Sysmex XE-5000 är en automatiserad cellräknare som utför mätningar enligt olika mätprinciper, de två som tillämpats i projektet är RF/DC(Radio Frequency/Direct Current) samt Flödescytometri med halvledarlaser. RF/DC bygger på förändringar i radiofrekventa resistansen och likspänningsresistansen. Förändringar i den radiofrekventa resistansen (RF) ger information om densiteten i cellernas inre (exempelvis kärnans storlek) och förändringar i likspänningsresistensen (DC) ger information om blodcellernas storlek. Flödescytometri definierar ett mått på cellers fysiologiska och kemiska egenskaper. Detektion av cellerna sker genom att de bestrålas med en laserstråle samtidigt som de passerar en och en i instrumentet. Informationen som fås ut från flödescytometri inkluderar spritt ljus och fluorescens.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This study examines the background and nature of the credit default index swaption (CDIS) and presentsrelevant methods for modelling credit risk. A CDIS is a credit derivative contract that gives the buyerright to enter into a credit default index swap (CDS index) contract at a given point in time. ACDS index, in turn, is a multi-name credit default swap (CDS). Within the eld of research, thisthesis identi es the CDIS pricing models presented by Jackson (2005), Rutkowski & Armstrong (2009)and Morini & Brigo (2011) as the most recognized and developed. These models are evaluated byreconstruction in a numerical software environment.

Webbaserade informationssystem är idag en vanlig metod för företag att effektivisera sin verksamhet. Genom att använda sig av webbapplikationer så som web-services, kan resurser och data enkelt delas inom företaget på lokal och även global nivå över internet, genom att dessa resurser och data hämtas via web-servicen från centrala databaser. Examensarbetet utfördes hos Syntronic Software Innovations (SSI) i Gävle och det är utifrån deras specifikationer och krav som systemet har utvecklats. Denna uppsats redogör för hur ett sådant webbsystem kan utvecklas, samt vilka tekniker och verktyg som finns tillgängliga idag lämpar sig bäst för ändamålet. För att kunna svara på dessa frågor kommer forskningsmetoden design science att användas.

The Functional Resonance Accident Model is a method developed to analyze complex systems for the purpose of accident prevention. In FRAM-analysis a visualization of the complex system is created as an aid for identifying points of interaction in the system where the risk of accidents is high, and to determine where preventive measures are to be placed. FRAM Visualizer is a computer program developed as a tool for creating such visualizations.Many usability problems have been identified in FRAM visualizations created both manually according to established method and by using the FRAM Visualizer software. The purpose of this paper is to give a basis for how FRAM visualizations can be improved in accordance with usability criteria for use in future qualitative studies.The author suggests alterations to the FRAM visualization to resolve usability issues identified in previous articles and to achieve usability goals derived from visual communication theory. The design process is guided by established design principles.

I dagens samhälle ligger rådgivningstrenden i tiden och ett nytt begrepp har därmed skapats: ?edutainment? (education + entertainment), och nannyfenomenet är en produkt av detta. Nannyprogrammen handlar om professionella barnvakter ? så kallade nannys ? som lär ut tips och tricks till föräldrar som behöver hjälp med att strukturera upp familjen, införa rutiner, vinna tillbaka respekten och återta kontrollen. Syftet med denna undersökning har varit att med hjälp av fokusgruppsamtal ta reda på hur barn och vuxna uppfattar den mediepedagogiska framställning och uppfostringsmetoderna som förmedlas i nannyprogrammen Nannyjouren och Supernanny.

The most common types of smartphones in Sweden are iPhone and Android. Development in the IT feld is constantly changing and Windows Phone is a new operating system that has been introduced on the Swedish market in 2010. However, Windows Phone user interface is quite different from iPhone and Android.The numbers of applications for smartphones are increasing, and users are making greater demands on better  usability. Users want the application to be easy to understand and fast to bring into play.  If the application contains a bug or has other user problems, it can ruin the entire experience. If the user does not have a good experience of the application, the user will quickly stop using the application.Companies that do not have any mobile applications would probably begin with an iPhone application.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Performance of an intersection affects the total travel time in a traffic network. An intersection with good performance can easily be described by its contribution to lower travel time than in a comparable intersection. The travel time is of importance in the cost calculations when a specific intersection is to be chosen and designed. It is important to be able to make correct and precise performance calculations so that the cost calculations will not be incorrect. For that purpose the software Capcal, which is a traffic model for intersection analysis on performance, is used in Sweden.

