Denna studie syftar till att uppmärksamma uppfattningar om klimatförändringarna utifrån fem informanters perspektiv och med kopplingar till relevant litteratur inom klimatområdet. Viktiga aspekter av klimatförändringar som diskuteras är informanternas syn på människans inverkan på klimatet, fördelningen av ansvar och viljan till förändringar och uppoffringar..

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

For Skattkärr IF a turf field with warming has been projected to increase field?s utilization hours and to have a longer period for athletes to perform their activities outdoors. The technique chosen to heat the plan is a type of a geothermal heating system without a heat pump. The brine, which is water with 30% ethanol, collects heat from the borehole and discharges it to a coil in the field. There is at position 11 boreholes but it is planned to increase the number to 31, which is the design for the facility.

De allra flesta som tränar hästar gör det för att i något syfte öka hästens prestationsförmåga. När hästen är rätt tränad för sin uppgift minskar skaderisken hos både häst och ryttare. Rätt träning främjar hållbarheten på lång sikt. Med en pulsmätare anpassad för användning på häst är det möjligt att utläsa vilken intensitet träningen har och anpassa den för att få den effekt man önskar. Med konditionstest för häst kan man sedan utvärdera om träningen haft avsedd effekt. En enkel mobilapplikation anpassad för konditionsträning av ridhäst skulle kunna leda till en ökad medvetenhet kring träning och träningsintensitet hos människor som tränar ridhästar.

The thesis focuses on the measurement of situational factors affecting brand loyalty in purchases and consumption. A survey is conducted using previously developed scales and 199 respondents. Results show that for the particular product category (ready-to-drink recovery drinks), purchase frequency and the product experience have stronger effects on loyalty than do situational factors such as type of activity and perceived stress. Implications for managers are discussed and suggestions for further research is presented..

This investigation indicates that there are regions within Europe that seems to have similar preferences and priorities regarding pike angling travels to Sweden. Swedish pike angling facilities process in first hand markets with favourable economic circumstances and a cultural interest for pike angling. There was a big differences in features between the Northern, Western, Eastern and Southern regions of Europe. They also seems to be tied to specific regions within some of the nations.The regions have diverse requirements and distinguish in terms of consumption and preferences regarding different aspects of pike angling. From there it is possible to divide pike angling tourists into segments.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

This Master?s Thesis aims to illustrate in what ways the two Swedish environmental assessment tools, the Environmental Load Profile and EcoEffect differ and if performed valuations gives different results and environmental goals.The built urban environment causes about half the environmental loading in Sweden. The society?s ambition towards sustainable development has resulted in demands reducing the environmental load. One way to accomplish this change is with the assistance of tools for environmental assessment of the built environment.

The empirical data used for this master thesis, consists of eight manuals with the main purpose to help students evaluate information resources found on the web or Internet. The purpose is to elucidate the discourses and investigate those textual characteristics, which figure in the investigated manuals. The method used is a discursive and linguistic approach, with a power/knowledge discussion applied to the results. The analysis identifies, among other things, the production and consumption of the investigated texts, and that the manuals function as a reflection of the relationship between the participants in the situation, the sociocultural practice of the institution and its identity..

Huvudmålet med examensarbetet var att konstruera en utrustning för mätning samt loggning av dieselförbrukning på en buss. Det fanns dessutom en önskan att ett MOST-nätverk skulle konstrueras. Detta skulle användas på 2005 år Formula SAE-bil vid Luleå tekniska Universitet. Olika metoder diskuterades och arbetet resulterade i en prototyp som mäter och loggar både bränsleförbrukning och körsträcka på Luleå Lokaltrafiks bussar. Även ett mindre MOST-nätverk upprättades men med ett icke tillfredställande resultat.

Huvudmålet med examensarbetet var att konstruera en utrustning för mätning samt loggning av dieselförbrukning på en buss. Det fanns dessutom en önskan att ett MOST-nätverk skulle konstrueras. Detta skulle användas på 2005 år Formula SAE-bil vid Luleå tekniska Universitet. Olika metoder diskuterades och arbetet resulterade i en prototyp som mäter och loggar både bränsleförbrukning och körsträcka på Luleå Lokaltrafiks bussar. Även ett mindre MOST-nätverk upprättades men med ett icke tillfredställande resultat..