The need for a more efficient electrical grid has made the smart grid concept popular in recent years. The aims of this study are to identify the conditions in Sweden for implementing a smart grid and to analyse the opinions of stakeholders. One finding is that the large capacity of Sweden?s existing electrical grid decreases the immediate need for smart grid solutions. However, the rapid increase in wind power might push the development of a smart grid in the coming years.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Global warming is a huge issue that humans have contributed to through over-exploitation of natural resources and extensive usage of fossil fuels. Now more than ever, we need to embrace a recycle thinking and reuse our waste, for example through producing biogas from our food waste. The purpose of this report was therefore to identify the energy usage and emissions resulting from the biogas chain which spans from Solna Stad to Uppsala Vatten. Furthermore, potential efficiency improvements were to be identified and proposed. This report focused mainly on the first part of the biogas chain that includes the collection of the food waste and the reloading process.

This security study attempts to explain the dynamics of international conflict management of an intrastate conflict, through a combination of three theoretical frameworks. The conflict in Syria is shown to be managed mainly through strategies using coercive diplomacy, and some main contributions within the research field relating to strategies of coercion are used for guidance, to important factors which could affect coercive international conflict management, as well as to additional theories which could enhance the study?s explanatory power through a combined theoretical framework. The two added theoretical frameworks are Power Balancing and a Multidimensional concept of Power. With the aid of analytical tools derived from this combined framework the conflict management is analysed within both a multilateral and unilateral setting, offering some explanation as to why international conflict management (practiced by UNSC multilaterally and USA unilaterally) has shown so little progress in regard to the conflict, as well as why one significant, though limited, result could be achieved regarding the destruction of the Syrian regime?s chemical weapons arsenal..

Abstract Road cycling is well established and has always been described as a highly endurance sport. To be able to compete in such a demanding sport the physiology of the athletes needs to be greatly developed. This review will focus on high intensity interval training and its impact on the physiological characteristics of competitive road cyclists. The main difference between different levels of competitive road cyclists seems to be the capacity to maintain a high sub maximal power output over a long period of time in order to succeed. High intensity interval training, from 30 seconds to 5 minutes, leads to improved VO2peak, aerobic peak power and time trial performance.

The climate changes that are occuring in the world have resulted in that the EU callingfor a 20 % reduction in energy consumption to the year 2020, to reach that goal theEU want the public sector to go forth as a good example. Västfastigheter owns andmanage the hospital buildings in the Västra Götaland region. To be able to reducetheir energy usage Västfastigheter has hired several consulting firms to chart out theenergy consumption on each hospital building. The biggest energy savings potentialhave been calculated and what the cost will be to perform each action. The energyaudit have been completed and stand as the decision basis for Västfastigheter?s choiceon which action packages that should be implemented.

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The purpose of this paper is to contribute to a deeper understanding about the acceptance of wind power. Our basic assumption is that local conditions are important and can explain how the acceptance of change at different stages of establishment. The main purpose is to see if there are differences in the acceptance of wind power in different stages, and examine the factors that influence acceptance. That includes how people in three different areas of study estimates that they value their environment and how it is affected by wind turbines. The project was conducted interdisciplinary geo-targeted and consists of three parts.

I ett modernt samhälle är elektricitet en nyckelkomponent för industrins, individens och samhällets utveckling. Naturkatastrofområden där elektriciteten slagits ut står inför stora prövningar för att kunna få samhällsviktiga funktioner att fungera igen. Med hjälp av den mobila miljövänlig energienhet Emergency Energy Module (EEM) kan elbehovet lindras.Detta examensarbetes mål var att ta fram en elsystemsbeskrivning för den kommande Export container (EXC), samt ta fram ett korrekt elschema för den befintliga EEM.Elsystemsbeskrivningen måste ta hänsyn till EXC:s kravspecifikation samt innehålla Bills of Material (BoM) och elschema. Problematiken ligger bl.a. i att få flera olika energikällor (sol, vind och biomassa förgasare) att fungera tillsammans i ett elsystem där likspänning, växelspänning, trefas och enfas blandas.