This thesis deals with the ethical attitudes of professionals working with Methadone or Subutex assisted rehabilitation, concerning the constructed guidelines and directions from the Swedish National Board of Health and Welfare. The central themes in the thesis are: 1. What do professionals think of the rules concerning admissions to the rehabilitation programme? 2. What do professionals think of the rules/criteria for being excluded from the programme? 3.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Background: Students, at a secondary upper school, attending a practical programme have a lower physical capacity than students from theoretical programs. Our physical self-esteem has a great significance for our motivation in being physically active and thereby also for our health. The purpose: of this study is to find out if there is a difference between perceived physical self-esteem and objectively measured physical activity between students attending a practical programme and a theoretical programme. Method: Four classes, in a medium-sized town in the southeast of Sweden, participated in the study, two classes from practical programmes and two classes from theoretical programmes. All the students were in their final year at the upper secondary school, when they were part of the study during the autumn of 2011.

Society and the workplace are two factors that are important for the individual's health status. It is important that the individuals has the right skills to take care of their health. For organizations, it is important to strive for the welfare of their employees. This has proven to have a positive impact on work performance, reduced absenteeism and reduced costs for rehabilitation. In 2007, the local authorities in Umeå implemented a wellness offering for all employees working in the municipality administration.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

The effects from a planned wind farm on the grid utility Gävle Energis electrical grid have been studied. The wind farm is planned to be built in the forest 15 km north of Gävle and will have 23 turbines with rated power from 2 to 2.5 MW, resulting in a total installed power between 46 MW and 57.5 MW. The grid connection will be made at 70 kV. The aim of the analysis was to determine what effects the wind farm would have on the power grid in the form of electrical disturbances (flicker etc.), need for new investment and raised operational cost. To allow the connection of the wind farm technical solutions (new lines, power stations and grid reinforcements) have been constructed.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

Background: Students, at a secondary upper school, attending a practical programme have a lower physical capacity than students from theoretical programs. Our physical self-esteem has a great significance for our motivation in being physically active and thereby also for our health. The purpose: of this study is to find out if there is a difference between perceived physical self-esteem and objectively measured physical activity between students attending a practical programme and a theoretical programme. Method: Four classes, in a medium-sized town in the southeast of Sweden, participated in the study, two classes from practical programmes and two classes from theoretical programmes. All the students were in their final year at the upper secondary school, when they were part of the study during the autumn of 2011.

This thesis has been carried out in collaboration with the IT Company MPQ consulting AB in Halmstad. The task we were assigned by MPQ concerned the development of a scooter that can be used year round. We have with the companydeveloped the criteria and requirements for the product in which the goal is toproduce a primary solution that meets the set criteria and fall within the project'sboundaries.The project involves a wide range of different design methods for idea generationand idea development. The project also addresses engineering methods such asprinciple and primary engineering. Occurringmethods in the project include FredyOlsson principle and primary engineering in cooperation with SVID's - Swedishindustrial design process, etc.The final solution will be presented in the form of sketches, CAD models withassociated drawings and a rendering from the program Keyshot..

During the years of development in the 60s and 70s the need for new housing in Sweden arose. Sweden was going to be the most modern country in the world. This period has later been called ?the time of the big programmes?. One of the parts in this building of a welfare society was a large policy of building politics with few counterparts in history.

The object of this essay was, first, to study what advantages parliamentary members in the participating countries argue that their country gains when university students study abroad via ERASMUS, and, second, to study two factors that might affect what advantages that are emphasised by the parliamentary members in the participating countries. To achieve this object, two research questions were posed regarding what advantages of the ERASMUS Programme are mentioned in the parliamentary debate in three countries, United Kingdom, Sweden and Germany, and regarding whether the parliamentary debate is different between the countries as concerns what advantages are emphasised. Subsequently another two research questions were studied, regarding whether the countries? different positions in Europe and the existence of euroscepticism in these countries affect what advantages of the ERASMUS Programme are emphasised in the parliamentary debate. The study was carried out using argumentation analysis, in which the arguments for participation in the ERASMUS Programme presented in the parliamentary debates were compiled and grouped together according to whether they refer to economic and professional advantages or to cultural and social advantages.