Background: Businesses are traditionally valued with the so called Discounted Cash Flow-model. When valuing newly-started businesses, surrounded by high uncertainty, and whose capital mostly consists of unrealized business opportunities, the Discounted Cash Flow-model needs to be complemented if the total value of the business is to be captured. A valuation with the help of real options is capable of valuing these unrealized opportunities, which often exist in newly-started businesses. The unrealized opportunities are to be found in the business plan of the business, why this needs to be valued to capture the total value of a newly-started business. Purpose: To demonstrate what the use of real options can result in when valuing businesses.

This master thesis was written for Arla Foods and the result of the thesisserves to gain Arla Foods in its work with chemical hazardous and to bringnew academic results. The thesis aims to create a common methodology forrisk analysis with the handling of chemicals.The theories displayed in this thesis focuses on different risk managementmethods in order to build up a framework out of which a risk management toolwas created. The main primary data source consists of interviews held withemployees within Arla Foods at different facilities.The risk management tool can be found in appendix K.Available recommendations for how to evaluate risks with chemicals can befound at appropriate government agencies. These recommendations aredrawn up to suite small and medium enterprises and therefore are to narrowto make a good foundation for analysing chemical risks at large companies.With the legislation and government demands in mind, a tool has beencreated to fit a large company?s needs when managing chemical risks.

The main goal with the master thesis has been to do a status evaluation of the chain machinery with its start chain and wire to secure the production on a short basis due to that a reconstruction is not planned at this time. An evaluation of the condition of the start chain and the rollers in the chain depository has been done. An offer has been requested for a new start chain and the evaluation of the start chains may be a basis for the decision taking. The production has been able to go on, although it has arisen some problems which have been difficult to find the causes for. There is no gathered ?picture? of the machinery status and a mapping of each machinery has been compiled of comprehensive logs.

Managementmodeller med inriktning mot processorientering blev populära i slutet av 1980-talet och början av 1990-talet och ett flertal olika modeller togs fram, marknadsfördes ivrigt av konsulter samt implementerades i många företag. Några av dessa modeller fick större genomslagskraft än andra. Många av dessa modeller blev så kallade managementtrender som fick stor uppmärksamhet under en period men sedan försvann. Litteraturstudier förde oss in på att Total Quality Management (TQM) och Business Process Reengineering (BPR) är två modeller som rönt stor uppmärksamhet. Det som intresserade oss vid litteraturstudierna var att studera hur dessa modeller upplevs i näringslivet idag, 10-15 år efter att de slagit igenom.

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

Intense competition among companies and luck or unavailability of certain resources in country of company?s origin force last to cross the borders, and start to hunt for new markets and cheaper inputs. However, by investing abroad the company is not only facing and dealing with cultural differences and new regulatory framework, but also becomes dependent on decisions and actions of different and to large extend unknown government. Moreover, the majority of the investments? flows are directed to developing countries, where power and capabilities of state authorities are considered to be more extensive than in countries of developed economies.

Background: The difference between the market value and the book value of the companies has dramatically increased. One explanation is that the inflow of capital on the market has increased. Another explanation is that companies have a larger share of intellectual capital. The question is how this has influenced the company-valuator's use of valuation-models? Purpose: The purpose of this study is to find out what relevance the substance valuation model has, the DCF-model has, and also discover new valuation-models, among company-valuators.

Abstract The main purpose of this study was to investigate if and how the employees in elderly care experience stress and which underlying causes they understand to be important in their work situation. The purpose was also to investigate whether Karaseks and Theorells demands and control models could be used to explain the employees feelings of stress and to see in which categories the participants are in. Furthermore, the purpose was also to understand the participants work situation and to describe the factors and remedies the employees perceive to contribute to the stress levels at their workplace. 81 questionnaires were distributed at three different locations, two of which were in Ronneby and one in Örebro. 56 people answered the questionnaires. The result yielded that 80% of the participants felt stress during their working hours the last few years. The results are in agreement with the demands and control models which showed that people with high demands and low control experienced a higher degree of stress than people with lower demands and higher control, which corroborates the hypothesis 1.1..

This is a thesis in Personal- och Arbetslivsprogrammet at Dalarna University with thepurpose of evaluating an education initiative in Borlänge kommun. The educationCoaching Leadership is an initiative for the managers in the organization to exercisegood leadership and the education also serves as an incentive for managers. Eightbusiness managers and one from the HR staff have completed the training. Out of thetotal 9 participants in the training, six of them took part in this evaluation. Based on thethesis aim and questions we wanted to explore participants' attitudes to the education,and what skills and abilities they have acquired on the basis of educational goals andcontent.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

A significant amount of a teacher?s work consists of evaluation and marking of the students, which involves a great responsibility. This essay put the teacher?s evaluation of the students in focus. Today?s course Idrott och hälsa A, at the upper secondary school level, consists of 100 points and all students take this course apart from students attending apprentice programs.

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

This is a thesis in Personal- och Arbetslivsprogrammet at Dalarna University with thepurpose of evaluating an education initiative in Borlänge kommun. The educationCoaching Leadership is an initiative for the managers in the organization to exercisegood leadership and the education also serves as an incentive for managers. Eightbusiness managers and one from the HR staff have completed the training. Out of thetotal 9 participants in the training, six of them took part in this evaluation. Based on thethesis aim and questions we wanted to explore participants' attitudes to the education,and what skills and abilities they have acquired on the basis of educational goals andcontent.

When models are used to describe physical phenomenon during development or modification of a technical system, it is often possible to reduce both the time needed and the overall development cost. With the use of models it is also possible to investigate the potential of the selected solution, without the need for any expensive details and testrigs. In many cases it is also not possible to test all the aspects regarding the functionality that are desired from the system, without using the complete and final product.In this case a model based approach has been used to optimize the different parameters in the new snubbing mechanism for the Nose Landing Gear Retract Actuator on the JAS39 Gripen.During the simulations, upper and lower boundaries were calculated for the length of the spring and the diameter for the restrictor. The governing constraints were given by the requirements for the retraction time during cold conditions and that the amplitude of the alternating loads in the uplock mechanism were brought to an acceptable level.The most promising results from the simulations were then used in a limited number of trials in the hydraulic rig to verify that the configurations comply with the requirements.The final parameters for the snubbing mechanism were chosen to 35±1mm for the spring and 0.4-0.5 mm diameter for the restrictor..

Companies acquiring ERP systems are often dissatisfied with the project and therefore consultancy firms wish to make use of project models in order to achieve success in implementations. Since research on ERP implementations in service companies is limited, there is a need for mapping of critical activities in implementation projects in this line of business. Under these premises, the purpose of our master thesis is to develop a model for implementation of ERP systems, specified in activities, which can be used by mid-sized consultancy firms with mid-sized qualified service companies as customers.A literature study including project models, modern models and methodologies for ERP implementation, commonly existent activities, success factors and system development methods was carried out. Starting out with this, a theoretical model for ERP implementation was generated. In excess of this, a case study was conducted, where the implementation of the ERP system Microsoft Dynamics AX at the service company Eurostep, performed by the consultancy firm Medius, was studied.