The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

An increasing number of chemicals are being transported by ships along the Swedish coastline. Many of these chemicals may pose a threat to the environment. Accidents and spills are luckily rare, but nonetheless it is important to be prepared for a possible chemical spill. The Swedish Coast Guard is responsible for responding to chemical spills at sea, and has both equipment and trained personnel for the purpose. In order to prepare for a possible accident one also needs to know what is currently being transported at sea.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Population growth leads to an increased need for new buildings, both residential and commercial. The regulations of structural design also changes with time. From a sustainable community perspective it may be profitable if existing buildings, that no longer performs their original function, are reconditioned. Knowledge and understanding of the surroundings of the residence must be available. Regulations regarding accessibility to all has increased.

The background of this study is an article in the hunting magazine ?Svensk Jakt? where Karl Hedin claims that his sawmills has not noticed any significant moose damages in the timber. The purpose with the study is to find out the causes to the moose explosion and what it has led to in today?s forests. A questionnaire has been sent out to sawmills in the region Dalarna with the purpose of finding out if sawmills receive moose-damaged timber and what they think about how they foresee future development. There were two causes of the moose explosion, that had effects on the moose population. The first cause was that the moose hunters wanted to raise the moose population, and by raising the calf shooting and by saving the cows they succeeded. The second cause was changing methods in Swedish forestry.

We have the tradition in Sweden to build villas and houses with a wooden framework. It has become natural for us because we have so much forest in our country. Building with wood has advantages, it is easy to process, but also disadvantages, as it is sensitive to moisture.Finland has long made use of the thermal blocks to build villas. It is a type of bricks that are a bit like a sandwich element, with a core of EPS and concrete on both sides of the core material. The concrete is hollow, so that after the walls has been bricked up you pour concrete into the hollow bricks.The issue of this report is to find out if concrete can be an alternative to wood as framework material in villas.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

SCA is the largest private owned forest owner in Sweden, with an ownership of 2 million hectares of productive forestland. To manage the planning of such large areas and to fit the traditional organization structure of a Swedish forest company, the planning approach is subdivided into three stages; strategic, tactical and operational. The strategic part, based on a statistic sample of stands, returns a harvest level estimate which should then be implemented at actual sites in the tactical part. This procedure can lead to incompatible solutions as the strategic solution is not necessarily possible to translate into actual sites in the tactical plan. The geographic aspect is important in tactical planning due to the large costs for moving equipment and maintenance of a large number of forest roads.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

Det är viktigt med ett effektivt samarbete och en välfungerande kommunikation i dynamiska miljöer, till exempel vid släckningsarbetet av en brand. Bristande kommunikation i en sådan miljö skulle kunna få förödande konsekvenser.Denna uppsats bygger på material från studien ?Bridging Cultural Barriers to Collaborative Decision Making in On-Site Operations Coordination Centers?, där 32 svenskar samarbetade i olika lagkonstellationer med att släcka simulerade eldar i mikrovärlden C3Fire.Kommunikationsteorier visar på att personer samtalar med varandra efter en viss struktur; deras yttranden tenderar att komma i par, så kallade närhetspar. Denna studie syftade till att undersöka närhetspar i beställningssekvenser, i form av en beställning av vatten och/eller bränsle följd av en bekräftelse. Till sin hjälp hade försöksdeltagarna en datorskärm med en karta samt tillgång till ett e-postverktyg för att kommunicera inom laget.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

In 1997, the Swedish parliament adopted a decision on Vision Zero (nollvision) in the road and transport system. Vision Zero means that no one should be killed or seriously injured in traffic accidents in the road transport system (Prop. 2003/04: 160). For the Transport Administration in Sweden (Trafikverket), this means increased demands on security and signage at road work sites around the country. This in turn means increased demands on the contractors that carry out road work for the Transport Administration.

Fall accidents are a big problem in the construction industry today and stand forapproximately 23% of all accidents. Skanska is a construction company that has avision toachieve zero accidents. Eliminating fall accidents is one step on the way towards theirvision. The state of Skanskas fall safety has been analyzed in this thesis to show whichimprovements are possible in fall safety.A literature study has been performed in which Arbetsmiljöverkets (The Swedishwork environment authority?s) laws and rules, together with Skanskas own rules havebeen studied.