This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

The aim of this study was to review scientific articles to evaluate which nursing treatment are in use to ease problems such as dysphagia, mucositis and xerostomia and its efficiency. The method was a literature review in which the scientific articles where found in the database PubMed. A total of sixteen articles where included, these articles where analyzed based on their quality and contents. The result showed that electrical stimulation and rehabilitation was used against dysphagia, they both had a doubtful effect. Mouth washes was commonly used to reduce mucositis; triclosan mouthwash, benzydamine mouthwash, sacralfate mouth wash, povidone-iodine and salt-sodium mouthwash showed effect.

Our aim in this work has been to redesign ModernFamilies and make a user-friendly interface for people with aphasia. The focus has been to identify general issues they might face while using different technology and applications, in order to find better alternative design for ModernFamilies, with a focus on usability. To approach this issue, we used a qualitative method. Our study includes several interviews and observations preformed in conjunction with the AGNES project (AGeing in a NEtworked Society) and speech therapists. Aphasia requires simple design that in the same time gives them support to understand and use technology and different applications.

Vida Skog is supplying the whole Vida Ltd?s mills with wood raw material. This study aims to evaluate Vida Skog?s contractors and the relatively new contractorportal and to identify measures that are important for the contractors? skills. The purpose with the portal is to facilitate co-operation between contractors and buyers by streamlining the logistics of the whole wood supply process.The study was conducted in the form of a questionnaire.Most of the respondents were positive to the portal.

Petro-electric IFVs (Infantry fighting vehicles) or hybrid-IFV?s are not a new phenomenon. During the 1900?s Germany as well as the U.S both tested vehicles constructed with hybrid technology. In spite of several identified advantages, no serving hybrid-IFV exists today.

In this study, the pre-tension force in an insert screw connection are examined in order to establish a greater understanding of the system and to facilitate the process of making new metal cutting tools. Certain especially significant design variables such as the offset, the length of the contact thread and the shank length above the threaded hole, are selected to be closely examined. A comparison of the influence on the pre-tension force between threaded holes made with a worn, versus new, threading tool is also involved in the experiment. The study is limited to handling the screw sizes M2,5 and M3,5. The results show that a regression model, with good approximation, can be fitted to the measured values.

Boberg at Scania CV AB. The purpose was to investigate the technical and customer oriented possibilities for the development of a transport security measure against cargo crime, which is a growing problem in Europe. The main goal was to develop a concept that is possible to implement in the Scania CV AB Fleet Management System. Another goal was to develop a security model that will be used as a tool during Scania CV AB?s future development projects of transport security concepts.The work was divided into three main parts: a background study, handling cargo crime, transport security Scania CV AB trucks and market analysis, a stakeholder investigation including a questionnaire and interviews, and a concept development session.

In this paper, a navigation support approach for speech-only interaction based on auditory icons for room-based designs is presented, i.e. naturally occurring sounds that have a natural mapping to the system's underlying design metaphor. In contrast to many recent investigations that have focused on multi-modal or augmented reality systems, this paper concerns a unimodal speech and sound-only system. An auditory icon based prototype system for buildings maintenance support using a room-based metaphor was developed. The design was evaluated in a comparison with earcons and no-sound designs.

Allting började med att jag fick i uppdrag av Euromaint Industry i Skövde att konstruera en alfanumerisk display i syfte att ersätta en utgången display som inte längre nytillverkas. Jag fick i uppdrag att välja ut en modern, lämplig grafisk display och bygga ett interface mellan den nya displayen och den industriella maskin som displayen skall sitta på. Efter att ha letat hos någraelektronikleverantörer kom jag fram till att en TFT-skärm från det japanska företaget Kyocera var den som passade bäst. Skärmen hade ett VGA-liknandeinterface och min uppgift blev att sätta mig in i hur VGA fungerar. Efter att ha konstaterat att det krävdes en snabbare krets än en microcontroller för att använda VGA, var det endast en programmerbar logikkrets, en FPGA, som gällde.

The present work is a continuation of the ideas developed in previous projects during my Masters studies that explored the relation between pattern, form and space. Starting from the pattern multiplication for space construction the present project proposes textiles as an assortment of flexible expressions. The purpose of the project is to explore aesthetic and functional potential of textiles for out door temporary structures. This is to create a pattern interface which filters sunlight through a textile surface to offer instant sheltering solutions for out door activities. The project combines research and analyses of outdoor temporary structures and scope of textile in the area.

My work has resulted in an interactive search engine for plants that can be found at www.plantit.se. In the work process I have searched for which search criteria is most important when doing searches on woodland plants. I have done this by an analysis of existing databases and with an survey where leading plant expertise answered questions about woodland plants. I analyzed three search pages that are on the internet today Havenet.dk, Backyardgardener.com and Den virtuella floran. I concluded that there are several flaws but also many positive aspects that I have used when developing the interface of my page. The survey resulted in the basis for my search criteria the answers listed the most important factors when planting woodland plants. From this information I developed a system with five values on every criteria.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

This master thesis studies how much the cycle time, i.e. the time it takes for an industrial robot to perform a given task, can be reduced if an extra degree of freedom (DOF) is added to the robot system. The extra DOF consists of a linear track, which is supposed to be used in an optimal way. The problem has been studied using simulations in the robot simulation tool RobotStudio. To be able to run an optimization in Matlab, with the RobotStudio simulation cycle time as the object function, communication between Matlab and RobotStudio has been set up with an interface written in Visual Basic.

Examensarbetet var en utvärdering av en synkron trefas permanentmagnetmotor med utvändig rotor. Den är tänkt att ingå i ett batterimatat drivsystem för hjälputrustning på segelbåtar. Målen var att kartlägga prestandan i standardutförande samt att hitta de svaga punkterna i konstruktionen. Förslag på hur motorutförandet kan optimeras ska också läggas fram. Tester och mätningar gjordes i en testuppkoppling med växelriktare, motor och axelkopplad generator. Detta för att kunna få fram fler mätvärden på motorn.