This report will present an energy efficient building in the centre of Kalmar city. It willbecome energy efficient because of the worldwide goal to reduce our energy using in ourbuildings.The values of architecture have been given a great part in this report. The building is supposed to be placed in Kvarnholmen in a unique environment in centre of Kalmar city.Because of the placement it is very important to show respect to the surroundings and the history of Kalmar..

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The Smart Grids development is driven by forces concerning safe electrictransmission done in an energy efficient way. Vattenfall Eldistribution AB has a visionto transform their electricity network into Smart Grids. To invest in Smart Grids theyhave a need to show their customers what advantages they will get from thedevelopment. This led to the formulation of this dissertation project where the aim isto identify products and services related to Smart Grids that will increase thecustomer satisfaction for Vattenfall Eldistributions private customers.The project started with a mapping of existing products and services on the Swedishelectricity market. From the mapping several development possibilities for VattenfallEldistribution were identified.

The purpose of this paper is to identify the factors affecting the experience transfer at the rotation of the missions. This is to identify the respective influences are inhibitory factor, which contributes to a less efficient transfer, or if it contributes to a more efficient handover. The method used for the production of this paper is a qualitative case study of squad leaders who have done service in Kosovo or Afghanistan. Through interviews with focus on the transfer of experience, both on individual and organizational level, the factors that affect are being identified. The model used is expressed in a general perspective, where each factor is categorized as inhibitory or contributing to success, and if it appears on an organizational or individual level.

För närvarande läses elmätare av en gång per år, detta leder till att kunders elräkning baseras på ett schablonbaserat belopp. Enligt riksdagens proposition 2002/03:85 skall dock alla elkunder, senast fr.o.m. 1 juli 2009, faktureras efter faktisk elförbrukning varje månad. Detta har lett till en stor marknad för fjärravlästa elmätare som nu är ett måste för att kunna utföra den tätare avläsning som krävs. E.ON ES Sverige AB som är beställare av detta examensarbetet har specialiserat sig på att installera, underhålla och läsa av fjärravlästa elmätare åt nätägare.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The purpose of this essay is to investigate which components previous scientific studies suggest that an efficient treatment for adolescents with behavioural problems should contain. For this purpose, an extensive review of scientific research conducted in Scandinavia has been read and will be presented in this essay. This essay also present an introduction to residential care in Sweden as well as to an alternative form of treatment for adolescents with behavioural problems called Multidimensional Treatment Foster Care (MTFC). The result of this essay suggest that treatment of adolescents with behavioural problems should be based on the emphasis of risk/resilience factors of the youth and that the treatment should be adapted to the youth?s individual personality and way of learning.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

AimThis paper has come about because of the author's own experience as a project manager at FMV. In various projects, I have wondered if there is a link between the programs and processes that I have to use in my daily work. Are these programs effective for managing projects and follow-up.MethodIn order to examine whether it is efficiently using standard software, I have asked a number of projects manager at FMV to respond to a questionnaire, the method is qualitative.AbstractEfficient project management will require a set of tools for planning, monitoring and evaluating. Often there is a demand for a comprehensive range of enterprise software applications and business solutions combined to one business solution. A relevant question is if it is possible to use standard software, i.e.

Transportation of pigs might be a welfare problem. Stress during and after transportation can negatively affect the meat quality or cause carcass damages, which leads to major economic losses every year. The transportation chain can be divided into several stages; loading, transport and unloading. This literature review focuses on unloading of pigs from a transport. When arriving at an abattoir pigs can be fatigued and need to be as smoothly unloaded as possible.

The energy sector is facing an impending paradigm shift. Today?s technology enables the end-user to generate their own energy locally at home. Furthermore, recently developed storage technologies make it possible to balance energy demand with stored energy and integrate district heating with the local power grid. This means that in the future heat and electric power will interact and energy flows is converted over energy boundaries.