The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The Stockholm office market segment have for a long time been considered a safe havenwhen it comes to withstand negative turmoil in the form of rental compression due toeconomic fluctuation, especially in the CBD demographic. Recently however, a large numberof banks and institutions, amounting to some 200000 square meters, have decided to relocateto more peripheral locations with the aim of cost reductions on rent. This mass exodus isstudied with focus on rental dynamics as the result of increased vacancies. Other variables arestock changes and employment. The method is econometric combined with an interviewseries.

The aim of this essay was to create an understanding of teachers strategies to respond to children in economic hardship in school and if these children can participate on equal terms in school. To examine this, we chose to do semi-structured interviews which is a qualitative method. Eight teachers were interviewed from four different elementary schools. In our interviews, we found that all the schools both had elements of inclusion and exclusion, which can result in both equal and unequal terms for participation in school. We also found that the school with the most students in economic hardship had the most inclusive strategies.

The purpose of this study was to compare normal electroretinographies (ERGs) from three different canine breeds in order to evaluate if there were any marked similarities or differences between these breeds as to ERG responses. It is known that healthy dogs from different breeds but also dogs within the same breed but in different age categories may have different appearances of their ERG responses. This may be a problem when evaluating if an ERG is normal or not from a dog within a breed not previously examined. Because of this it is important to obtain normal values for each breed and age group in order to be able to use these for later comparisons of ERGs obtained from individuals affected with various retinal diseases. In this study we have chosen to examine dogs within the three breeds: Labrador Retriever (LR), English Springer Spaniel (ESS) and Chinese Crested Dog (CCD). All of these breeds may be affected with hereditary retinal diseases such as Progressive Retinal Atrophy (PRA). It is possible that ERG-responses vary due to a number of different factors.

Arcoma is a company that develops and manufactures X-ray equipment for hospitals. One of the most crucial components is the digital detector. Due to the high cost it is made removable so it could be transferred and used in other X-ray apparatus. The detector is placed in a so called detector holder. The current detector has a rectangular shape which sometimes requires a 90 degree rotation to match the shape of the patient.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

Buildings worldwide account for 40 % of the total energy use. Climate change is of increasing importance, but few are willing to reduce their standard of living or get a higher cost for the change. Energy efficiency of existing buildings gives the greatest benefit economically and environmentally. The real estate company Klövern AB manages 46 properties in Karlstad. Heating is the major cost of the total operating costs of real estate. Rising energy prices increase the need for Klövern AB to improve energy efficiency and to investigate alternative sources of heat.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

Calculations of net present value are based on a discount rate, which requires knowledge about the company?s cost of debt. A common way to do this is by observing the company?s credit rating, when no credit rating is given it?s possible to use a synthetic rating model based on quantitative data to estimate a credit rating. Thus, the aim of this study is to increase the understanding of which quantitative data, in terms of key figures, that can be used to explain the given credit ratings for companies from the Nordic countries.In developing the model, key figures found significant in previous studies are being tested for whether or not they are applicable for companies from the Nordic countries.

In this study the practical work with the EU Water Framework starts on the island of Gotland. 33 lakes and 32 streams have been characterized and classified regarding to their ecological status. The aim with the characterisation is to create a uniform discription of all waterbodies and a comparable estimation for the future. The aim with the classification is both to study the waterbodies ecological status and to gain knowledge of where the resources should be concentrated so that the ecological status in all waterbodies will be good in 2015.The characterisation has been done according to the EU Water Framework Directive, and the factors that have been applied are the mean depth and area of the lake. The length and size on the catchment area are the factors that have been used on streams.

In Sweden plans to build high speed railways have been around since the early 1990s and the planshave developed to be more precised since. The future Swedish high-speed rail network is supposedto consist of two lines. Götalandsbanan; from Stockholm to Gothenburg, and Europabanan fromJönköping through the Öresund Region to Hamburg.The description of the aim to build high-speed railways in Sweden has in former reports always beento achieve rapid passenger traffic between big Scandinavian cities and Europe. There are almostnothing mentioned about the possibilities of high-speed transports of cargo on these railways. Thisstudy aims to clarify the freight transport market for Götalandsbanan and Europabanan.Today there is only one transport system with high-speed freight trains.