In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

Vår uppgift var att praktiskt genomföra och utvärdera två kalibreringsmetoder för modväxlande kammare hos Saab Avionics AB i Linköping. En metod som Saab Avionics använder och en metod enligt europeisk civil flygstandard, EUROCAE ED- 14D kapitel 20.6. Uppgiften löstes genom att utföra mätningar enligt de två kalibreringsmetoderna och därefter analysera mätdata i MatLab. Vi hann med att göra Saab Avionics kalibreringsmetod i samtliga mätpunkter som krävdes för utvärderingen, men bara drygt halva kalibreringen enligt europeisk civil flygstandard. Utifrån de mätningar vi gjort kan vi dra följande slutsatser: Båda kalibreringsmetoderna säger att Saab Avionics modväxlande kammare uppfyller respektive krav när den är olastad.

The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator.

This report is the result of a thesis work done at the Department of Engineering Sciences, Uppsala University, and includes 15 ECTS points. The work has been performed at Företag A, a company specializing in Electronics whose major product has become a sophisticated tool used by authorities across northern Europe. Företag A has initiated a quality management system according to the criteria set by ISO 9001. Following demands from customers, Company A has now decided to also start working towards a certification according to SS-EN ISO 9001:2008, this work is the foundation for the thesis work. The thesis work has been limited to the production process and the aim has been to enable this process to be certified according to ISO 9001:2008. The work has been performed by analyzing the existing quality management system and the requirements for each process included, whereby the gap between the current and the target state has been mapped. Suggestions have then been made on how this gap can be filled, some of these suggestions have also been carried out during the thesis work. The conclusions drawn are that quality management does not have to be complicated, but quickly becomes so when the complexity of the processes increases.

Master thesis work at ITN (Department of Science and Technology) in the areas of A/D-construction and RF-circuit design. Major goal of project were to research suitable possibilities for implementations of direct conversion in transceivers operating in the 160MHz band, theoretic study followed by development of components in the construction environment Cadence. Suitable A/D- converter and other important parts were selected at the end of the theoretic study. Subsampling technique was applied to make A/D sample requirements more realistic to achieve. Besides lowering requirements on A/D-converter it allows a more simple construction, which saves more components than subsampling adds.

At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

People are usually directed towards each other in conversations, to make it easier to hear what is being said. Algorithms for voice and speech recognition works in a similar way, regarding the microphone direction towards the sound source. In this thesis in Electronics has therefore a servo control with binaural sound localization been implemented on a microcontroller connected to two microphones.When people perceive sound, the brain can estimate the sound source direction by comparing the time taken by the sound reaching one ear to the other [1]. The difference in time is called the interaural time difference, and can be calculated using various techniques. An exploratory comparison between the techniques cross-correlation and cross-spectrum analysis was carried out before implementation.

It has become increasingly important for businesses today to create a strong customer loyalty tie between their brand and their customers. In most markets today a lot of companies fight for market share and loyal customers. The increased uses of Internet and Internet commerce have made it possible for companies to create relationships with their customers through their websites. The Internet has also opened up new ways for customers to quickly and easily price compare products on price comparison websites. This means that customers have become more price conscious which has lead firms to fall into a price war with the competitors. The purpose of this paper is to examine brand loyalty in the consumer Electronics market and go into detail on how web shop role affects the creation of loyalty to companies that are either a shop or do not have an online store. To examine this, a survey was made online and an interview was made with the President on Salesoogle Niklas Rasmusson. The questions and the interview of the questionnaire focused on confidence in online commerce and physical stores.

This report is introduced with a presentation of fundamental electromagnetic theories, which have helped a lot in the achievement of methods for calculation and design of microstrip transmission lines and circulators. The used software for the work is also based on these theories. General considerations when designing microstrip solutions, such as different types of transmission lines and circulators, are then presented. Especially the design steps for microstrip lines, which have been used in this project, are described. Discontinuities, like bends of microstrip lines, are treated and simulated.

E-handel mellan företag som säljer hemelektronik och svenska konsumenter har blivit vanligare de senaste åren. Trots den kraftiga tillväxten är konsumenter fortfarande ifrågasättande till tryggheten med att handla över Internet. Med hjälp av teori har aspekter identifierats som påverkar konsumentens förtroende till en webbutik. Aspekterna delas in i fyra kategorier; influensbaserade faktorer, upplevelsebaserade faktorer, personlig inställning och erfarenhetsbaserad inställning. Med en kvantitativ studie har vi undersökt vilka faktorer som är viktiga för att konsumenten ska känna förtroende till en webbutik när den handlar hemelektronik.

NMD 100 is a notes and media dispensing machine, manufactured by De La Rue Ltd, located in Flen, Sweden. The customers, mainly bank offices, have expressed a need for a more comprehensive description of errors occurring from time to time in their machines. In order to acquire a BSc-degree in Computer and Electronics Technology at the University of Linköping I have carried out a diploma work, regarding new computer programs to fulfil the customers? wishes. The machine NMD 100 is connected to its PC through handshaking.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, Electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

This study examinates technology's traumatic impact on the male subject in The Atrocity Exhibition by J.G. Ballard. In my analysis I show how the protagonist uses a fetischistic strategy in order to make sense of the trauma that technology embeds. Paradoxically it proves to be the agent of his trauma, but also functions as his shield. The machine is thus in a position of the hinge, the point in a structural system that both enables and deconstruct the system.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Sammanfattning: SAAB Communication i Linköping sysslar med konsultverksamhet mot ett flertal nationella och internationella företag inom både den civila och militära sektorn. Fokus ligger på flyget med uppdrag inom telesystem, radiosystem, signaturanpassning, EMC, atmosfärisk påverkan mm. I det sistnämnda ingår även kosmisk strålnings inverkan på elektronik. Den fortsatta miniatyriseringen av elektronik, speciellt minneselektronik leder till ökad känslighet mot den kosmiska partikelstrålningen som ständigt regnar ner på jorden, därför är det extra noga att minnen testas innan de sätts i bruk vid flygburna system. Syftet med detta examensarbete är att konstruera en provplattform som registrerar fel som uppkommer i ett DDR2 SDRAM minne vid påverkan av den ovannämnda strålningen.