This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

Saab är ett varumärke som delas av två olika företag, försvars- och säkerhetskoncernen SaabAB och personbilstillverkaren Saab Automobile, idag ägt av NEVS, National Electric vehiclesweden AB. Här finns en potentiell problematik då två separata företag delar sammavarumärkesnamn och kan ha olika strategier för hur varumärkesarbetet bör fortgå. Syftet meduppsatsen är att beskriva hur varumärket Saab uppfattas idag vilket har undersökts genomfokusgrupper och en enkätstudie. Studien utgår från konsumenters associationer och resultatetvisar att Svenskt Tradition utgör en viktig del av varumärkesbilden. Överlag har Saab en bred,homogen och positiv varumärkesbild där varumärket Saab representerar båda de bolag somdelar varumärkesnamnet.

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

Automated Guided Vehicles, AGV:er, används i huvudsak som monteringsplattform inom tung fordonsindustri. En AGV kan användas vid montering av motorer, växellådor och chas-sin. AGV:n transporterar produkten genom en slinga i fabriken, där produkten monteras. Idag säljs AGV:n med ett löfte om femfaldig säkerhet mot brott för alla de ingående komponenter-na. AGV:n är konstruerad för att bära upp en last på maximalt 1800 kg, med säkerhetsfaktorn inkluderad.

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

Saab är ett varumärke som delas av två olika företag, försvars- och säkerhetskoncernen SaabAB och personbilstillverkaren Saab Automobile, idag ägt av NEVS, National Electric vehiclesweden AB. Här finns en potentiell problematik då två separata företag delar sammavarumärkesnamn och kan ha olika strategier för hur varumärkesarbetet bör fortgå. Syftet meduppsatsen är att beskriva hur varumärket Saab uppfattas idag vilket har undersökts genomfokusgrupper och en enkätstudie. Studien utgår från konsumenters associationer och resultatetvisar att Svenskt Tradition utgör en viktig del av varumärkesbilden. Överlag har Saab en bred,homogen och positiv varumärkesbild där varumärket Saab representerar båda de bolag somdelar varumärkesnamnet.

Jämtkraft AB which is a power production company in Sweden has bought two newhydro power units to their station in Hissmofors. The two new generators are using aconcept with sliding stator feet to handle the thermal expansion.The concept with sliding stator feet on hydro electric generators has not beenworking satisfactory on many hydro power stations in Sweden and has caused a lot ofcosts due to long downtimes.The new station in Hissmofors is very important for Jämtkraft AB, and therefore theywant to know how to make sure that the sliding stator feet are working as theyshould. According to theories and a simplified model of the generator the stator feetdisplacement should be around 1 -1,6 mm.The generators are delivered with a surveillance system that will measure thedisplacement of the sliding stator feet. The signal from the system isn?t accessible forJämtkraft AB but it will alarm when the sliding stator feet are malfunctioning.To secure the function of the sliding feet a logger for the surveillance system or adifferent measurement system must be used; if both systems are used Jämtkraft cansecure the function of the surveillance system..

The aim of this thesis is to investigate the correlation between the price of electric power and investments within the Swedish basic industry. Using regression analysis, the authors test for correlation between the electricity prices and the basic industry, defined as the pulp and paper industry, the mining industry, the steel and metal industry and the basic chemical industry. Moreover, five variables found in the literature on investment decisions are being used as a means of comparison. The results suggest that the electricity price affects the investment decisions within the basic chemical industry as well as the steel and metal industry. On a more abstract level, this thesis contributes to the understanding of one of the properties of the Swedish GDP..

This thesis investigates techniques for stealth hydroacoustic communication using spread spectrum. The Swedish naval defense organisations have a vision that all their units should be able to communicate with each other, even between underwater vehicles. But the properties of water makes it a complex channel to use for wireless communications. Radiomagnetic waves have very limited range in water, therefore acoustic waves are used. In this report the basics of wireless communication systems are described including source coding, channel coding, modulation techniques as well as different techniques for spread spectrum.

A trend in modern landscape architecture is to design pedestrian streets so that vehicles and people move in the same area. By doing this, traffic tends to slow down. On the market though, there is a lack of furniture that corresponds to the requirements of these kinds of public places. Therefore, I have designed this furniture, called VOX, which is planned to be used on streets, schoolyards and squares. One objective has been to promote the product to the industry.To achieve this, I have been in contact with people from different professions, which have all influenced my designprocess.

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

Examensarbetet som beskrivs i denna rapport är ett avslutande moment för en magisterexameni Teknisk Produkt- och Produktionsframtagning på Högskolan i Halmstad.Nilsson Special Vehicles i Laholm gav i uppdrag att förbättra slädsystemet i derasbegravningsbil baserad på Mercedes E-klass. Nuvarande system är föråldrat och harendast genomgått små förändringar sedan det utvecklades. Materialet, som är olikastålprodukter, gör att vikten är hög. Utformningen av systemet är från början utformat förett annat chassi än Mercedes vilket gör att det passar dåligt i denna bilmodell. Det ärframförallt lasthöjden som påverkas negativt.

Idag används guld som kontaktmaterial på elektriska kontakter för lågströmstillämpningar. Guldhar emellertid låg nötningsbeständighet, är dyrt och miljömässigt påfrestande att utvinna. Ettalternativt kontaktmaterial till guld är nanokomposit Ti-Si-C-Ag belagt medlikströmsmagnetronsputtring. Nanokomposit Ti-Si-C-Ag har hittills belagts med sammansatt Ti-Si-C sputterkälla och separat silverkälla.I detta arbete har filmer belagts från tre olika sammansatta Ti-Si-C-Ag-källor med tre olikakolhalter. Filmerna har belagts i två olika beläggningssystem: Ett konventionellt batchladdat ochett sekventiellt med sluss.Filmernas fas- och ämnessammansättning har studerats med XRD och EDX.