ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The purpose of this research is to examine the implications of the provisions in the Swedish Code of Corporate Governance (the Code) concerning auditor attestation of the internal control report. We will focus on how the auditors? augmented responsibilities will affect the efficiency in the audit process.Our research indicates that the main benefit from reviewing the internal control report is achieving more reliable internal controls, which results in greater prevention of misstatements in the financial statements. This will affect the efficiency in the audit process since the auditor can place more reliance on internal controls when performing audit procedures. This implies that the benefits of preventing misstatements could outweigh the efforts and resources spent on reviewing the internal control report..

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

Title: Audit teams ? what affects the efficiency?Authors: Petter Johansson and David RubinSupervisor: Andreas JanssonCourse: Dissertation Accounting, 4FE03E, 30 ECTS, Spring 2011.Key Words: Audit team, Efficiency, Team WorkBackground and problem: Theory and literature in the field of audit teams?efficiency are limited. The theory and literature that existed was not conducted inSwedish context. It was identified that no one had examined the factors thatinfluence the efficiency of the Swedish audit team's. Efficiency affects howresource-and cost-effective an auditing firm can be while the audit is performedwith quality and therefore it is of interest to be examined.Purpose: The purpose of this thesis is to explore and explain what may affectSwedish audit teams? efficiency during the work processMethod: The thesis has been based on existing theory and literature to explainwhat affects audit teams? effectiveness.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The purpose with this examination is to build a measureequipment to AerotechTelub AB (AT), who will registrate fault in SRAM-memory in contact with cosmic radiation. The equipment will be created around developcard from Memec Design with FPGA from Xilinx. The logic in the FPGA will be implemented with the hardwaredescribed language VHDL. The SRAM-memory that will be tested is build in CMOS-teknologi. The memorycells will be loaded with a predecided bitpattern.

Swedish healthcare is in continuous need of cost savings and efficiency improvements in order to meet the increased demand for care. The theories of lean, developed from the industry, are applied more frequently on healthcare systems to increase effectiveness and reduce waiting times in patient processes. However, some processes seem to be more successful in their lean implementation than others. In this thesis, factors influencing flow efficiency in lean healthcare are examined. Through interviews with the top executive board at Capio St Göran's hospital, data is collected in order to analyze reasons for success.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The main focus of the essay is to investigate if bugging can be justified from two ethics perspectives, the teleological and the deontology. I?ve chosen to emanate from two specific values which I believe is especially relevant to the ethical problems of bugging, efficiency in fighting crime and the personal integrity. To be able to illustrate this conflict between different values did I do an analysis of an official report which had the task to explore if Sweden should introduce bugging as a new means of compulsion. The official report's statement was that the police should have modern instrument to fighting crimes efficient, including bugging.My examination of the report showed that they used several arguments derived from both the efficiency in fighting crime perspective and the personal integrity perspective.

The valuation of an asset is one of the most important thing with accounting, though one of the most difficult thing as well. However, in deciding useful service life for an intangible asset and property, plant and equipment, there are quite a margin for the companies, which creates a difference between companies and industries. When computing the value of the inventories there are a few possibilities available for the companies, which also can generate differencesbetween companies and industries. Although these differences can occur, there might be some similarities in the companies? estimates.

This study aims at norming a new objective method to track and measure jaw movements in 3D (three dimensional) during chewing in the young adult population (n=41, age 22-30). Norm values of the range of movements and the duration were calculated. Intra and inter rater reliability was high. Masticatory efficiency among participants was evaluated with a two-colored wax, analyzed with picture analysis software. Regression analysis was used to calculate the relationship between movement and duration variables and masticatory efficiency.

The valuation of an asset is one of the most important thing with accounting, though one of the most difficult thing as well. However, in deciding useful service life for an intangible asset and property, plant and equipment, there are quite a margin for the companies, which creates a difference between companies and industries. When computing the value of the inventories there are a few possibilities available for the companies, which also can generate differencesbetween companies and industries. Although these differences can occur, there might be some similarities in the companies? estimates.