The purpose of this degree project is to study if there is a intentional work with technology in the elementary school, preschool to fifth grade, in a municipality. The work will also study what conditions there are in the schools in order to work with technology. 95 questionnaires were distributed to the responsible teachers in all primary schools in the municipality, from preschool to fifth grade. The results of the survey show that more than half of the respondents do not consider themselves to work with technology in the school. The conditions, in order to work with the school subject technology in the municipality, are primarily external such as: material, facilities and the ability to divide students into smaller groups.

The purpose of this report is to explore how modern technology can work againstolder craft techniques. The focus of the research will depend on what conditions areoptimal for cutting marquetry with laser technology. In my work I account for thehistorical background of the various techniques and then through own practical testsexamine whether the laser technology can complement the traditional techniques..

Purpose: The purpose of this thesis is to analyse the process of technology sourcing within firms active in the CRT-market. The primary focus of the study is the motives, risks and problems associated with technology sourcing, to construct key learnings for organisations consider undertaking this way to access research and development or those organisations that are already operating in the CRTmarket. Method: As method has abduction been used. The empiric material of the thesis is based on qualitative research in form of interviews in a conversational manner. For correct interpretation and understanding a hermeneutics approach has been used.

This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test drive of the systems and the assignment wasapproved..

This paper aims to study the possibilities and challenges the car industry has to face with applying information technology in cars. The goal is to describe and analyse all the existing technology in the cars out on the market today as well as future possible technologies in cars. By interviewing people who has been working or are working with information technology in cars, we aim to clarify the obstacles and opportunities in the process of implementing informatics in cars. With this knowledge we want to learn more about Ubiquitous computing and how humans interact with Ubiquitous computers today and will be interacting in the future. Technology has a rapid development pace and we find it interesting to examine how the car industry can keep up with the rapid development pace of technology. .

The use of digital technology in preschool has been a question aboutif it will be used. By the new curriculum for preschool, it now is a question about how it will be used. My experience shows that many pedagogues are still afraid that the children will miss the interaction whit other children when they are using digital technology.The aim of the study is to see if it is social for the children to use digital technology in preschool.This study is made by inquiry, qualitative interviews and observations.My result shows that children are social active with each other while using digital technology. Turn taking and time determines who will play and what the conditions are. The thesis concludes that children perform social interaction when using digital technology.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

The effects from a planned wind farm on the grid utility Gävle Energis electrical grid have been studied. The wind farm is planned to be built in the forest 15 km north of Gävle and will have 23 turbines with rated power from 2 to 2.5 MW, resulting in a total installed power between 46 MW and 57.5 MW. The grid connection will be made at 70 kV. The aim of the analysis was to determine what effects the wind farm would have on the power grid in the form of electrical disturbances (flicker etc.), need for new investment and raised operational cost. To allow the connection of the wind farm technical solutions (new lines, power stations and grid reinforcements) have been constructed.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

This is an essay concerning the differences between boys? and girls? way of learning and how this difference influences the teaching in the technology subject. The method is divided in two. The first part is based on a survey over literature about teaching girls and boys in the technology subject. The second part is based on interviews with three male teachers in the same subject.

This report is a specialization in Software defined networking. SDN really comes to revolutionize the industry and it?s under constant development. But is the technology ready to be launched into operation yet? The report would initially involve a number of problems that today's network technology is facing.

This thesis examines history of the subject of mechatronics and innovation. The main reason tostudy mechatronics from a historical point of view is that it has never been done to a greater extent before. An overview is justified because various definitions have been used over the decades, but nowadays the subject has become more established. Focus in this thesis is mainly on development of the subject of mechatronics at Royal Institute of Technology in Stockholm. Innovation is the other aspect of this thesis.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

This essay takes its starting point in the research on digital technology and theories on learning to apply the research on history teaching. The theories on learning from Illeris and Selander are used to find out how the digital technology should be used in upper secondary school, since there is no extensive research on how the new technology should be used in upper secondary school. From that point the essay?s primary goal is to investigate how teachers use digital technology, if they choose a particular study field while working with the technology. Furthermore it investigates whether or not the technology is an appropriate mode of operation when developing abilities such as historical consciousness and historical empathy.

This study deals with integration between core subjects and character subjects on the upper secondary schools Electrical Engineering Programme. The purpose is to investigate how four teachers define subject integration, which the advantages and disadvantages are according to them and what the purpose is whit integrate the core subjects and the character subjects.The finding in this study highlighted that between themselves the teachers had different definitions of subject integration. In order to start up with a integrated working model the teachers had to come up whit a mutual definition of subject integration..