ABSTRACTBackgroundWhen faced with an unexpected cardiac arrest the ambulance nurse is in responsible for taking advanced actions to create a clear airway. Two accepted methods for this is endotracheal intubation and application of laryngeal mask.AimThe purpose of this study was to examine the use of endotracheal intubation compared to application of the laryngeal mask in unexpected cardiac arrest.MethodLiterature study with quantitative approach. A systematic search of 21 articles comparing the laryngeal mask with the endotracheal intubation has been made using Pub-Med and CINAHL. A quality review according to Forsberg and Wengström has been made.ResultsLaryngeal mask had a higher rate of successful applications compared with endotracheal intubation. Time for applying the laryngeal mask was shorter in seven out of ten of the studied articles.

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.

During the migration season in 2013 a study on spawning migrating salmon and the effect of water flow on the behavior was conducted of the salmon at the Forshaga hydropower station in the River Klarälven. The River Klarälven with its nine hydropower plants on the Swedish side, constituting migration obstacles for the migrating salmon. Fortum Generation AB has together with the County Administrative Board restored a salmon trap at the lowermost hydropower station in Forshaga, aiming at making it possible for the salmon to swim into the trap, and thereafter be transported by truck past the power plants and then continue their journey to the spawning grounds on their own. Unfortunately, it is believed that the trap does not work as well as it should. In this study, I focused on salmon position in relation to water flow and if the number of salmon that swam into the fish trap differed between salmon with previous experience of the trap (experienced) and salmon without experience (unexperienced).

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Yesterdays common fertilizing strategy was to apply phosphor (P) and potassium (K) in thefall a few times in the crop rotation. In the spring only nitrogen (N) was applied. Recent trialsand studies has shown that this strategy, N+P/PK, is ineffective compared with the systemwhere NPK is spread every year in the spring. The strategy with annual NPK-fertilizer in thespring has proven to be better for the crop, the environment and the farmers economy.In the NPK-system the crop responds with higher yields and better quality, especially in thespring cereals. This is mainly because of an interaction between the different nutrients in thefertilizer.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

Glycerol is essential for the lipid metabolism of both plants and animals. Glycerol is formed in the rumen by hydrolysis of lipids from the feed. Glycerol is also a by-product from the production of biodiesel from rapeseed oil and other fat sources. Glycerol might be used as a dietary glucose precursor for dairy cows in similar ways as propylene glycol. Due to increased production of biodiesel more glycerol has been available to a lower price.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Fertilitetsegenskaper har ofta låga arvbarheter och selektion baserat på fenotyp är ofta ineffektiv och långsam. För att förbättra fertilitetsegenskaper som ovulationsmängd och kullstorlek hos får är det effektivast att selektera avelsdjur utefter deras genotyp. Olika mutationer i gener tillhörande transforming growth factor-? (TGF?) superfamiljen har visat sig påverka ovulationsmängd och kullstorlek hos får. Dessa gener är BMPR-1B, BMP15 och GDF9.

Background: Oil is the most dominating source of energy of today, it constitutes for more than 40 per cent of the worlds total energy consumption. This together with the fact that stock in oil companies has soared on the stock exchanges around the world makes oil a very interesting topic to write within. In order to gain knowledge in how to value oil companies, the authors will collect information from theory and through a questionnaire. By applying the information gathered to three companies listed on the Stockholm Stock Exchange the authors will reach an objective picture of valuation of oil companies.Purpose: To investigate how shares of stock are valuated in the oil exploring and producing industry, and what specific measures and metrics that are used in the valuation of stocks in Exploring and Producing (E&P) companies.Method: By using a qualitative approach for this thesis, the authors will investigate how the valuation of oil companies works and what measures that should be applied. The authors will use a part descriptive and part explorative study.

More efficient energy consumption is essential to secure a sustainable future, not least within the building and real estate sector which answers for approximately 40 % of the EU countries total energy consumption. One part of EU: s work to reduce the energy consumption is the directive on energy performance of buildings which among other things have lead to stricter demands on energy performance in new and renovated buildings.One of the difficulties with making buildings more energy effective is that it often demands big investments and although it results in lower operating costs the extent of these savings and therefore also the repayment time can be difficult to decide beforehand. To make it interesting for property owners and also tenants to invest in energy efficient buildings powerful incentives are needed. Favorable loans to energy efficiency projects are one example of governmental instruments that have been tested in other European countries with good results.Reduced operating costs appear to be the main incentive for property owners to make their buildings more energy efficient. The best result of an energy efficiency project is usually achieved by cooperation between property owners and tenants but in order to make that interesting it is important that both parts can profit from the savings.

ABSTRACTToday's modern technological society is constantly evolving and house planning is one area that is constantly creating new technical solutions. By looking back at selected architectural eras during the 1900?s, the idea is to study and analyse three building structures in Gothenburg with a focus on quality and content in the urban space.In order to provide a background for the three selected areas, their history has been studied. The main question for the research is: how do different building structures affect the content and qualities in the urban space?The areas have been selected to represent three typical epochs in Swedish building history.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.