In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

The aim of this thesis is to analyze the academic discipline translation studies; the analysis centers upon bibliometric aspects, and is carried out chiefly by means of quantitative methods, enabled by the databases Web of Science and Scopus as well as by the corpus-linguistic software Wordsmith; however, this quantitative focus is complemented by auxiliary qualitative means of investigation, i.e. a discourse-analytically oriented study of a corpus of domain-endemic reviews.A number of core journals are analyzed in order to show what and whom are cited in translation studies, and, furthermore, what adjacent domains hold sway over it; attention is also given to influential authors, regions and languages operating within the domain. It is shown that the domain under scrutiny is quite differentiated, even fragmentary; the term pluricentric is used to describe this tendency towards sprawling. No superior authors (in terms of publication frequency) emerge, which arouses the suspicion that the domain may be conditioned by a hierarchical divide between journals and monographs. Furthermore, it is clear that translation studies is a eurocentric domain: European languages dominate.

Den här kandidatavhandlingen undersöker fördelarna och begränsningarna med Internetbaserade operativsystem i molnet, så kallade Internet OS, och hur IT-företag ser på ämnet. Internet OS är operativsystem som placerar sina resurser och processorkraft ute på Internet, ofta med hjälp av olika molnettjänster. Det finns problem och utmaningar med Internet OS. Dessa problem kan vara ett hinder för företag att överge de traditionella operativsystemen, som exempelvis Windows, och övergå till Internet OS. Det saknas undersökningar om IT-företag vill eller kan flytta sin verksamhet till molnet. Vi vill ge en tydligare bild och bidra med ny kunskap om företags syn på Internet OS. Arbetet har genomförts med en litteraturstudie som har fokuserats på vad den akademiska världen vet om Internet OS med fokus på Chrome OS. Litteraturstudie går in på fördelar och nackdelar, samt framtida visioner.

Ordet ?design? används ofta för att beskriva hur en produkt ser ut, vilket gör att är lätt att förbise andra viktiga parametrar, exempelvis den låter, luktar eller känns. Inom taktliiteten studeras det sistnämna, nämligen hur en produkt känns i handen eller mot huden. Detta är subjektivt, eftersom alla människor har sin egen uppfattning. Därför kan information om detta enbart tas fram experimentellt genom undersökningar och mätningar.

Network RTK is a real-time technique for accurate positioning with Global Navigation Satellite Systems (GNSS). The technology means the use of correction data from a network of GNSS receivers with known positions (reference stations) to reduce the uncertainty in position for the user´s GNSS receiver (rover). However, this requires that the correction data can be transferred seamlessly to the user in real time. Commonly the corrections are transferred via mobile phones. The Swedish National Land Survey operates a nationwide Network RTK service, where users can receive correction data via GSM or mobile Internet (GPRS).

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

Three-dimensional computer graphics enjoys a wide range of applications of which games and movies are only few examples. By incorporating three-dimensional computer graphics in to a simulator the simulator is able to provide the operator with visual feedback during a simulation. Simulators come in many different flavors where flight and radar simulators are two types in which three-dimensional rendering of large terrains constitutes a central component.Ericsson Microwave Systems (EMW) in Skövde is searching for an algorithm that (a) can handle terrain data that is larger than physical memory and (b) has an adjustable error metric that can be used to reduce terrain detail level if an increase in load on other critical parts of the system is observed. The aim of this paper is to identify and evaluate existing algorithms for terrain rendering in order to find those that meet EMW: s requirements. The objectives are to (i) perform a literature survey over existing algorithms, (ii) implement these algorithms and (iii) develop a test environment in which these algorithms can be evaluated form a performance perspective.The literature survey revealed that the algorithm developed by Lindstrom and Pascucci (2001) is the only algorithm of those examined that succeeded to fulfill the requirements without modifications or extra software.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

Large areas of Lodgepole pine (Pinus contorta var. latifolia) were planted in the 1970s - and '80s. The purpose of the fast-growing species was to increase growth and with short rotation periods allow a rapidly increased harvest level. Today a large proportion of the young forests owned by Holmen Skog, Iggesund are covered by Lodgepole pine and an active forest management is required to spread the harvested volume over time which is desirable by a market perspective. The purpose of this essay is to investigate the possibility of spreading the harvested volume of Lodgepole pine over time.

The choice of harvest date for leys is one of the most important factors affecting the size and quality of the harvest. An early harvest gives a high nutritive value while a late harvest gives larger quantity. Today?s aim to produce high nutritive leys gives early harvest dates both in primary growth and regrowth in northern part of Sweden. The consequence is a growth in the autumn, a "third harvest".The aim of this master thesis was to study the effects of different harvesting systems and their effect on size, feed quality, wintering and economy for conditions in the northern part of Sweden.

Recent developments suggest that private and public companies are moving towards a more service-oriented business. Service orientation means that hardware is often sold in packages with service agreements, which makes the investment more difficult to assess. The challenges that arise will be to assess the value of the overall package, the information needed to make informed decisions and the operational requirements in combination of hardware, software, support agreements, training and more. The paper therefore aims to examine how decision makers can evaluate the benefits of these investments and obtain a stronger base to make better decisions. There is within the area of radiology in the region of Västra Götaland a pronounced need for a better flow of information regarding medical equipment and related service agreements.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

Denna rapport är skapad som syfte till att redovisa det erhållna resultatet av examensarbete vid Affärssystemprogrammet vid Kungliga Tekniska Högskolan (KTH). Arbetet har utförts som uppdrag för det serbiska företaget Soprex som är en underleverantör till ett svenskt företag. Rapporten är uppbyggd efter IMRAD metoden (Introduktion, Metod, Resultat och Diskussion).Uppdraget var att skapa en kravspecifikation för en modul som är en del av applikationen för hantering av olika kontrakt och prisberäkningar för Soprexs kunds olika kunder. Detta arbete fokuserad på kontrakt modulen. Arbetet har varit uppdelat i tre olika steg, syftet med detta har varit att successivt slussas in i företagets sätt att arbeta och lära känna deras standarder.