Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Stands where pre commercial thinning has been ignored or inadequate often tend to have high stem density and low average diameter when they reach heights of thinning. In such stands, it can often be expensive to do a conventional pulpwood harvest as a first thinning. This study investigates the development of the stands and the economic outcome of forest fuel extraction, or a combined harvest as alternatives to the ordinary pulpwood harvest. Simulations in Heureka StandWise were performed for two thin and dense stands, which were constructed by data from the Swedish National Forest Inventory. The simulations show that the extraction of forest fuel in first thinning at an early stage can provide higher net revenue compared to conventional pulpwood harvest at the same time or later.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

The Republic of Moldova, situated in eastern Europe and a former part of the Soviet Union, is now experiencing a phase of transition in both society and landscape. They have hardly any fossil depots and are currently dependent on Russian gas, with 97% of their energy needs imported. The new elected government wants to move towards the EU and this is generally seen as the way to grow and reduce poverty. Security in the energy sector is important and one tool is to increase the use of renewable energy sources. Through interviews, texts, and visits I have studied the implementation of renewable energies (RE) in Moldova through a society development perspective. The study has aimed to investigate the sociotechnical complexity of this subject and to discuss the potentials and way of dealing with the subject in the specific cultural context of Moldova.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

In connection with the property crises in many countries, caused by the financial crises, people are now more aware of the risks involved in poor property-investments. The unusually cold winters along with extreme prices of electricity in Sweden in recent years has also contributed to increased interest in energy-efficient buildings.The process of developing a modern family home in Kiruna, Sweden is presented the first part of this paper. The house has been designed to withstand very high stresses from snow, low energy consumption as well as a high standard of living comfort. Aspects of the house covered here involves everything from construction, heating and ventilation to sanitation. Each of these areas is presented based on their underlying, scientific methods or theories.

The heating of companies premises is today functional with electrical heating and heating offossil fuel. The energy cost for these kinds of heating in buildings has heavily increased duringthe last years and the influence on the environment has become more visual. This leads to thatenterprises today become more anxious to render energy more effective and find alternativesolutions to their ancient heating systems. This is something that Skandinaviska kraftprodukterAB in Halmstad has become aware of.The purpose with this examination is to find the most cost-efficient and environmental measuresfor the office and workshop premises of SKP AB. Where one of the bigger things is to find agood alternative for their current oil furnace, which was heating the workshop.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

In this report a study is carried out with the aim to identify added values of EPC projects implemented in schools in order to increase the interest of EPC projects on the market. The report examines how the planned maintenance, supervision, maintenance and corrective maintenance is affected, how insurance premiums and terms are affected, the indoor environment and how the tasks of the operating staff is changing. A literature study of energy savings, energy use in schools, maintenance and insurance as well as how energy efficiency improvements are related to the Swedish environmental objectives has been made. Visits were carried out in Ludvika, interviews were also carried out with operation technicians and local strategists in Ludvika as well as employees of insurance companies.Schools often have neglected maintenance and problems with ventilation and indoor environment. Schools also have a large energy saving potential due to their low utilization, mainly because they are empty parts of the year.