Crypreservation of oocytes is recently being considered to be a valid choice in infertility treatments.Low survival and fertilization rates due to inefficient slow freeze protocols have been the outcome ofmany previous studies done in the field. However, introduction of the vitrification technique and itsapplication in reproductive medicine and to some extent new improved slow freeze protocols haveshown that oocytes can be cryopreserved with successful outcome.In this project the survival rate of oocytes after vitrification with MediCult Vitrification andWarming Media has been studied. Also, a comparison of the carriers Cryoloop (an open system) andCryopette (a closed system) has been performed.A total of 43 oocytes were vitrified and warmed according to MediCult's protocol, of which 21oocytes with Cryoloop and 22 with Cryopette. The cells were post-thaw incubated in a physiologicalenvironment for 24h. During that time the morphology and viability were observed and noted after 2h,over night and after 24h.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

Since 1996 the Swedish households have ten folded their volume of loans for own homes that is attached to a floating interest rate. Also in 1996 the Swedish electric market was deregulated. These two facts have increased the volatility in the household expenses for these two commodities. This thesis studies the risk for homeowners attached to the exposure against the electric and the credit market. The risk model used is Cost-at-Risk which is usually used by public authorities for analysing the risk involved with national debt.

AbstractBusiness, or business decisions always involves an endangerment from the company?s aspect, but when it comes to business with foreign countries the risk profile looks quite different from the profile the company has when its doing business inside the country. Therefore, it is extremely important for an export company or import company to carefully consider the risks that are enclosed with the deal, before he makes the decision to enter a deal. One of the most important risks a company have to considerate when doing business with foreign countries is the currency risk. A company is exposed to currency risk when either long-term or short-term changes in the exchange rate may affect the result of the company, competitive position and growth.

Knowledge in reproduction in the Swedish lynx (Lynx lynx) is important forseveral reasons. Situated on top of the food chain, lynxes may be at risk of beingexposed to environmental toxins that could have adverse effect on reproduction.The population of lynxes is today managed by restricted hunting which demandsknowledge about both the lynxes numbers and their reproduction. In addition,lynxes may function as indicators of climate change for instance if their season ofheat would be earlier or prolonged due to a warmer climate. Today?s knowledgein reproduction in Swedish lynx is mainly based on information gathered fromradio collared animals.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Detta examensarbete genomfördes våren 2013 på Karlstads universitet där TD Rail & Industry i Västerås stod som uppdragsgivare. Projektet innefattade att kartlägga nuvarande omlastningslösningar av enhetslaster mellan järnvägstransporter och vägtransporter, och utarbeta en konceptuell omlastningslösning med fokus på att öka järnvägstransporternas flexibilitet gentemot vägtransporterna. Där vikten lades på att utarbeta ett välarbetat helhetskoncept.Projektet genomfördes med designprocessen som grund och innehöll bland annat momenten; förstudie, kravspecificering, idégenerering, konceptval m.m.Resultatet blev en vidareutveckling av det redan befintliga systemet CCT som bygger på horisontell överföringsteknik och möjliggör därför omlastning av enhetslaster direkt under kontaktledning. Skillnaden mellan RES och CCT är att man tagit bort ombyggnationen av tågvagn och lastbilschassi, som var en av CCTs stora svagheter, genom två hydrauliska ?teknikplattor?.

The primary purpose of this paper is to find the determinants of first-day returns on the Stockholm Stock Exchange. Our research will cover the 1996 ? 2004 periods. Our secondary purpose is intended to find a profitable trading strategy with regard to future IPOs on the Stockholm Stock Exchange. By using regression analysis, focusing on company specific factors and the IPO process, we hope to find a function exhibiting statistical significance, determining future first-day returns from which construction of a profitable trading strategy will be possible.

Brämhults Juice AB is one of Sweden?s leading producers of fresh fruit juices and drinks. The fruit drinks last 3 days once opened and when stored in a refrigerator kept at 7°C. Since factors that shorten the drinks? best before date are usually not noticed until the entire batch has expired, it would be advantageous to find a way to accelerate the drinks? natural deterioration, so that an unusal short best before date is noticed before more products are shipped off to the stores.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

This study was made as a part of a feasibility study on a polishing wetland at Rimbo wastewater plant (wwp) in Norrtälje municipality. The wwp had to decrease the nitrogen discharge to reach the limit 15 mg tot-N/l. The nitrogen in the outlet was mainly in the form of nitrate, hence the wetland mainly ought to support denitrification. The proposed area for the wetland was situated right next to the wwp and was already in the municipalitys posession. One aim of this study was to examine what spieces of plants needed to achieve highest possible denitrification.

Syfte: Syftet med denna studie är att undersöka om det finns ett samband mellan redovisad nedskrivning av goodwill och börsvärdet hos företag noterade vid London Stock Exchange mellan 2009 och 2012.Inledning: EU införde 2005 en ny standard för koncernredovisning. Syftet med den nya redovisningsstandarden, IFRS 3, är att öka relevansen, pålitligheten och jämförbarheten i den finansiella rapporteringen. Detta medförde bland annat att posten goodwill inte längre får skrivas av enligt plan, utan årligen ska testas för eventuell nedskrivning.Metod: För att fylla studiens syfte har vi använt oss av en kvantitativ undersökning, där relevant data har samlats in via marknadsdata och analysverktyget Bloomberg. Studien genomfördes på de största företagen registrerade på London Stock Exchange med undantag för de företag som inte hade den data som krävdes för att vara relevanta för studiens syfte. Svaren analyserades genom multipel regressionsanalys samt deskriptiv statistik framställda i statistikverktyget Minitab.Slutsats: Undersökningen visade att det finns ett statistiskt signifikant negativt samband mellan nedskrivning av goodwill och börsvärde.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.