When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

En prototyp till en förarstol för det militära fordonet SEP har tagits fram av tidigare anställda på BAE Systems Hägglunds AB i Örnsköldsvik. Stolen måste uppfylla en omfattande mängd krav då den är tänkt att användas i ett stridsfordon, och av personer av varierande storlek. Den nuvarande prototypen för stolen anses dock vara för dyr och det har dessutom framkommit en del klagomål på konstruktionen. Stolen måste därför göras om så den blir både billigare och bättre. Genom att ta del av tidigare genomförda tester på BAE Systems, samt genom att göra nya tester upptäcktes det dels vad som var dåligt och därmed behövde göras om, och dels vad som var bra och kunde tänkas behållas.

This thesis conducts a comparative study between two academiclibraries, one Swedish and one English, in order to analyse ifdifferent funding systems influence the marketing of theirservices. The theoretic foundation is built on relationshipmarketing, which emphasises the importance of creating andmaintaining relationships. A qualitative approach has been usedthrough the use of case studies, with semi-structured interviewsbeing held with library staff and managers in both countries. Inaddition to these interviews strategic plans have also beenanalysed. The result from the study shows that whilst there aresome differences between the two university libraries there arealso similarities, which indicates that it is not clear if differentfunding systems have an impact on the marketing of the services..

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.

Corporate social responsibility, CSR, är ett aktuellt koncept och dess efterfrågan ligger till grund för studien. Konceptet präglas av begreppsförvirring som bidrar till att framställningen av konceptet är intressant att studera. Studien syftar till att beskriva hur managementkonceptet CSR framställs i svensk populärmanagementpress utifrån ett utbudsperspektiv, där förespråkare för managementkoncept är identifierade som drivkraft för adoption. I studien utvecklas en modell för hur CSR-konceptet framställs i populärmanagementpress. Genom modellen kan detta beskrivas och analyseras.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

An investigation into the industrial and economic conditions concerning the production, distribution and showing of what the contemporary hegemonic entertainment industry labels independent film..

The purpose of this paper is to create an understanding of the negotiation process behind the decision of who will stay at home with a sick child and to develop the knowledge of the mechanisms considered to affect the negotiation process, in particular, the mechanisms likely to contribute to an uneven use of care leave. In the study six interviews were conducted with three sets of parents. These interviews were then analysed with Janet Finch?s (1989) definition of negotiation of family responsibilities. The study finds that the negotiation on care leave is a result of the negotiation of the shared view of reality.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.