Floating housing is a concept gaining ground in Sweden. The dwellings are different in many ways from traditional homes, not only regarding flotation, but also several other technologies. The purpose of this thesis is to emphasize the qualities that exist in living on water. The ambition was to present a proposal for a floating residential area located in Jönköping, containing homes of varying sizes, and to present their technologies. In order to find inspiration and solutions studies have been made on existing floating homes in Stockholm and Kalmar, focusing on their technical and functional solutions.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, drawings, aquarelles,postcards and photographs).

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

Real estate is defined as ground, which is divided into property. Ground means every part of the surface, which is situated within the country. There is no legal definition of property to be found. Property is usually explained as every unit, which legally should be registered in the register of landed properties. To constitute a property the property must permanently be suited for its purpose.

Vad är ett ?Urban building??Den första tanken som slog mig var en byggnad liknande ett komplex, med en mängd olika funktioner.Därför blev det ett självklart val för mig var byggnadens footprint skulle vara, när jag såg den "övergivna" landsplätten. Jag skulle vilja kalla den för en tom lucka kanske. Vidare tänkte jag vad detta komplex av byggnad skulle vara. För mig var det viktigt att skapa en mötesplats för människor, men med det sagt, inte ett kommersiellt centrum.

It is sixty years since Sweden's first star-shaped housing estate was built in Gröndal, a suburb of Stockholm. Olle Engkvist, the building contractor, was the driving force behind the residential area and it was designed by architects Sven Backström and Leif Reinius. The estate comprises detached star-shaped houses suited to a more hilly terrain and terraced star-shaped houses on the flat land. The eight gardens of the terraced houses form the shape of a hexagon. It is these gardens, designed by Sven Hermelin and Per Friberg, which are the main focus of this thesis. The buildings on the estate have recently been renovated and it is now time for the gardens to be restored.

This thesis explores the narrow spaces between closely built houses in the over 300-year-old wooden town center of Mariestad, Sweden, and their potential as time capsules and sources of knowledge in cultural-historical building investigations. By interpreting well-preserved carpentry work on a facade in one of these spaces, the study aims to provide an example of how these preserved spaces can serve as a source of knowledge and understanding of craftsmanship and the history of the place. The thesis also addresses the municipality of Mariestad's work with cultural heritage, as well as maps out more of these potentially interesting interstitial spaces. Old Swedish wooden towns possess a high degree of uniqueness both nationally and internationally; nevertheless, they are subjected to relatively significant threats of demolitions and substantial changes, often in the form of many smaller restorations or changes over a long period of time. The focus of the case study is a window from the 16th or 17th century and the facade's old, hand planed wooden cladding.

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

The topic of our thesis is Packaging Design as a Brand Building Tool and we are presenting the Scandinavian perspective. We found the topic interesting because, from a theoretical point of view, we identified a scarcity in research focusing on packaging design as a brand management tool, and from a practical point of view, we found out that businesses use packaging design at different levels in their communication efforts. Thus we wanted to provide both academia and business world with a clear picture to what extent and how businesses use packaging design in their brand-building process. Therefore the aim of our thesis is to provide practitioners and academicians alike with a better understanding of how packaging design can be used to create strong brands in the FMCG sector in the Scandinavian market. To reach the stated aim first we provided a solid theoretical background of packaging, its elements and its role in the marketing mix.

Social games have become a digital phenomenon over the last few years, affecting a lot of peoples everyday life. This paper focuses on how social games can affect workplace relationships. Through qualitative interviews I investigate how people who play with their colleagues experience the social games and their influence on the social interaction in the workplace. 10 interviews were carried out with people from four different organizations. The findings from these interviews were then put in relation to previous research and existing theories concerning workplace relationships and social games.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Since feeding fodder crops to dairy cows is a heavy and time-consuming but often disregarded line of work, this study wishes to view the different possibilities that are currently available to decrease the time to feed and apply this knowledge on an existing farm. For this purpose, four farms have been studied due to what feeding systems that are currently used and how long time the feeding required. The occurring systems are either mobile, i.e. a feed mixer operated by a tractor witch feeds the cattle via a drivable fodder table, or a stationery mixer, i.e. an electrically powered mixer which fills an automatic feeder.

The purpose of this thesis has been about processing an already existing folder for a tax funded organization which is also the employer for this mission ? Expectrum. The reason is that both Expectrum themselves and the recievers of the folder are unhappy with the existing material. The critic that has been directed to Expectrum is that the recievers have trouble understanding what Expectrum is and what they do. Based on qualitative methods such as interviews and text analysis I?ve been able to answer my questions for this thesis.

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.