The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Environmental problems are accelerating with energy consumption and the release of greenhouse gases as the major issues. This affects landscape planning mostly through environmentally hazardous transportation and heating of buildings. In environmental work, the term "Sustainable development" is often used. This term was coined in the Bruntland report in 1987. A number of frameworks have been developed to clarify the term and to remind the user about relevant aspects of sustainability.

This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

The objective of the present study was to evaluate distillers? dried grains with solubles (DDGS) as a protein source to rainbow trout (Oncorhynchus mykiss), by studying digestibility and growth measurements. One control diet, totally lacking DDGS, and three test diets were made containing 10 % (low), 31% (medium) and 51 % (high) DDGS respectively on dry matter (DM) basis. The control diet and the test diets were made to be as nutritionally equal as possible. Wheat bran was used to balance the fiber content of the diets.

Syftet med detta projekt var att studera inverkan av gröda och skördetidpunkt på kemisk sammansättning och vomnedbrytning av neutral detergent fibre (NDF) och torrsubstans (TS) i helsäd samt att jämföra ANKOM DaisyII in vitro-metoden med in situ-metoden med avseende på nedbrytningsförloppet i vommen av NDF och TS i helsäd. Havre, korn, rågvete och vårvete odlades i storrutor med tre upprepningar i fält. Hela försöket upprepades under två år (2002 och 2003). Varje storruta delades upp i två smårutor, som skördades vid tidig mjölkmognad respektive tidig degmognad. In vitro-inkubering skedde med ANKOM DaisyII-inkubator av 48 prover från båda åren.

Dagens hästägare utfodrar inte sina hästar med enbart grovfoder. Många av dem fodrar stora mängder kraftfoder och en del hoppas att det kommer förbättra hästens prestation. Spannmål har ofta ett förhållandevis högt energiinnehåll och lämpar sig därför i foderstater till hästar som har ett högt energibehov. Utfodring av stora mängder energi kan orsaka problem för hästen, bland annat i form av kolik och många stereotypier som vävning, krubbitning och boxvandring. Eftersom det finns hälsorisker med foderstater med mycket kraftfoder i, är det av intresse att undersöka hur olika kraftfoder påverkar hästens hälsa, ämnesomsättning och prestation men även om det går att ersätta kraftfoder med ett energirikt vallfoder.

SammandragDetta examensarbete utförs i samarbete med företaget Componenta Wirsbo AB. Componenta smider detaljer till den tunga fordonsindustrin. Företaget använder sig av sänksmide där materialet formas genom slag från två rörliga verktyg. Smitt material har mycket goda hållfasthets egenskaper samt en mycket homogen struktur.Företaget har som miljömål att minska sin uppvärmningsenergi med 5 %. Componenta arbetar även med ett Leanprojekt som ska leda till en mer kontinuerlig produktion.

SummaryAt the summer festivals and it?s campsites there are each year thousands of tents left behind. Last year, at the Peace and Love festival in Borlänge, 220 tons of garbage was left behind at the festival area, much of which is tents. 69% of festival goers have at some point left behind a tent on a festival campsite. Many of these tents is purchased very cheaply, for a single festival.

Syftet med litteraturstudien är att undersöka om prestationshöjande fodertillskott till häst har den angivna effekten samt belysa vilken funktion i kroppen på hästen de kan tänkas påverka. Studien är främst begränsad till ämnena bipollen, kreatin, L-karnitin, solhatt (Echinacea spp.) och fjärilsranka (Schizandra chinensis). Dessa ämnen är några av dem som finns med på Svensk trav- och galoppsports karenstidslista. Studien belyser dessutom andra ämnen som finns i fodertillskott, som järn, tiamin, koppar, riboflavin, niacin samt L-glutamin. För de flesta ämnena var resultaten från de försök som gjorts tveksamma.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.

Vallfoder är en stor och viktig del i mjölkkornas foderstat i norra Sverige. Produktion av ett högkvalitativt grovfoder är av stor vikt för att minimera behovet av inköpta kraftfoder. Kons dagliga konsumtion bestäms av hennes behov av näring och energi samt vilket foder hon erbjuds. För att inte begränsa konsumtionen med för stor volym foder behöver vallfodret vara av god kvalité avseende fibersmältbarhet och energiinnehåll. Syftet med detta examensarbete var att studera om fibersmältbarhet skiljer sig mellan sorter inom arterna timotej och rödklöver.15 olika sorter av timotej respektive rödklöver ingående i SW Seed?s sortprovning skör-dades vid tre påföljande veckor från provrutor i Röbäcksdalen, Västerbotten, för att mot-svara tidpunkten en vecka innan axgång/knoppning, veckan för axgång/knoppning samt veckan efter axgång/knoppning under sommaren 2009.