The study focuses on farmers who are potential customers to Sveaverken within Sweden. To examine the farmers opinions about internet and e-commerce a questionnaire was developed and sent out in November 2006, to 500 farmers of which 45% answered. The results show that the average age of the farmers was 42,5 years.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

The title Urban furniture for young people reveals that this paper handles two central phenomenon in landscape architecture; the form and content of the urban spaces, respectively the users and their need for an appropriate outdoor environment in the city. In this paper youth is referred to as 15-18 year olds and the paper is based on theories of their physical use of the city?s outdoor environment. Urban furniture refers to equipment and components in the public room which becomes furniture when people takes them in to claim and gives them a meaning and a function that is useful for the moment. The starting point is that the users, in this case youths, defi nes urban furniture as something signifi cantly more than traditional park furniture, bicycle racks and waste baskets. This paper aims to investigate how the city?s furniture can be developed to meet the youths need to see each other, move and make their marks in the public room. The theories about how youths uses the city are presented in the Theory chapter.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

Volvo Construction Equipment i Braås är världsledande inom tillverkning av ramstyrda dumprar. I Braås utförs därför en mängd olika testfall där man kartlägger utfallen genom insamling av data från CAN-bussar i dumpern. Om ett test går fel beskrivs det i en felrapport med tillhörande beskrivning av händelseförloppet. Idag finns det inget enhetligt sätt att visa händelse ihop med position.För att analysera insamlad data används idag CANalyzer. Fördelen är att det går att visa insamlad data på ett strukturerat grafiskt sätt.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

The project, Flexible Snowboard System, has been carried out by the project group independently and is a module developed for snowboarders, ski rentals and ski schools. The problems of today?s solutions are that they cause the user an inconvenient standing position when riding the ski lift or skating the transportation slope, also mounting, adjustments and disassembling of the bindings are time consuming and brings undesired wear to the screws and screw holes. In addition any adjustments require that the user steps out of the bindings and have tools at hand. Flexible Snowboard System is a universal module which means that it can be assembled with all of today?s snowboards and bindings.