On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

I detta arbete har den faktiska och simulerade energianvändningen på Spira förskola i Luleå undersökts. Den faktiska specifika normalårskorrigerade energianvändningen fastställdes till 121,4 kWh/kvm år. Vid projektering av förskolan uppskattades den specifika energianvändningen med hjälp av simuleringsprogrammet VIP-Energy till 78,5 kWh/m2 år. Därmed översteg den verkliga användningen den simulerade med 54,6 %.En parameterstudie av indata till simuleringsprogramet har också genomförts med avsikt att fastställa den totala förändringen i energianvändning då indata ändras. Följande parametrar har studerats;?Drifttid hos ventilationssystemet?Horisontvinkel?Inomhustemperatur?Klimatzonen?Kvot mellan till- och frånluft?Luftomsättning för ventilationssystemet?Solreflektion från omgivande mark?Temperaturverkningsgrad?Vindhastighet?Vridning av byggnadenNyckeltal som kan användas för att snabbt uppskatta påverkan på den totala energianvändningen har också sammanställts för majoriteten av de studerade parametrarna.

Electricity production from renewable energy resources such as wind energy and photovoltaics is variable. Integration of these intermittent resources into the electricity system leads to new challenges in how to manage imbalance between supply and demand on the grid.One way to meet these challenges is to develop so-called smart grid solutions. One idea, called demand response, is to adjust the amount or timing of energy consumption, e.g. by control of household appliances, to provide flexibility that could be used to balance the grid. In aggregate, when applied to many units across the system, large volumes of energy could be made available when needed and this grid flexibility can be used as a product on the electricity regulation market.Despite the potential benefits, the number of demand response bids is currently low.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Fungi are everywhere around us and recently, there has been an increased interest in their role and importance in the forest. The fungi have several strategies to acquire energy and nutrition; one example is a mutual symbiosis with trees and plants - another being dissolving organic materials. Attempts have been made to better understand the circulation of nutrition in coniferous forests, and how fungi cooperate. Trees and plants have adapted with mycorrhizae and are now interdependent which is important to consider in forestry. A great number of fungi depend on dead wood and old trees to set fruiting bodies and spread further. These fungi also create environments for other species, such as birds and insects. The vegetation of a forest is determined by a series of factors; tree species, how old the forest is, soil type, as well as the ability of the fungal spores to spread and establish. Furthermore, in determining vegetation, the fungi?s ability to compete in the soil matters. These factors are nearly unexplored. Researching fungi knowledge and interest, a survey was distributed to five groups of people. The groups included forest owners, high school teachers, high school students, senior citizens, and a fifth group - ?o he ? - consisting of people of mixed ages and backgrounds.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

Wireless communication is becoming more common, a relatively new technology within the area is Bluetooth Low Energy. It?s been developed to be energy efficient and in regard to compatibility. Alongside the growth of wireless technology, scientists and companies are looking for new areas of use. One of these is localization, which means to determine the position of a moving device with the use of stationary devices, an example of this would be GPS.This report means to evaluate indoor localization using Bluetooth Low Energy and was made for Combitech AB in Jönköping.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.