The aim of the study was to compare productivity in first thinning of birch stands, when either energy- or pulpwood was harvested. The systems total profitability was also compared by including forwarding and chipping costs. A Gremo 950 HPVR harvester was used and the same driver was used under the entire study. During the pulpwood harvest a Logmax 4000b harvester head was used and a feller buncher head made by Silvatec was used during the energy wood harvest. Six study unit pairs were located in a birch dominated stand outside Ängelholm in Skåne.

The last decades the increased computerisation at the places of work has led to new physical loads in the working life and new demands on the working environment. The widespread usage of computers in the working life has led to more sedentary work and less daily movement.The purpose of the thesis is to develop a new product to a concept that in a low intensive and healthy promotional way will activate the body. The product will make a combination of healthy promotion activity and work during office hours possible and primary aims to those with a sedentary office work, which leads to that the body don´t get to be activated in the extent needed.Information has been gathered from studies already made in this area, interviews plus a study and an experiment. From the gathered information concepts and functional solutions has been generated and evaluated to result in a product concept.The thesis has resulted in a concept that consists of a work place unit where the user walks on a treadmill and works at the same time.A general conclusion which can be drawn is that the majority of persons that tested to walk and simultaneously work with a computor on the treadmill found this way of working attractive. Many were positively surprised and said that they would use such an physically activating work place implement if it was available at their place of work..

The Public Sector Scorecard (PSS) is a younger version of the balanced scorecard, created for public and nonprofit organizations. The latest model of PSS is divided into three main groups and seven perspectives, while the balanced scorecard consists of four perspectives. Organizations who use either PSS or the balanced scorecard are supposed to have a clear vision spread all over the unit. This study has sought differences between the two models of financial control in both theory and practice. The first part of the study is a theoretical comparison between the models? structures and terms used in them.

Denna studie har haft som syfte att synliggöra i vilka situationer förskolepedagoger och barn på en förskolas småbarnsavdelning använder sig av surfplattor. Faktorer som undersökts har varit vilka kontexter som utgör dessa situationer, vilka beståndsdelar dessa kontexter består av samt vilka motiv och aktiviteter som ligger till grund för användning av surfplattor. Studien har varit av kvalitativ karaktär och har undersökt en småbarnsavdelning med barn upp till tre år på en förskola i Stockholm. För att åstadkomma detta har semi-deltagande observationer skett på förskolan under fyra dagar. Den insamlade datan har ställts mot och analyserats efter Nardi, Dourish och Benyons teorier om kontext samt Blomberg, Burrell & Guests teori om etnografi.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

The dry out criterion (MCPR) has been calculated for the most limiting H2-events for Forsmarks unit 2 and 3, at operating points that are normally not analyzed before each cycle. The operating points that normally are regarded as the ones with the lowest margin to dry out are the ones where the thermal power is the highest at agiven recirculation flow. This report shows that this is not the case for Forsmark 3. MCPR-values at partial power operating points are higher for the limiting case inside rather than on the boundary of the region of operation. It is therefore recommended that the method for determining the dry out criterion for Forsmark 3 is revised to account for this effect.

The aim of this study was to examine how the new established phenomenon of ?Internet drugs? causes challenges to organizations, both individually and in relation to collaboration. The study is based on qualitative semi-structured interviews with representatives from three organizations - one youth police unit, one medical addiction centre and four units working within social services. The theoretical approach that was used is theory about human service organizations, theory about collaboration and new institutional organizational theory. A conclusion is that the current drug classification is problematic and mainly challenging for the organizations that focus on prevention work and early interventions.

Working life is an arena that often reflects attitudes that already exist in our society. When alcohol- and drug abuse is detected among employees the employer has a statutory responsibility for rehabilitation. But the way how these employees gets to be treated is also influenced by attitudes. The purpose of this essay was to illustrate from a gender perspective how women's and men's alcohol- and drug abuse occur in working life and how the attitudes in our society towards their abuse reflect on trade life. Referring that, our intention was also to examine which consequences are given of how the individual is treated.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

When we started this study we quickly saw that almost all the previous research that we find was focused and concentrated on the fact that the employees should be motivated. The research also presents a top-down perspective which means from the head to the employee. A Swedish newspaper wrote in an article that 1/3 of all Swedish heads can?t motivate their employers. A Swedish internet platform discusses this and says that heads need to be motivated to be able to motivate people around himself.

The purpose of this study is to investigate how teachers work with Autism pupils in two different schoolforms: a traditional elementary school and a language school. The study was based on three questions: 1. How do teachers in elementary school prepare, plan and implement reading and writing instruction to Autism pupils? 2. How do teachers in the language unit prepare, plan and implement their reading and writing instruction to Autism pupils? 3.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

Alstom Power Sweden AB in Norrköping isexpanding their business in the presentsituation and has implemented aprocedure for reverse engineering as apart of this work. Reverse engineeringat Alstom is an extensive procedurethat is calculated to be performedunder very time demanding conditions.This thesis is a continued exertion ofthe implementation process in order toidentify and describe the mostimportant process steps in purpose to beable to manage and improve theprocess.This thesis was written with twoprimary objectives. The first was todescribe and map out the procedure torecreate technical data of a turbineblade, based on a validation of thereverse engineering process that hasbeen performed at Alstom in Norrköping.The second purpose was to describe thekey factors to achieve successful usageof reverse engineering that have beennoticed in the literature study.The work is based on a literature studyon the subject reverse engineeringwhich produced the theoreticalknowledge of the method to reproducetechnical data to a product. Theliterature study has also led to adescription of reverse engineering froma legal perspective to clarify how farit is allowed to apply the methodaccording to the patent laws. With theliterature study as support and furtherhelp and guidance from individualswithin the reverse engineering unit atAlstom, a complete picture andunderstanding of the process has beenproduced and documented..

This essay concerns PR-consultants and their view on their work. The purpose was to find out which type of communication they use in contact with the target. By target, we mean the group of people the employer wants to reach with help of the PR-consultant. For example: Jägarförbundet wants to get help from a PR-consultant to influence someone in the government so that Swedish hunters can shoot more wolves, than the target group is the one in the government. We also wanted to find out if the PR-consultants are aware of the image the public have of them and if they are trying to change it into a more positive one, by using more ethics, openness and to have more focus on the relations aspect.  PR in the future with new social media (like Internet) was also a subject, where we wanted to know how much they involve social media in their work.  Our main questions were:How do PR-consultants relate to openness in communication, ethics and social media?Which one of Grunig?s PR-models is most occuring in the PR-consultants work? We made a qualitative study where we carried out interviews with six PR-consultants.