The object for this study is a company developing and manufacturing vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to implement their standardized theoretical product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

Hedge funds? importance within the financial system has during the most recent years increased dramatically. These special funds are unique instruments that differ from traditional mutual funds in a variety of ways, however especially in how they expect returns. Due to the fact that hedge funds are able to hold short positions they possess the possibility to become market neutral investment vehicles.Because of this possibility to sustain positions neutral to market fluctuations, the concept of absolute returns became a unique selling point for hedge fund managers and promises of stable returns unchallenged by market conditions was assured. This research paper aims to examine the theory of absolute returns in hedge funds by examining hedge funds from the Nordic region during the last years of economic turmoil that has occurred by  analyzing the results from their strategies, partially by quantitative measurements as well as qualitative.  The results show that none of hedge fund strategies managed to deliver absolute returns over the chosen period..

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

To give a realistic impression in a driving simulator for nighttime driving, there are many challenging aspects to consider. One of the most important aspects is the illumination caused by the headlights of the own vehicle. To give a realistic impression there is the need to consider the characteristics of the headlight in use to be able to represent main and dipped beam, but also to represent different models and types of headlights. Another important aspect is the dazzling effects caused by the light cast by other vehicles upon the driver. These effects are not only important to give a realistic and visually appealing simulation, but also to simulate blinding effects which may affect the drivers ability to perceive the traffic environment to a large degree.

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric Power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

When traffic in large cities increases, it becomes more vulnerable to disturbances such as accidents, stalled vehicles or construction; therefore, traffic jams are more likely to occur. For better control of the traffic at a disturbance the Swedish National Road Administration (SNRA) has traffic equipment which can be controlled from a command centre. This traffic equipment consists of gates and signs with variable messages. This report will discuss the system used for traffic control in Stockholm. It will present proposals designed to improve it.

Examensarbetet kommer underso?ka aktiv ljuddesign fo?r tysta personbilar. Utifra?n tidigare forskning om hur elbilen utsa?tter ma?nniskor i ta?tomra?den fo?r fara pa? grund av avsaknaden av auditiv information, ska vi utveckla fo?rslag pa? dynamiska billjud som fo?rha?ller sig till trafiksa?kerhet, design och minskade ljudfo?roreningar. Den totala ljudniva?n i sta?der a?r la?ngt o?ver rekommendationen och fo?ljden blir ett ha?lsoproblem i sto?rre sta?der.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

Studiens syfte är att belysa några yrkesverksamma elbasisters syn på egen utveckling och dess samband med övning. Som metod har halvstrukturerade intervjuer använts. Informanterna utgörs av tre yrkesverksamma elbasister som berättar om sin syn på övning och utveckling samt vad de anser vara viktigt för att utvecklas som elbasist. Den teoretiska utgångspunkten för denna studie är ett hermeneutiskt perspektiv då målet är att göra en djupare analys och tolkning av de intervjuades livsvärld. Resultatet visar att informanterna tycker att viktiga byggstenar i utvecklingen är att spela tillsammans med andra och lyssna på musik.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

If you have access to wood, a wood burning boiler is a cheap way to heat your home, but it is certainly not the most convenient option. Wood requires many operations and management, which takes time. One way to reduce this workload is to have a modern boiler with automatic ignition. Enertech/CTC has a desire to create an accessory with automatic ignition to a modern wood burning boiler. Today there is no boiler on the market that can ignite firewood automatically without the introduction of paper and sticks.

The purpose of this study is to investigate how much of the estimated annual electric energy production from Swedish wind power that actually was produced, as well as the history of this agreement over time. The aim is to also examine if there are properties that have caused some group of wind power plants to produce more or less, compared to their estimated production. Operational data on wind turbines collected by the Swedish Energy Agency was analyzed. A survey was made among owners of wind power plants with a nominal power of at least 2 MW. Two different methods for normal year correction of production data were used and compared.

Gtherm is an innovation company who has an unique air heat exchanger underdevelopment. The purpose of this thesis is to provide data of suitable motors for theheat exchanger and to find suitable motor suppliers.A motor specification was designed. It is an important basis for the search of suitablemotors. A compilation was made of nine motor suppliers and the suitable motorsfrom those. The compilation can be used by GTherm in their choice of suppliers andmotors.The compilation of the demands on the motor and analysis of suppliers indicated thatthere were no standard motors available to GTherms air heat exchanger.

In this qualitative study the authors explores, by studying several quality-development models what quality in leadership is. The models are: Total Quality Management; SIQ?s model for customer-oriented organizational development; the EFQM excellence model; the ISO 9000:2000 standard; and Six Sigma. These models will be compared from Deming?s list for upper management; the Situational Leadership Theory; and the Contingency Theory.