Sök:

Sökresultat:

1194 Uppsatser om Electric efficient - Sida 16 av 80

Separationsångest hos hundar : etiologi och möjliga behandlingsprotokoll

Behavioral problems are one of the leading reasons for re-homing and euthanasia in dogs. It is estimated that between 40 ? 87 % of dogs suffer from some sort of behavioural problem, making it an important animal welfare issue. Separation anxiety is one of the most common behavior problems encountered in dogs after problems related to aggression. This thesis is aimed at examining the etiology behind separation anxiety related behavior in dogs based on existing literature as well as comparing and evaluating the efficiency on suggested treatment protocols.

Alternativ till fiskbaserat foder till karnivora fiskar

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

Private Label-tillverkning : Faktorer som ligger till grund för att leverantörer på den svenska marknaden tillverkar private label

Background: In the past 10 years private label has increased significantly in the Swedish grocery market. This is an important strategic event, which is a great challenge to suppliers as it causes stiff competition. To handle this situation an increasing number of suppliers have to make the decision whether to produce private label or not.Purpose: The purpose of this study is to find and analyse factors that influence suppliers in the Swedish grocery market to produce private label. On this basis we intend to confirm or develop existing theories within the field of study.Research method: The study has a qualitative approach where empirical data has been gathered through interviews with suppliers and retailers in the Swedish grocery market.Results: This study has identified factors that underlie suppliers? decision to produce private label.

Från IAS 39 till IFRS 9 : En förenklad och förbättrad standard?

Saab är ett varumärke som delas av två olika företag, försvars- och säkerhetskoncernen SaabAB och personbilstillverkaren Saab Automobile, idag ägt av NEVS, National Electric VehicleSweden AB. Här finns en potentiell problematik då två separata företag delar sammavarumärkesnamn och kan ha olika strategier för hur varumärkesarbetet bör fortgå. Syftet meduppsatsen är att beskriva hur varumärket Saab uppfattas idag vilket har undersökts genomfokusgrupper och en enkätstudie. Studien utgår från konsumenters associationer och resultatetvisar att Svenskt Tradition utgör en viktig del av varumärkesbilden. Överlag har Saab en bred,homogen och positiv varumärkesbild där varumärket Saab representerar båda de bolag somdelar varumärkesnamnet.

Förstudie för kvalitetssäkringav glidande förband vid Hissmoforsvattenkraftsstation : -Specifikt för aggregat G6 och G7

Jämtkraft AB which is a power production company in Sweden has bought two newhydro power units to their station in Hissmofors. The two new generators are using aconcept with sliding stator feet to handle the thermal expansion.The concept with sliding stator feet on hydro electric generators has not beenworking satisfactory on many hydro power stations in Sweden and has caused a lot ofcosts due to long downtimes.The new station in Hissmofors is very important for Jämtkraft AB, and therefore theywant to know how to make sure that the sliding stator feet are working as theyshould. According to theories and a simplified model of the generator the stator feetdisplacement should be around 1 -1,6 mm.The generators are delivered with a surveillance system that will measure thedisplacement of the sliding stator feet. The signal from the system isn?t accessible forJämtkraft AB but it will alarm when the sliding stator feet are malfunctioning.To secure the function of the sliding feet a logger for the surveillance system or adifferent measurement system must be used; if both systems are used Jämtkraft cansecure the function of the surveillance system..

Ett re(el)lt hot? Om elprisets betydelse för investeringar inom basindustrin

The aim of this thesis is to investigate the correlation between the price of electric power and investments within the Swedish basic industry. Using regression analysis, the authors test for correlation between the electricity prices and the basic industry, defined as the pulp and paper industry, the mining industry, the steel and metal industry and the basic chemical industry. Moreover, five variables found in the literature on investment decisions are being used as a means of comparison. The results suggest that the electricity price affects the investment decisions within the basic chemical industry as well as the steel and metal industry. On a more abstract level, this thesis contributes to the understanding of one of the properties of the Swedish GDP..

Marketing and Branding a Nation : tillämpningen av ambassader som plattform för att stärka Sverige som varumärke

Problem: The authors have, during the process of development of this thesis, tried to create an understanding of how a number of organizations, all working with different approaches around the ?brand Sweden?, perceive the efficiency and benefits of using extended concept around embassies as a tool in their strategic work. The embassies in question have an evolved concept in the sense that they don not only hold a traditional political and legal role. The problem facing us authors was the issue whether theses embassies are efficient arenas to coordinate the forces and resources of the organizations concerned, in the mission to enhance the visibility and awareness of Sweden abroad.Purpose: The purpose is to describe the strategic work with marketing Sweden to be able to look in to whether the evolved concept behind the embassies in question are used as a tool in within the work of the organizations. We wish to research this to be able to evaluate if this arena is perceived as efficient for the organizations concerned.Method: In order to get a background to which one establish and communicate a nations brand the authors have studied literature within the subject.

