Sökresultat:
394 Uppsatser om Electric vehicles - Sida 4 av 27
H2 För racing
AbstractMotor sports have been around as long as motor vehicles have been. Sports are often seen as costly polluter but in the same time the motor sports have encourages a large part of development, both for vehicles and other industries. Inventions like rear mirror and ABS brakes come from motor sports. One way to once again drive development forward while making motor sports carbon-neutral is to run the race cars on hydrogen. In this thesis, the goal is to convert a spark ignition engine for hydrogen operation.
Att leva med implanterad defibrillator : En intervjustudie
The study aimed to explore how patients with ICDs experience their quality of life with a focus on everyday life, electric shocks, and how support from the health service is perceived. The studydesign is descriptive with a qualitative approach. Semi-structured interviews were conducted with seven patients. Data collection lasted for three weeks and interviews were conducted in the participant´s homes, at the participants? workplaces or over the phone.The study shows that most participants have learned to live with the ICD.
Solenergi i Norrra Djurgårdsstaden
This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.
Gruppmålföljning av markobjekt
This Masters Thesis considers tracking of ground targets. Since ground targets often are difficult to detect with sensors a track is easily lost in ground target tracking. The main question in this thesis is whether information on close targets and observations of them can be used to make the tracking more reliable. An algorithm using Kalman filters and JPDA-association to create a group track for vehicles travelling together has been implemented in Matlab. Using the state of the centre of the group the state of a vehicle in the group can be updated.
Projektering av ett småhus samt ekonomisk jämförelse av värmesystem
Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.
Stockholm som elbilsstad 2030
I Sverige används det idag cirka 5,4% förnybara drivmedel inom transportsektorn, att jämföra med under 0,5% år 2000. Av de ickefossila drivmedlen är el något som ofta benämns som en permanent och realistisk framtida lösning. Visionen ?Stockholm ? Elbilsstad 2030? drivs av Stockholms Stad i samarbete med Fortum AB i syfte att ersätta den fossilbränsleslukande fordonsflottan.I den här studien undersöks de tekniska förutsättningarna och de eventuella vinsterna av ett storskaligt införande av elbilar. Studien har gjorts genom en modellering där parametrar som elbilens prestanda, elpris, bilens inköpspris och totala utsläpp använts.
PSQS ? Power Supply Quality Simulator
Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.
Kvalitetssäkring och processtyrningav ytstruktur på lackerat objekt
To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..
Störningsregimer vid Skövde övnings- och skjutfält : Stridsfordons påverkan på olika naturtyper i militära övningsområden
A lot of habitats have declined or disappeared as the old cultural landscape changed to the modern agricultural landscape of today. Places such as power line corridors, racing tracks, gravel pits and military training sites have become refuges for many species associated with the old cultural landscape. These sites have been exposed to ecological disturbances that create the same type of habitats that were found in the old cultural landscape.The military training sites in Sweden has an impressive diversity of species. Disturbances from the military exercises have created habitats that are important for a wide range of species.The purpose of this thesis is to study some of the ecological disturbances occurring in the military training sites of the Swedish Armed Forces and examine how they affect different types of habitats. The thesis explains through litterateur and field studies the reason to the rich biodiversity often found at military training sites.
Ethernet-baserat interkommunikationssystem för militära fordonssystem
The result of this master thesis report describes the advantages and the drawbacks that will arise when implementing an Ethernet based intercommunication system in military vehicles. The report presents a possible solution and describes how different sound applications will be implemented into the suggested solution. The report show that IP LAN in vehicles leads to more advantages than drawbacks. The main advantages are that all kind of media can share the same LAN and that there is a lot of knowledge of this technique in the civil area. The main drawback is about delay.
Karaktärisering, utvärdering och avsättning av Stena Metalls magnetiska fines
With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.
Automatisk nivåreglering av strålkastare
To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..
Energieffektiv torkning av kläder : en studie av torktumlare med varm- respektive kallvattenanslutning
Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.
EBH - Easy Battery Handling
The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.
Automatiskt avvägningssystem för obemannad undervattensfarkost
This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.