This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

In a society where adults set the conditions for children?s play and generate modern and at times technically advanced products, fundamental characteristics like simplicity, opportunities for motor skills training and learning tend to be neglected. Owing to this, the Linköping-based company Time In wants to introduce a new multifunctional product, which differs from other products in shape and function and lives up to the often overlooked, basic characteristics in a toy.With Time In as the assigner, the purpose of this master thesis has been to use simple means to produce a "learning by playing" concept. Since Time In sells toys and products suitable for children in nurseries and preschools, the development of the products has therefore included a study of nursery and preschool environments.The thesis has been carried out within the Product Design subject area at the Department of Management and Engineering at Linköping University. Concept development has been done in three phases: the Preparation phase, the Design phase and the Presentation phase.

AbstractThis thesis was conducted by Jenny Jansson and Maria Madsen, students at the Faculty ofTechnology and Science and the Innovation and Design Engineer programme at KarlstadUniversity, during the spring 2008. The thesis covers 22,5hp for each student. AnnaHolmquist and Chandra Ahlsell at the company FOLKFORM were the ones who requestedthe theis, their company are located at Stora Skuggan in Stockholm. Tutor for this thesis wasLennar Wihk and the examiner was Monika Jakobsson of Karlstad University.The given assignment came from FOLKFORM and the aim for the thesis was to create afurther development of two already existing lamps from an earlier collection at FOLKFORM,?Jaipur? and ?Modern Times?.

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

The report presents a thesis carried out on behalf of the company SAAB Training and Simulation which is situated in Huskvarna. The authors of this report are going to graduate as mechanical engineers focusing on product development and design, and this thesis should reflect the knowledge obtained during the education. The assignment, given from the company was to develop a concept of a stand that will constitute as a part of a mobile system for target practice. The reader get to follow throughout the project and can hopefully learn from the smart solutions and approaches that have arisen during the process.Today SAAB doesn?t have a mobile application in their portfolio that utilizes the benefits of their sensor measuring system, also called the LOMAH-bar.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

The setting of pupils' final grades in the Swedish upper secondary school system is the responsibility of their teachers and once grades are set, they are not open to appeal. This can be compared with the British system where an external, central examination board sets the final grades based on the result of externally marked examinations (A-levels). These grades are then open to appeal if it is felt that an injustice has been made.This research paper has been an investigation into how pupils in one Swedish upper secondary school attempt to influence their teachers in the grade-setting process and how these teachers are affected by these different methods. Five teachers in total were interviewed in a qualitative case study. The study has also taken up the controversial issue of how grades, which are set individually by thousands of teachers across the country, can be deemed to be fair and equivalent.The study revealed that pupils employ many different methods when trying to influence their teachers in the grade-setting process e.g.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

Betting under ordered forms has been around for a long time, but the recent increase in Internet betting and the large sums of money that are now involved makes it even more important for betting companies to have correct odds. The purpose of the essay is to calculate probabilities for outcomes of football games using a statistical model and to see if you can find better odds than a betting company.The data contains the 380 games from the 2004/2005 season and the variables form, head-to-heads, league position, points, home/away, average attendance, promoted team, distance and final league position from previous season. After performing an ordered probit regression we only find the variable ?form of the away team? to be significant at the 5 % level. We suspect the presence of multicollinearity and perform a VIF-test which confirms this. To fix this problem we perform a second ordered probit regression where a number of variables are combined to index variables. In the second regression we once again find only one significant variable.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.

AbstractThis paper is a comparative study of the final reports of the Norwegian and Danish power studies performed in 2003. While the Danish study found that democracy is thriving, the conclusion of the Norwegian power study was that democracy is in a crisis. The purpose of this paper is to find explanations to why the studies in two Nordic countries arrived at such different results.Methodologically, the paper consists of an ideological text analysis and critical analyses of the discourse. In order to study how the results of the power studies can differ so considerably, the following aspects have been surveyed; 1) external contexts (government inquiries); 2) work process (the researchers? background, role and co-operation); 3) the problem areas and themes studied; and 4) power perspectives.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

This study has been conducted with the purpose to examine the marketing effects of waiting lines on the customer- and brand experience. Our ambition has been to describe how the waiting line can be used to heighten the positive experiences. The study has had a qualitative, as well as an inductive approach towards the subject. The study is mainly based on nine interviews with a total of ten respondents employed at nine different companies relevant to the subject. In the final chapter of this study we present our results and conclusions..

The residential area Pennygången in Gothenburg is planned to be restored in a very expensiveway. As a consequence the rents will increase dramatically and about 80% of the peopleliving there today will have to move. Excisting social networks might be disrupted.The aim of this project is to illustrate a part of the present social network at Pennygången inthe form of a photobook.I have photographed 12 families in their homes. These families know each other in 36different ways. The final photobook illustrates all these friendships by presenting the familiesknowing each other in pairs..