Pulp- and papermills expend vast amounts of water in order to produce pulp, paper and cardboard. Hence, they alsocreate vast amounts of waste water which has to be cleaned before it can be released into the receiving body of water. Insuch a wastewater treatment plant, tremendous amounts of energy are expended by the aeration in the biologicalcleaning process. This aeration is necessary to supply the microorganisms that shall decompose organic material withoxygen, which they need for their metabolism. The transfer of oxygen from the gas phase to the liquid phase isprimarily inhibited by surface-active substances in the waste water like resin acids or fatty acids.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This is a qualitative research paper, which aims to examine how religion classes are conducted in inner-city and suburban schools. Interviews have been performed with two religion teachers, one at Grindtorp School in Alby and one at the English Gymnasium in Södermalm. There have been performed interviews with eight students, four from each school. The students have a different age, sex and religious beliefs. With these interviews we can get a better understanding how the students of today?s school think about the religious education.

The purpose of this study was to investigate if preferences for high- and low context communication differed significantly between individuals from individualistic and collectivistic cultures, living in a multicultural environment. A quantitative survey was used as method and the survey was answered by 150 students at Jönköping University and Uppsala University. Two self-assessment scales, obtained from previous studies were used to measure the degree of the two cultural dimensions and communication styles. Two multiple regression analyzes were performed to investigate the connection between collectivist cultures preference for high context communication and individualistic cultures preference for low context communication, that has been found in previous studies. Two ANOVAs were also performed to investigate differences in communication style depending on sex and length of stay in Sweden.

Background: Previous studies have shown that intuition occurs in decision making in small enterprises. However, these studies have not illuminated which decision attributes leads to intuitive decision making.Purpose:The purpose with this study is to contribute with an increased understanding of which decision attributes leads managers in small enterprises to use intuition in decision making and why these decisions attributes have an impact on the role of intuition. The follow-ing research question will be answered in our study: Which decision attributes leads to intui-tive decision making in small enterprises, and why?Method: To answer the research question we have conducted semi structural interviews with managers in small enterprises to achieve a deeper understanding of the role of intuition. We have also used a method called Visual Card Sorting as a complement to the semi structural interviews.Result/conclusion: The result of our study indicates that the relevance and the uncertainty of a decision have the greatest significance in the use of intuition in decision making in small enterprises.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

The main purpose of this study was to examine how social work can be performed online, by a case study of Korrespondensgymnasiet that pursues distance education. The intention was to determine the possibilities and limits with the online communication between the school counsellor and the pupils. The study was based on qualitative semi-structured interviews with one school counsellor and five pupils and document analysis of three descriptions of the school counsellor?s profession. The theory that has been used in this study is the communication theory: Shannon and Weaver?s Model of Communication and non-verbal communication.

The aim of this thesis is to investigate the critique Richard Shusterman is raising towards Maurice Merleau-Pontys view on consciousness of bodily sensations and habit. Richard Shusterman critique towards Merleau-Ponty is found to have no other basis than Shusterman own subjective view on what the task of philosophy is..

The aim of this essay is to get knowledge and to evaluate if the media student has equal or evenbetter knowledge of information technology (IT) than his/her teacher. Today the student of IToften has knowledge of hard ware and soft ware sometimes even unknown to the teacher. Themain reason for this might be that IT hitherto has played no prominent part at the institutes ofteacher education. Continuing further education of IT for teachers is also eligible as IT still is arather new subject on the time table.To adopt an empiric approach to the problem I have used trough interviewing and questions bothteachers and students at two upper secondary schools in the province of Värmland. The schoolsare called ?A? and ?B? in my investigation.Does the teacher have enough knowledge to give the student relevant knowledge concerninghard ware as well as soft ware to handle the computer and to utilize its possibilities? How can theteacher act to comply with the students? claims and demands?IT-knowledge can be expressed in a complicated way but I have limited my investigation to therole of the teacher and how he/she manages to teach and instruct concerning a selected numberof soft ware and how the students evaluate their own knowledge compared to that of the teacher.My investigation shows that the teachers consider their knowledge relevant for their task asinstructors and teachers.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.

In the debate on laying hen welfare, and specifically housing conditions, the main focushas been on physiological and behavioural measures. What is lacking is knowledge of howthe hen experiences the situation ? her state of mind.This study is an attempt to gain insight into the private mental states of former batteryhens. It uses a cognitive bias method based on spatial judgement, i.e. judgement of aambiguous stimulus placed spatially in between a reinforced and an unreinforced stimulus.This method has previously shown differences in judgement by animals in enriched versuspoor housing.

Scania intends to introduce a new maintenance program for their rolling fleet. Withthis new program Scania hopes to increase their competiveness and add furthercustomer value. This thesis report is a mapping of the current maintenance program,along with its problematic features. Furthermore the report intends to describe thenew program, Condition Based Maintenance (CBM) and the problems that Scaniamust deal with before they can implement it.The report compiles basic information on how a mapping should be performed.Further on it will describe some of the theories of LEAN and leadership. Which aretwo of the most important features in this thesis work.The work has been performed through visits in different workshops, whereinterviews have taken place.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.