En Modell av SOA för Agila Organisationer

In a dynamic and unpredictable reality, either rigid structures or silo architectures areappropriate ways to organize an agile organization. This thesis enlightens these relationsbetween Service Oriented Architecture (SOA) and an organization who acts in a varied andconstantly changing business environment. In other words, this thesis enlightens the question:?How suitable is SOA to organize the enterprise who will meet a constantly changing andheterogenic business environment?.The thesis presents a model where an efficient organization must be agile to be able to actquickly in the business environments with constantly changing desires, needs, expectations,desires etc. According to the same model a Service Oriented Architecture organizes theenterprise elements such as processes, resources, competences, responsibilities, informationsystems etc.

Statistisk analys av partiella urladdningar

This thesis concerns partial discharges in stator windings and the possibility of analyzing data using statistical methods. Partial discharges, or PD, are a physical phenomenon in which discharges occur locally due to large electric fields. PD can occur in or adjacent to the insulation of stator windings and causes breakdown of the insulating materials. PD measurement can provide an idea of how widespread the PD activity is. A technique to measure and analyze PD that has become very popular over the last few decades is phase resolved PD patterns.

Sputtring av Ti-Si-C-Ag beläggningar från sammansatta sputterkällor

Idag används guld som kontaktmaterial på elektriska kontakter för lågströmstillämpningar. Guldhar emellertid låg nötningsbeständighet, är dyrt och miljömässigt påfrestande att utvinna. Ettalternativt kontaktmaterial till guld är nanokomposit Ti-Si-C-Ag belagt medlikströmsmagnetronsputtring. Nanokomposit Ti-Si-C-Ag har hittills belagts med sammansatt Ti-Si-C sputterkälla och separat silverkälla.I detta arbete har filmer belagts från tre olika sammansatta Ti-Si-C-Ag-källor med tre olikakolhalter. Filmerna har belagts i två olika beläggningssystem: Ett konventionellt batchladdat ochett sekventiellt med sluss.Filmernas fas- och ämnessammansättning har studerats med XRD och EDX.

Hållbar utveckling i svensk planeringspraktik : en diskussion kring förtätning och andra ambitioner

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

Effektivare traktordemonstrationer : femtio lantbruksföretag svarar

The background to this paper is the fact that many products are demonstrated to show the consumer value of the product. This is generally the fact when it comes to agricultural products, such as tractors. The growing number of models makes this even more import for the retailer to perform a demonstration that really catches the interest of a prospect customer. One problem is that these demonstrations are expensive and many small retailers have difficulties to afford demonstrations of every model. Together with Åhmans Traktorcentrum AB a market investigation was conducted. The company has its primary sales area in the region of Östergötland and north part of Småland. Åhmans Traktorcentrum AB is a John Deere dealer.

Det norska energideklarationssystemets konsekvenser för äldre byggnaders karaktärsbärande värden

Roughly 130 000 dwellings have been officially registered since Norway as of summer 2009 passed their bill ?Energimerkeforskriften? on energy performance certificates in buildings. The main objective is to decrease the total amount of national energy consumption by producing a methodology of calculation of the integrated energy performance of buildings as well as proposing cost effective measures to lower each building?s energy consumption. As the measures should not contravene nor be incompatible with the intended quality and character of the building, the ?Energimerkeforskriften? exempts buildings that due to their historical and cultural values are protected cultural heritage legislation. The current system offers a couple of professional certification alternatives, but when two online semi-automatic methods developed specifically for non-professionals are by far the most used, and since the methods of calculation primarily have focused on modern building materials and construction, the rest of the historical building stock stands literally unprotected by incorrect performance certificates and high-risk energy efficient measures. The objective of this thesis is to identify if the current Norwegian energy certificate system poses a threat to older buildings.

Elektromagnetisk skärmning genom mekanisk omkonstruktion

This is a master degree thesis at Royal Institute of Technology (KTH) betweenÅngpanneföreningen and Programma. KTH is the examiner, Programma is the client andÅngpanneföreningen is mentor for this project.Programma has a product called TM1800 that has problems with EMC; the problem is thatthis product does only pass the CE-check with a small safety margin. This problem can besolved by reducing the radiation from the electric components in the product or by reducing offix base frame. In this degree thesis the focus is only on mechanical redesign.The main problems right now depends on the long distance between the screws, there is anisolating layer on most of the parts and the forces between the joints are too small. The mainfocus is to solve these three problems.The best solutions are when the whole base frame is more or less redesigned instead of onlyredesigning some of the connection points.

Analys samt förslag till effektivsering av patientflödet vid en vårdcentral

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

<- Föregående sida 16 Nästa sida ->