The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

A good power quality can be an important prerequisite to achieve a sustainable society. Scandinavia's electrical system is in many respects superior, and Sweden has a fossil free electricity generation at 97 % and a reliability of electricity distribution at 99.98 %. Meanwhile, the EU has an ambition to expand the electricity market in order to achieve a joint trading business across Europe. This cross-border market will result in a large proportion of fossil energy sources integrated into our electrical system, which also leads to an increased need for renewable electricity production in Sweden. One part of this development is to increase the share of renewable micro generation that is locally or regionally connected to the power grid.

I den här rapporten undersöks Command Query Responsibility Segregation (CQRS),Event Sourcing och Task Based User Interface (händelsebaserat gränssnitt) somtillsammans bildar en annorlunda arkitektorisk uppbyggnad av system. Tanken bakomarkitekturen är att kunna spåra vad, när och hur data förändras i ett system samtmöjlighet att återskapa tidigare tillstånd, jämfört med traditionella system som endastlagrar, hanterar och presenterar data i dess nuvarande tillstånd. Undersökningen hargjorts genom att ta fram en bokningsprototyp och resulterade i för ?och nackdelar,användningsområde och hur CQRS, Event Sourcing och händelsebaserat gränssnitt kanimplementeras tillsammans..

Att utforma interaktiva TV-tjänster skiljer sig på flera sätt från att designa för webb eller för vanliga PC-tillämpningar. Faktorer som lägre bildupplösning, längre avstånd mellan användare och skärm, och inte minst användandet av fjärrkontroll istället för tangentbord och mus gör att villkoren ser annorlunda ut än för PC-tillämpningar. I detta arbete beskrivs hur en videobutik för en set-top-box för digital-TV utformas via iterativ hifi-prototypning och utvärdering. Lärdomarna är tillämpbara på andra interaktiva TV-tillämpningar..

Music production software has a strong tradition of two-dimensional graphical user interface (GUI), in which the time line is represented as a flat composition either horizontally (from left to right) or vertically (from top to bottom). In my degree work titled Sequi, I approach music composition from a different angle. Instead of a two-dimensional time line with only two possibly ways of progression (forward or backward) I constructed a three-dimensional GUI with the maximum of four different ways of progression from any given point in a composition. The height axis is used to describe time-intervals (the time between downbeats) and the wide and depth axes are used to describe progression from one sound to another..

Android-applikationers användargränssnitt kan se annorlunda ut på olika Android-enheteroch det är svårt att anpassa en applikation efter alla enheter då det finns så många unikamodeller. Målet med arbetet var att framställa ett verktyg som kunde med hjälp av ett korrektdefinierat gränssnitt, upptäcka skillnader i gränssnittet mellan olika Android-enheter.Ett egenutvecklat verktyg framställdes och hade en hög precision. Verktyget kunde bådaupptäcka skillnader och rapportera hur stor skillnaden var mellan gränssnitten..

This exam paper has been made with the health care center Aroma in Vetlanda. The work was to deliver a complete web portal with an integrated booking system. The objectives were to provide a complete informative website for Aromas users with the option to make an appointment for a vaccination or health certificate, order prescriptions and get update information directly published by Aromas staff. And to give the staff of Aroma a graphical Web interface to manage the content and the booking system.The report goes through the basic language used and why. Further it takes up it how works and how the final product looks and behaves..

Many interactive products constructed today is not produced towards a specific targetaudience and how they will interact with the product. This master's thesis follows the designprocess in the development of the Let's Walk webapplication. In the designprocess has users of the webapplikation been identified, prototypes developed and an interactive version has been evaluated. The Let's Walk webapplication is a fully working system used to administrate Let's Walk, an exercise competition between companies. Experts and users have been involved to evaluate the Let's walk high-fidelity webapplication prototype.

Many interactive products constructed today is not produced towards a specific targetaudience and how they will interact with the product. This master's thesis follows the designprocess in the development of the Let's Walk webapplication. In the designprocess has users of the webapplikation been identified, prototypes developed and an interactive version has been evaluated. The Let's Walk webapplication is a fully working system used to administrate Let's Walk, an exercise competition between companies. Experts and users have been involved to evaluate the Let's walk high-fidelity webapplication prototype.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

IT exist and are needed in larger organisations today, this creates possibilities for new applications. It has become more frequent with IT within HRM which has developed new concepts like e-HRM and HRIS which links IT and HRM together. We have through qualitative content analysis of interviews investigated how IT-tools affect HR-workmanship. The purpose is to create a basis for describing how employees experience their work with HR within a PA-system. The basis of the PA-system will then answer if it contributes or limits the employees and their activities.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

I den här uppsatsen har faktorer för en ökad användaracceptans och diffusion av Video on demand(VOD)-tjänster identifierats med hjälp av en litteraturgenomgång av tidigare studier i acceptans och diffusion. Litteraturgenomgången ligger till grund för en lista av faktorer som gör en konsument mer villig att anamma en VOD-tjänst. Faktorerna har sedan utvärderas genom en kvantitativ undersökning med hjälp av en webbenkät. Resultatet blev i stor grad det som förväntat där det framgår att utbud och kostnad är de viktigaste faktorerna för en hög acceptans, men även andra faktorer kan spela in som användarvänlighet, kvalitet och sociala faktorer..

This essay brings up how experienced texture artists in game development can get comfortable in their workflow and therefore not spend time on learning new techniques that in the end could be more efficient. We base this on theories that people often choose the path of least resistance, which in the case of an experienced texture artist would be the path they have learned and are comfortable with. We also talk about the popularity of Photoshop and that many of today?s texture artists in the game industry are using it and that this could be because Photoshop was one of the first programs that could be used well for texturing. Because of this many learned to use it and stuck by it and then taught Photoshop to new texture artists because that is the program that they know.