This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The work was an assignment from Jarlträ AB which is a privately owned sawmill located in southern Småland. The aim of the work was to investigate the economical result of different pricelists and how to adjust different parameters such as length correction to give an optimal result. The pricelists was examined through a computer program (SilviA). The pricelists was made in the program and after that a simulation was preformed with a selection of random sampled trees gathered from the area nearby the sawmill.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Våren 2011 var det stora debattämnet i media, bland konsumenter och hos fastighetsmäklarelockpriser. Med lockpris avses att en bostad annonseras till ett väsentligt lägre pris än detbedömda marknadsvärdet på bostaden. Motivet var att locka till sig fler spekulanter till eneventuell budgivning. Innebörden avväsentligt är inte helt fastställt i lagen, vilket görbegreppet svårtolkat. I och med attutgångspriserna var satta så lågt jämfört med vadslutprisetblev så fick fastighetsmäklarna utstå mycket kritik.

The forecast ability of four well-known exchange rate models for theSwedish krona is tested in this thesis. The models that are tested arethe purchase power parity, the real interest differential model, thesticky-price model and a productivity model. In addition to thebenchmark, the random walk, they are also compared to each other.They are all tested on three different horizons one quarter, two quartersand four quarters. The mean squared forecast error criteria and thedirection of change criteria are used for evaluation of the forecastability. Only in a couple of cases are the forecast ability of thetheoretical based models significant better than the random walk..

In this degree project we wanted to investigate if there are any possibilities to get a higher income from grain growing by giving the grain to hens instead of selling it. We were also wondering if the manure has any value or if it only cost the egg producer money. If the egg producer cultivate his own grain and is able to store it in layer is there quite much money to earn. Expensive pasture makes it profitability to pay up to 1,35 Swedish crowns for a kilo of wheat. In our calculating we?ve used calculation from the company Lantmännen.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

This Thesis deals with the two concepts branding and position, more precisely how companies with a small marketing budget needs to work with these two concepts. The purpose of this thesis is to understand how these companies are able to assert a position  on their specific market. The thesis treats theories and empirical data to be  able to answer the purposes of the thesis and for the authors to be able to give recommendations of how companies in this situation can improve their marketing strategies. To be able to give these recommendations a more in depth study had been made of a carsharing company, Sunfleet. This to be able to se how a specific company works with branding and positioning as well as what can be improved.

The aim of this study was to investigate the possibility of performing inter-species embryo transfer under actual field conditions in the natural habitat of South American camelids. In this study embryos from llamas were transferred to alpaca recipients. In a parallel study alpaca embryos were transferred to llama recipients. All animals used were free of uterine and ovarian abnormalities detectable by rectal palpation and /or ultrasound examination. Embryos were harvested twice after single ovulation in 10 mated female llamas and non-surgically transferred to synchronized alpaca recipients.