Our examination project has been to develop today?s existing walking frames and make them more exiting and user friendly for tomorrow?s users.The use of a walking frame today makes it easier for a person with a movement difficulty in different extent. It makes it easier with their living condition and the user get a more movement easier life where they can take care of the daily chores without any help from the society or the family members.With our product we get a product that not only makes it easier for the user to get out and get forward. We help the user to get forward where they often would have difficulties to get forward. An example is where its more steeper parts where it could be more difficult to get up or down and even with more difficult foundation due to bad weather.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

This is a feasibility study that examines various aspects of building a wind farm on Malmön in Norrköping. The feasibility study deals with interests of conflict, park design, electrical connections, production calculation, financial calculations and operating- and timetable.The report is divided into two distinct parts. First a theoretical part, which deals with conflicting interests, park design and electrical connections. Second a part with simulations dealing with production calculations, and financial calculations.Opposing interests are mapped so that problem areas can be found, and help put focus on the right places at a future environmental impact assessment (EIA). There are a number of areas where planners have to assess on an EIA, this thesis point on the most important areas.

ROS är ett produktnära system som stödjer planering och återrapportering i stålverket. Sandvik vill undersöka möjligheterna att modernisera användargränssnittet på detta system som idag är terminalbaserat till ett modernt grafiskt interface. Två metoder analyseras, den ena innebär att använda en kommersiell produkt för screen scraping och den andra metoden är Web Services Integration Toolkit som är freeware. Resultatet från analysen visar att Web Services Integration Toolkit klarar av att uppfylla de mål som är satta. En testkörning av Web Services Integration Toolkit görs också på ROS och resultat visar att metoden fungerar även fungerar i praktiken..

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Denna rapport är en beskrivning av ett examensarbete utfört vid SPM Instrument AB i Strängnäs. SPM Instrument utvecklar och tillverkar produkter för konditionsmätning av maskiner. Målet var att skapa en cd-presentation i redigeringsprogrammet Macromedia Flash 5.0, som på ett enkelt sätt med rörliga bilder förklarar en konditionsmätningsmetod som kallas för Stöt Puls Metoden.Uppgiften löstes genom att först inhämta information om Stöt Puls Metoden, sedan utformades Flash-filmen och slutligen testades och utvecklades filmen tills dess att jag och SPM Instrument var nöjda.

This report describes the work and the results found when comparing three different 3d modeler applications. The programs are 3ds Max, Maya and Cinema 4D. The comparisons focus on the possibilities/the amount of freedom these programs interface offer to its plugins. The comparisons are made from the point of view of a tool for creating animations developed as a plugin for these modelers. This plugins demands on the system it is loaded into have been analyzed and from the results of this analysis a template have been created.

Full-field flash electroretinography is an electrodiagnostic method used to examine the function of retinal cells. Light stimulation of the eye elicits electrical potentials in the retina. By aid of a corneal electrode and a reference electrode close to the back of the eye, the electrical potentials can be recorded and presented as an electroretinogram (ERG). ERGs driven by mainly one type of cones can be used to examine the function of a single cone class. In human beings, studies have shown the cone class sensitive to light of short wavelengths, the S-cones, to be more vulnerable to acquired damage than the other cone classes (Daley et al., 1987; Gouras et al., 1993; Greenstein et al., 1989). Dogs have two cone classes, S-cones, and M/L-cones (most sensitive to medium to long wavelengths).

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

För att en kvalitativ och driftsäker kraftomvandling från vind till elkraft skall erhållas ställs krav på en mängd olika faktorer. Klimatologiska och tekniska faktorer kräver korrekt dimensionering och anpassning av omvandlingstekniken för att största möjliga energimängd skall kunna omvandlas på ett driftsäkert och energieffektivt vis som vindkraftsägare, nätägare kräver. Vinden är som bekant en oberäknelig kraftkälla. Variationerna i styrka och tid kan innebära en hel del driftoptimeringsproblematik med efterverkningar för vindkraftsverket, nätet och belastningen. Konsekvenserna kan bero på vilken typ av teknik som är installerad i de olika delarna av energisystemet och i områdets elnät.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

Our aim in this work has been to redesign ModernFamilies and make a user-friendly interface for people with aphasia. The focus has been to identify general issues they might face while using different technology and applications, in order to find better alternative design for ModernFamilies, with a focus on usability. To approach this issue, we used a qualitative method. Our study includes several interviews and observations preformed in conjunction with the AGNES project (AGeing in a NEtworked Society) and speech therapists. Aphasia requires simple design that in the same time gives them support to understand and use technology and different applications.

Thousands of people all over the world suffer from injuries that temporary affects their ability to speak or inother ways communicate. A very common procedure for persons that suffer from some kind of breathingproblem in the higher parts of the neck is called tracheotomy. This prevents the patient from speaking whenno air passes the vocal cords. There have been many studies done to understand how these patientsexperience this period. The results are consistent, the patients often feel fear, frustration and worries aboutthe future.Tobii Technology develops a technique called eyetracking wich enables persons to control a computer with theeyes.

Vi har i detta arbete skapat ett API för widgets på Android och iOS för Visiarcs utvecklingsverktyg CoffeeMaker. CoffeeMaker använder sig av multiplattform-API:t Cocos2dx och försöker, i så stor utsträckning det är möjligt, förhålla sig till det reaktiva programmeringsparadigmet. Vi använde oss av olika designmönster för att jämna ut skillnaderna mellan Android och iOS interface och implementerade funktionalitet för knappar, checkboxes, radioknappar och textfält på dessa två plattformar. Dessa widgets tematiseras enligt ett JSON-liknande format och använder sig av en texturatlas för att spara resurser. Vi behövde en texturpackare som lämpade sig att köras under en applikations initiering och ibland även under själva körningen.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.