The construction industry has demands on energy use in permanent buildings. How much energy that is permitted to use during the time the building is produced has no requirements. The purpose with this study is to learn how far Skanska has come with the work of making the building site more energy efficient.A literature study has been performed in the beginning of the study to survey what energy efficient arrangements that can be applied and how they operate. Using site visits and interviews the situations on the building sites have been studied as well as the energy efficient measure that are in use.Skanska has come a long way with the work of energy efficient building sites and they keep improving. They have improved half of their cabins so they use 50 % less energy.

Previous research has shown that the market reacts on stock recommendations. As the Internet has made financial information more available and cheaper to assess one could believe that the market reflects more available information today. If this is true the market will react less on recommendation made by journalists, which generally consists of processed public information. The stock market should thus be more efficient according to the efficient market hypothesis. This study examines initially if we can conclude that stock recommendations made by journalists generate returns above the expected returns, hence abnormal returns.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

Better, more efficient fertilizers with great productivity and economic returns are needed, but it is important today to find fertilizers that are also sustainable. It is also important to carefully monitor their impact on the environment, including potential side-effects. In this context, the microbial communities that carry out numerous essential functions contributing to a functional ecosystem are of particular interest. The present study is a complement to a pot experiment that investigated the potential of different waste products for use as fertilizers and how they affect the microbial community. In the pot experiment, the clearest treatment change in microorganism community function was found in the fully fertilized treatment used as a positive control. The question was whether this was indirect, i.e.

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

This survey was made during the autumn of 2002 and the beginning of 2003, on commission from the National Board of Forestry. The purpose with the survey was to gather experience and knowledge in the organisation about fencing and this was made through interviews. The ambition was also to get knowledge from people outside the organisation that have great experience of forestry and fencing. The interviews were based on questions that have been composed by the author with help from the supervisors. The questions were the same to both the personal from the National Board of Forestry and to the foresters. Interviews were also made with private landowners, gamekeepers, game researcher, the County Administrative Board, the National Road Administration, pole and net retailers and contractors. The target group for this work is the National Board of Forestry to be forwarded to persons interested in forestry with the ambition to spread knowledge about how to prevent damage on the forest by browsing animals. The deer populations are big in the south of Sweden and growing populations have increased the damage on plantations of broadleaves of the most species.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

In today?s tough business environment the need for good and efficient leaders are becoming more and more important. The businesses are in constant change, the world is more unpredictable and the competences of the employees are much greater today, which also calls for a new type of leader, a leader who not only is authoritarian, but also possesses soft skills. In this environment where there is this greater focus on leaders, leadership developments have emerged and increased in number over the last ten to twenty years. They try to develop leaders in all domains of their life, both professional and personal and the model we work with in this paper is Total Leadership, this model implies that you try to accomplish being a better leader throughout your whole life as a leader, to be whole, genuine and innovative, no matter career or position in life.

Title: Creating high awareness ? A study in how a company can create awareness with cost efficient marketing methods. (Skapande av hög medvetenhet ? En studie i hur ett företag kan skapa medvetenhet med kostnadseffektiva marknadsförings metoder).Authors: Alexander Edlund and Fredrik HanssonAim: Our aim is to reveal the pros and cons of cost efficient marketing and decide which cost efficient method works best in creating awareness. We also want to determine if the methods can be integrated in a successful way to achieve greater awareness.Method/Material: We have made a qualitative approach by conducting three in depth interviews with the company Bluetooth SIG?s marketing director Anders Edlund.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.