In the latest edition of NRC (2007) the feeding recommendations for Ca and P to growing horses were increased with 35 and 25 %, respectively, based on results from a Canadian study showing that daily endogenous fecal losses of Ca and P were greater than previously suggested. A Ca absorption efficiency of 50 % is used for all horses. However, the true absorption efficiency might be as high as 70 % in young horses. P absorption efficiency is assumed to be higher for growing horses because their diets are often supplemented with inorganic P. Thus, an efficiency of 45 % is used for growing horses as compared to 35 % for mature horses.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionTitle: The effect of the glycemic index of breakfasts in energy intake inchildren and adolescentsAuthor: Charlotte Olofsson, Cornelia Johansson and Maria NordbeckSupervisor: Fredrik BertzExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 16, 2013Background: The glycemic index (GI) and it´s effect on energy intake is a debated subject.Research has been done whether food with lower GI decreases hunger and lowers energyintake, which could be an effective tool to prevent overweight in children and adolescents.Breakfast eating is successful for maintaining a healthy weight and it´s therefore interesting tosee if the quality of the carbohydrates matters.Objective: To evaluate the scientific evidence regarding the effect of GI of breakfasts inchildren?s and adolescents energy intake.Search strategy: To find relevant articles, a systematic literature search was made in thedatabases PubMed, Scopus and Cochrane. Search terms that were used were: breakfast,breakfast quality, children, glycemic index, energy intake, obesity.Selection criteria: Randomized controlled trials and cohort trials, breakfast eatingindividuals, children and adolescents under 18 years old, reported glycemic index. Outcomemeasurements: Energy intake.Data collection and analysis: Six original articles met the inclusion criteria and werereviewed by the SBU audit template for randomized and controlled studies. There after onearticle was excluded because of very low quality of the study.

As energy prices skyrocket and the environmental issues become more frequently debated, interest in energy-efficient buildings has increased sharply in the past decade. Because of this, the interest to achieve high air tightness in building envelopes have once again awakened, due to a good air tightness contributes to lower energy consumption in several ways and to a healthier indoor environment.As the regulations for energy consumption and controls of achieved air tightness has tightened considerably in recent years, the work regarding sheets for air tightness changed significantly for construction contractors. This thesis includes a study that aims to detect what kind of manuals, recommendations or instructions contractors working according, and how a number of randomly selected construction companies in Halland, Sweden, are dealing with the matter of high air tightness of the building envelopes. The study also includes a knowledge inventory of supervisors, site managers and skilled workers, and what their opinions and attitudes are like towards work regarding the sheets of air tightness. The results have been compared with a similar survey dated to 2004, conducted by the SP Technical Research Institute of Sweden in collaboration with Chalmers University of Technology.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

The idea of bringing mindfulness into organizations has become increasingly popular. While previous research has shown positive effects of mindfulness practice in individuals, consequences of introducing mindfulness in organizations remain largely unexplored. This thesis examines those consequences through a qualitative study. We conducted semi-structured interviews with members of two case companies. Based on the effects which mindfulness has been shown to have on individuals, our analysis was especially focused on the areas of efficiency, effectiveness and organizational culture.

I detta arbete har den faktiska och simulerade energianvändningen på Spira förskola i Luleå undersökts. Den faktiska specifika normalårskorrigerade energianvändningen fastställdes till 121,4 kWh/kvm år. Vid projektering av förskolan uppskattades den specifika energianvändningen med hjälp av simuleringsprogrammet VIP-Energy till 78,5 kWh/m2 år. Därmed översteg den verkliga användningen den simulerade med 54,6 %.En parameterstudie av indata till simuleringsprogramet har också genomförts med avsikt att fastställa den totala förändringen i energianvändning då indata ändras. Följande parametrar har studerats;?Drifttid hos ventilationssystemet?Horisontvinkel?Inomhustemperatur?Klimatzonen?Kvot mellan till- och frånluft?Luftomsättning för ventilationssystemet?Solreflektion från omgivande mark?Temperaturverkningsgrad?Vindhastighet?Vridning av byggnadenNyckeltal som kan användas för att snabbt uppskatta påverkan på den totala energianvändningen har också sammanställts för majoriteten av de studerade parametrarna.

Electricity production from renewable energy resources such as wind energy and photovoltaics is variable. Integration of these intermittent resources into the electricity system leads to new challenges in how to manage imbalance between supply and demand on the grid.One way to meet these challenges is to develop so-called smart grid solutions. One idea, called demand response, is to adjust the amount or timing of energy consumption, e.g. by control of household appliances, to provide flexibility that could be used to balance the grid. In aggregate, when applied to many units across the system, large volumes of energy could be made available when needed and this grid flexibility can be used as a product on the electricity regulation market.Despite the potential benefits, the number of demand response bids is currently low.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

The coproduct, dried distillers grains + solubles (DDGS) from ethanol production based on wheat contains much rumen degradable protein and fiber with low digestibility. To compliment this quality in an effective way a grass silage low in protein and much digestible fiber is needed. The aim of the study was to investigate the effects of adjusting the crude-protein concentration and fiber quality of the silage when feeding DDGS and of varying the inclusion level of DDGS, when feeding the adjusted grass silage, on intake, milk yield and composition, faecal traits and feed efficiency. Four different total mixed rations were compared. The normal grass-clover silage had a crude protein content of 17,8 % and an NDF content of 46,2 % of dry matter. The adapted grass silage had a crude protein content of 14,6 % and an NDF content of 52,9 % of dry matter. The diets were formulated to have similar nutritional content except for A + 4 which had a higher content of rumen degradable crude protein and a lower concentration of NDF.

The subject of this study is the ?work strategy? (arbetslinjen); the idea that work and active measures are preferred over cash benefits. The aim of the study is to investigate why the work strategy, which has been almost undisputed for nearly a century, has had widely changing contents over the years, what measures have been taken and which groups have been included. It also attempts to find out whether there is a correlation between unemployment rates, society and the different aspects of the work strategy. The study is conducted as an idea analysis, mainly of dissertations on the work strategy and public inquiries, and covers five time periods from the 1920?s until today.

Since the late 50th century, the automobile has been normative in the Swedish society (Lundin 2008). This has led to an urban environment deeply characterized by the motor vehicle and its necessities, while other means of transportation, such as train and bicycle, have been ignored and put aside. However, over the past decades, a new trend has been seen in urban planning as a consequence of the increasing knowledge of the negative qualities caused by the car. As a result, the bicycle is seen as a conceivable transport mode.This thesis examines cycling on four issues:- Why is there a need of more cyclists? - How can the total number of cyclists as well as the number of satisfied cyclists increase? - Which factors affect the choice of transport mode? - Which factors affect the choice of route?The first two questions are discussed from a literature study that was conducted at the beginning of the thesis.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

Wireless communication is becoming more common, a relatively new technology within the area is Bluetooth Low Energy. It?s been developed to be energy efficient and in regard to compatibility. Alongside the growth of wireless technology, scientists and companies are looking for new areas of use. One of these is localization, which means to determine the position of a moving device with the use of stationary devices, an example of this would be GPS.This report means to evaluate indoor localization using Bluetooth Low Energy and was made for Combitech AB in Jönköping.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.