The interest in small-scale electricity in Sweden has increased strongly in recent years. The interest is noticeable both among politicians to increase the share of renewables in the energy mix, and among electricity consumers to partially replace purchased electricity with self-produced. This has resulted in a significant increase of electricity production in low voltage grids in recent years, and the trend appears to continue in the coming years. The majority of the new production plants are solar cells, followed by wind turbines, and it is also in these the greatest efforts are made in this paper.Distributed generation is often seen as something positive since it will contribute to reduced transmission losses and reduced voltage drop in the networks, and that it increases the share of electricity from renewable sources. In cases where the grids are not strong enough, or in other ways not adapted to manage the installed production, power quality may be adversely affected.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

Titel: Kommunicera rätt! ? En studie om kommunikation mellan systemutvecklare med kundkontakt och kund. Författare: Peter Johansson Oskar Hanson Handledare: Johanna Törnquist Examinator: Guohua Bai Problemområde: Anledningen till detta examensarbete är att problem som kan uppstå vid systemutvecklingsprojekt vanligtvis har sin grund i kommunikationen mellan systemutvecklare med kundkontakt och dess kunder. Exempelvis hör en systemutvecklingsgrupp och ett bageri till två vitt skilda yrkesområden och därmed pratar de ?olika språk?, vidare kan det skapas semantiskt brus i kommunikationskanalen som i slutändan kan leda till en felaktig kravspecifikation och de verkliga förändringsbehoven förblir oupptäckta. Hypotes: Examensarbetet baseras på hypotesen: ?Semantiskt brus[1] i kommunikationskanalen[2], otillräcklig negativ feedback[3] från sändare[4] och mottagare[5] och svårighet att hitta rätt nivå på samtalet med hjälp av kodning[6] och avkodning[7] ger upphov till en felaktig bild av kundens verkliga förändringsbehov[8] .? Slutsats: Alla delar ur Shannons kommunikationsmodell tillsammans med cybernetikens negativa feedback påverkar resultatet vid framtagande av kravspecifikation. Delar som både teori och respondenter tar upp är att som konsult måste denne ?kunna tala kundens språk?, hitta rätt nivå på samtalet, ge och ta negativ feedback samt undvika semantiskt brus i kommunikationskanalen.

To increase the understanding of how individuals total life situation affects their stress level and health has lately more frequently been discussed in different contexts. Furthermore, it is important to have knowledge of power structures that exist under given circumstances in a society to get an increased understanding of how to structure the health promoting work to get the highest possible benefits. People?s work life is essential to their health, since we spend a lot of time at work. The aim of this study was to find out which factors that relate to nursing staff?s health and stress level from a general perspective.

Detta examensarbete reder ut arbetsprinciperna för olika typer av hårddiskskrivskydd; hårdvaruskrivskydd, mjukvaruskrivskydd, hybridskrivskydd och bygelskrivskydd. Slutsatsen av utredningen är att endast hårdvaruskrivskydd Detta examensarbete reder ut arbetsprinciperna för olika typer av hårddiskskrivskydd; hårdvaruskrivskydd, mjukvaruskrivskydd, hybridskrivskydd och bygelskrivskydd. Slutsatsen av utredningen är att endast hårdvaruskrivskydd bedöms ha tillräckligt pålitliga skyddsprinciper, vilket motiveras av dess oberoende från både hårdvara och operativsystem. Vidare undersöks hårdvaruskrivskyddet Image MASSter(TM) Drive Lock från Intelligent Computer Solutions (ICS). Några egentliga slutsatser gick inte dra av kretskonstruktionen, bortsett från att den är uppbyggd kring en FPGA (Xilinx Spartan-II, XC2S15) med tillhörande PROM (XC17S15APC).