This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the Equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping Equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

When traffic in large cities increases, it becomes more vulnerable to disturbances such as accidents, stalled vehicles or construction; therefore, traffic jams are more likely to occur. For better control of the traffic at a disturbance the Swedish National Road Administration (SNRA) has traffic Equipment which can be controlled from a command centre. This traffic Equipment consists of gates and signs with variable messages. This report will discuss the system used for traffic control in Stockholm. It will present proposals designed to improve it.

Hypothermia during anaesthesia is a well-known phenomenon that may cause several side-effects such as greater risk of postoperative wound infection and increased risk of heart complications. The most efficient way to avoid this is to prevent hypothermia from occurring. The aim of this paper was to compile the research on the most efficient way to prevent hypothermia during anaesthesia for cats and dogs, and to compare these results to how Swedish animal hospitals prevent hypothermia today. To investigate this, a survey was sent out to several animal hospitals around Sweden to see what methods they used to prevent hypothermia in their clinics. It is difficult if not impossible to prevent the body temperature from falling slightly when anaesthesia is induced because of the drug interactions in the body that follow from the drugs given. A 1-1,5°C decrease in body temperature is to be expected and is difficult to avoid.

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Abstract In high voltage substations there is an increasing demand for computerized Equipment, and automation of operation and supervision. The future primary Equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring Equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

This degree projekt deals with Skanska´s safety at the construction site with focus on personal safety Equipment. The purpose of this dissertation is to examine how the rules of personal safety Equipment are applied and experienced at Skanska´s construction sites.In October 2004 Skanska started a projekt to make the construction sites more safe. With use of a questionnaire we have made a survey at different construction sites. 80 questionaires have been handed out to Skanska´s employees in the southeast region. While they were handed out we conrolled if the employees at Skanska´s construction sites used head protection, easy visible clothing, safety shoes and identification cards.The result of the survey shows how the rules are applied.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and Equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting Equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

Title:The issue of unplanned stoppages caused by failure in medical technology Equipment ? A study within the hospital of Kalmar with a focus on manage-ment, security and quality Author:Anna Förster, Ambika Linder, Sandra Nyqvist Tutor:Thomas Karlsson Institution:Linnaeus School of Business and Economics - Linnaeus University Kalmar Date:2011-01-14 Purpose:The purpose of this study was to examine unplanned stoppages caused by medical technology Equipment failure in the healthcare operation within the hospital of Kalmar. Our study is based on a number of specifically selected incidents which show the consequences these disruptions cause in management, security and quality within the operation. Our intention was also to examine what role the medical technology department of the hospital plays in the care production operation during these unplanned stoppages. Method:Through a qualitative study we have generated material from a number of interviews with staff working in the hospital of Kalmar.

Water logistics has long been a problem in order to effectively carry out stump treatment in both thinning and final felling. It is important that the stump treatment? Equipment is configured as well as a sufficient amount of water is carried out on the harvester to get a cost? effective treatment. The flow control of the Equipment has improved and water can be dispensed more efficient, but still the amount of water on the machine is a crucial factor in the total cost estimate. The knowledge of the tools available to bring water as well as the internal logistics of loading and transport to the felling site is deficient. Increased focus on "smart" solutions to manage water cost is of great importance in order to combat Hetrobasidion spp in both thinning and final felling. The purpose of the study is to describe and summarize different solutions of water logistics at stump treatment in final felling.

When rubber Equipment in a milking system ages, physical and chemical deterioration occurs and cracks, crevices, as well as deposits of organic and inorganic material is formed on the surface. Bacterial colonization can accumulate, especially on ageing rubber Equipment and if the cleaning procedure is not functioning properly. Formation of biofilm in milking Equipment could in turn cause bacterial contamination of bulk tank milk. ATP bioluminescence is a fast and easy way to determine the hygienic status of a surface based on its ATP content, and results are given in relative light units (RLU). The method measures both bacterial contamination as well as residues from other organic material.

In industries today the demand for reading the state of industrial Equipment and thus prevent machine breakdown, is increasing. The company HMS Industrial Networks AB has a product on the market, Netbiter EC350 that is used to read sensors and thus find out the condition of industrial Equipment. By reporting scanned data to users through a cloud service, users can keep track of their Equipment. When developing Netbiter EC350 a slot was made for a Bluetooth module to offer clients a wireless reading in future developments. In this project a prototype was made to show how this Bluetooth communication can be implemented. The goal of the project was to create a Bluetooth communication between a Bluetooth sensor and Netbiter EC350. A user interface was made to allow the user to read sensor values. The result of the project shows how a Bluetooth communication can be implemented to read sensors wireless and therefore it fulfills its purpose and goal.

Extensive cattle management was reintroduced in Sweden during the 1950´s and 60´s. Usually this term refers to suckler cows for meat production that is kept outdoors all year around. Suckler cow farms tend to become fewer but bigger over time. Still however most of the farms with beef cows are small. Extensive animal husbandry can lead to animals becoming shy which leads to difficulties when they are handled due to veterinary treatments, marking, transport etc.

Titel: Investeringsuppföljningar ? En fallstudie på Volvo Construction Equipment i BraåsSeminariedatum: 2011-06-01Ämne/kurs: 2FE13E:3Författare: Aleksandar Stamenkovic och Donald BergströmHandledare: Anders JerrelingExaminator: Fredrik KarlssonNyckelord: Post-audits, Capital Budgeting, Investments, Performance Evaluations, ROI, RI, AARRSyfte: Syftet med detta ämnesfördjupande arbete är att förklara de problem som uppstår när avsaknad av investeringsuppföljning föreligger, samt att förklara för hur rutiner av uppföljningar kan organiseras.Metod: Valet föll på att göra en kvalitativ fallstudie gällande Volvo Construction Equipment i Braås. Kvalitativa semistrukturerade intervjuer har utförts med fyra stycken respondenter på anläggningen. Detta ämnesfördjupande arbete har utförts enligt en deduktiv metod och en diskussion förs angående arbetets validitet och reliabilitet.Teori: Den teoretiska referensramen behandlar relevant teori gällande investeringar och uppföljning, vidare behandlas även kortfattat de metoder som används för att bedöma investeringars lönsamhet på Volvo Construction Equipment i Braås.Empiri: Det empiriska avsnittet redovisar data från de semistrukturerade intervjuerna som fördes med personal på anläggningen i Braås. Dessa bestod av ekonomichefen, controllern samt två projektledare.Slutsats: Resultaten som presenteras behandlar komplexiteten med att följa upp investeringar enligt dess faktiska kassaflöden och förkastar därmed en sådan uppföljning för Volvo Construction Equipment i Bråas.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic Equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.