When planning new wind farms, the cost for the internal electrical grid is estimated to account for 8-9 % of the total investment cost. On top of that, the cost for accumulated reduced income over several years (due to electrical losses), has to be added. The economic lifespan is relatively long (about 20 years) which means that an error in the loss calculation could lead to a bad decision basis. The accumulated reduced incomes due to electrical losses can be higher than the initial investment cost for the internal electrical grid.Today, Statkraft Sweden is using a template number when estimating the electrical losses in a wind farm. The actual losses are probably lower than the template number which could lead to an unnecessary high loss cost when planning a new wind farm.The aim of this M.Sc.

Active work to increase the efficiency of energy use is taking place in Sweden and throughout all of Europe. Electricity is an important part in our society?s energy system which means that the electrical grid operators and associated therewith has a central role in this work. Monitoring and controlling the electrical grids are managed from the distribution system operator?s DC, dispatch center.The aim of this report is to examine how the operations in a typical DC on the Swedish electricity distribution network will look like in five to ten years.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.

This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test drive of the systems and the assignment wasapproved..

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Detta examensarbete är utfört vid Hägglunds Drives AB i Mellansel där man utvecklar och tillverkar hydrauliska radialkolvmotorer som Compact, Marathon och Viking. Compact motorn har problem med läckage vilket lett till att Hägglunds Drives AB beslutat att studera det problemet närmare. Syftet med arbetet är att experimentellt studera läckageproblemet. En testrigg för radial tätningar har tagits fram där olika tätningar kan testas. Testriggen kan variera temperaturen på oljan, trycket i tätningshuset och det dynamiska radialkastet.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

Denna rapport är resultatet av ett examensarbete utfört vid Luleå Tekniska Universitet på uppdrag av Hägglunds Drives AB i Mellansel. Hägglunds Drives AB är tillverkare av kompletta hydrostatiska transmissioner för industriella driftapplikationer. Företaget har arbetat med att skapa produktionsflöden enligt principerna för Lean Production sedan 2006. Uppgiften för examensarbetet består av att utföra en värdeflödesanalys och målet är att finna ekonomiska, tidsmässiga och arbetsmiljömässiga förbättringar inom: ? Flödet ? Kapitalbindning ? Förenklad planering ? Minskat slöseri ? Sänkta lagernivåer De flöden som ingått i analysen är cylinderblocksflödet och kamringsflödet.

The effects from a planned wind farm on the grid utility Gävle Energis electrical grid have been studied. The wind farm is planned to be built in the forest 15 km north of Gävle and will have 23 turbines with rated power from 2 to 2.5 MW, resulting in a total installed power between 46 MW and 57.5 MW. The grid connection will be made at 70 kV. The aim of the analysis was to determine what effects the wind farm would have on the power grid in the form of electrical disturbances (flicker etc.), need for new investment and raised operational cost. To allow the connection of the wind farm technical solutions (new lines, power stations and grid reinforcements) have been constructed.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

This study deals with integration between core subjects and character subjects on the upper secondary schools Electrical Engineering Programme. The purpose is to investigate how four teachers define subject integration, which the advantages and disadvantages are according to them and what the purpose is whit integrate the core subjects and the character subjects.The finding in this study highlighted that between themselves the teachers had different definitions of subject integration. In order to start up with a integrated working model the teachers had to come up whit a mutual definition of subject integration..

Detta examensarbete är utfört vid Luleå Tekniska Universitet på uppdrag åt Hägglunds Drives AB i Mellansel. Hägglunds Drives tillverkar kompletta hydrauliska drivsystem, som inkluderar hydraulmotorer. I en hydraulmotor uppstår det slitage när metalliska ytor kommer i kontakt med varandra när till exempel ett lager får otillräcklig smörjning. Slitaget ger upphov till metalliska partiklar som cirkulerar i hydrauloljan och samlas upp i ett filter. Genom att samla upp och studera slitagepartiklarna kan man uttala sig om hydraulmotorns kondition.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.