Traffic accidents where wild animals are involved represents between 60 and 80 percent of all reported accidents, depending on location in Sweden. In a country like Sweden, with a lot of forest, there is always risk of a collision with a wild animal. Imagine if you, as a road user, had the possibility to receive warnings when the risk of an accident according to statistics is extra high.Wildlife Detection Network is a wildlife warning system with an information service, which makes the whole concept unique. When an animal is approaching the road, it is registered by sensors, and warning lights along the road are lit to inform drivers of the potential danger. In conclusion, this is a direct warning to all drivers on the road where the system is placed.When an animal is registered by the sensors, information containing time, date, weather circumstances and coordinates are sent to a database.

Introduktion: Dental erosion definieras som förlust av tandens hårdvävnad genom en kemisk process som inte involverar bakterier. Dagens förändrade livsstil och kosthållning medför att våra tänder oftare utsätts för kemisk påverkan som kan leda till erosion. Det är flera faktorer som samverkar och dental erosion har en multifaktoriell etiologi.Syfte: Syftet är att beskriva olika registreringsmetoder för dental erosion.Frågeställningar: Vilka metoder kan användas för registrering av initial erosion? Vilka metoder kan användas för registrering av avancerad erosionsskada? Vilka metoder är kliniskt beprövade på patient?Metod: LitteraturstudieResultat: Ett flertal registreringsmetoder fanns beskrivna i litteraturen, merparten var inte applicerbara kliniskt. Registeringsmetoderna som framgick i den beskrivande litteraturstudien var: 3D scanning microscope (IFM), Atomic absorption spectroscopy (AAS), Digital photography (DP), Focus-variation 3D microscopy (FVM), Longitudinal microradiography (LMR), Non-contact confocal laser scanning microscopy (CLSM), Optical assessment, Optical profilometry (OP), Quantitative light-induced fluorescence (QLF), Scanning electron microscopy (SEM), Stylus profilometry (SP), Ultrasound, White light interferometry (WLI) och X-ray diffraction (XRD).Konklusion: Vid registrering av initial erosion krävs analys av tandytans mineralinnehåll samt optiska analyser med hjälp av instrument.

Platelet aggregation is a major and common problem in blood samples from cats. This greatly affects the accuracy of counting of the platelets. Because of the difficulties in counting feline platelets, results for patients and reliable reference values for cat platelets are currently so inaccurate as to be almost useless in diagnosis of thrombocytopenia. In this study we used an effective method to prevent platelet aggregation. Blood was collected in CTAD test tubes and prostaglandin E1 was added to the blood sample.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

This master of science thesis is focusing on how the fault handling on hardware connected toa control unit on a Scania vehicle is working. To the hardware counts buttons levers, sensorsand CAN. The work has been concentrated upon how the fault handling is working and if it ispossible to find any new fault modes.The control unit that has been studied is called the Coordinator and is the core in Scanias threenetworks of control units. The Coordinators work is to transmit messages between the threenetworks and to process signals from buttons, levers and sensors. The values is then usedinternally or is sent to other control units on the CAN networks.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.

Denna rapport handlar om optisk koherenstomografi, Optical Coherence Tomography (OCT), en relativt ny teknik som blivit allt mer attraktiv på sjukhusens ögonkliniker. En OCT-apparat används bland annat för diagnosticering av ögonsjukdomar lokaliserade i gula fläcken och runt optiska disken. I maj 2007 köpte Ögonkliniken på Blekingesjukhuset in en 3D OCT-1000 av märket Topcon. Hos denna OCT-apparat finns en mätfunktion, Caliper, som mäter näthinnetjocklek. Studien i denna rapport syftade till att ta reda på vad Caliper mäter, hur den mäter och om den går att lita på.

Denna rapport handlar om optisk koherenstomografi, Optical Coherence Tomography (OCT), en relativt ny teknik som blivit allt mer attraktiv på sjukhusens ögonkliniker. En OCT-apparat används bland annat för diagnosticering av ögonsjukdomar lokaliserade i gula fläcken och runt optiska disken. I maj 2007 köpte Ögonkliniken på Blekingesjukhuset in en 3D OCT-1000 av märket Topcon. Hos denna OCT-apparat finns en mätfunktion, Caliper, som mäter näthinnetjocklek. Studien i denna rapport syftade till att ta reda på vad Caliper mäter, hur den mäter och om den går att lita på. En OCT-undersökning utfördes på tio testpersoner.

The Blötberget deposit is situated in the north-western part of Bergslagen. The mineralization is an apatite-iron oxide ore of Kiruna type. In Bergslagen the apatite-iron oxide ores occur along a zone from Grängesberg through Blötberget to Idkerberget in the northeast and they represent the largest and the most important iron oxide deposit in Sweden, south of Norrbotten.Different REE hosting phosphate phases has been studied by optical microscopy and analyzed by EDS attached to an electron microscope.The key minerals other than iron oxides are apatite, monazite and xenotime. The relative concentration of the REE-bearing phases differs from the other apatite-iron oxide mineralizations in the area, for example Grängesberg, by a higher concentration of xenotime and lower contents of allanite..

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

Outside of many Swedish households today, you will find a typical green wastecontainer. This container has not changed since its introduction, despitecomplaints about foul-smelling and its impractical system. Even if the system usedtoday, still is the most optimal choice, there is a lot of newly developedalternatives out there.Its purpose is to get a broader perspective on how a waste management systemcan be developed into a working, land efficiently and aesthetically pleasing systemof humans and the environment in a small residential area.The authors treat the residential area of Jära, Ekhagen, in Jönköping, which ismanaged by JM AB as a problem area in regards to waste management.The issues raised by the authors are the different waste management systems usedin the corresponding areas of the world, how to apply technical andenvironmental as well as the waste management facilities from financial aspects.In the process, the methods used were literature reviews, case studies and aninterview. The case study was done through a modeling of waste managementsystems in the area Jära and an interview was conducted with the company Envacworking with vacuum systems. Studies have been made by different systems n theareas around the world.The results show that using directives and guidance will reduce the environmentalimpact done without replacing the traditional system.

This report describes the manufacture and control of a flying platform. The report describes the basic and fundamental theories required to get the platform flying. It touches on subjects such as A/D-conversion. PWM-control and PID-control. The sensors used in the platform are a gyro and an accelerometer.

In nature there are about 4,500 minerals identified. These can roughly be divided into two groups, opaque phases and non-opaque phases, with the exception that some opaque phases also may act as a non-opaque phase in different circumstances. The division is made on the basis of the optical properties. Opaque phases are nontransparent, which means that a different type of microscope must be used. A conventional microscope uses transmitted light while the microscope for opaque phases or the ore microscope uses reflected light.