Finnhamn is a group of islands that are located in the middle north part of Stockholm?s archipelagos. On the main island Stora Jolpan there is a camp called Sommargården, which consists of eleven different buildings in various sizes. The assignment given by the Archipelago foundation (Skärgårdsstiftelsen) is to analyze if it?s benefited to replace Sommargårdens current heating system that consists of electricity radiators, with a more energy efficient heating system. This research is done with help of the literature review and a visit to Finnhamn in order to map Sommargården?s current state and its energy usage.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

Schmallenberg virus (SBV) is a novel arthropod-borne orthobunyavirus emerging in Europe in 2011 to 2012. Acute SBV infection causes diarrhoea, fever and reduced milk production in dairy cattle, but it is mainly the reproductive disorders (abortions, malformed foetuses and stillborn animals) in ruminants that have caused substantial economical losses. The prevalence of the virus outside of Europe is poorly investigated. SBV or SBV-like antibodies were detected in Mozambique in 2013, which raised interest for a similar study in Tanzania. In this study in Tanzania, blood samples were collected from 478 sheep and goats from 39 herds in 15 different villages in three districts, covering areas in the north, south and east of Tanzania. The epidemiology of the virus was investigated by tracing antibodies by ELISA and mapping of the virus by PCR was started.

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.

Transboundary protected areas are a fairly recent concept that have been increasing in popularity and are increasingly being integrated into large international organizations? environmental policy making. This essay examines the phenomena through the cooperation between two national parks, Parc National des Pyrénées in France and Parque Nacional Ordesa Monte Perdido in Spain. The theoretical framework used in this essay is based upon border theory, focusing on the different factors that influence the behavior of the border dweller and how the different social conceptions of nature influence the way it is managed. The results in this study result from researching published and private documents from the national parks and interviews carried out with staff from the park administrations from both countries.

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

Background: There has been a movement of power towards customers in most markets which puts higher demands upon the customer orientation of organizations to survive competition. In general the opinion is that satisfied customers also are profitable for the organization. Even though a consciousness exists about this connections importance for the organization there exists no prominent economical theory showing how a organization should work with customer adaptation and how management should be shaped for success in this area. In the field of competitive sports clubs a similar trend is discernible since the field is increasingly commercialized.Purpose: The purpose of this study is to adapt The Balanced Scorecard as a model to the demands on management that customer orientation causes and to use the knowledge created during the study to show how customer orientation in a competitive sports club could look.Realization: The study first takes the form of a literature study which emerges into a theoretic development. Above that a case study of Linköpings Hockey Club has been accomplished so that knowledge created from the literature study could be used on competitive sports clubs.

We have chosen to focus on the meaning of long-term income support dependency regarding health, goal setting and motivation for the recipient of economical aid. We have chosen to use semi structurized interviews to achieve our goal of reaching the clients experience of long-term income support dependency. The study consists of interviews of six clients whose answers have been analyzed through appliance of Kielhofner´s Model of human occupation, Scheff´s Shame in self and society.   Our results show regarding, 1) the factor health that long-term income support dependency may elevate the risk of illness and less experienced options of possibilities to act. 2) regarding the factor goal setting, that goals may be inefficiently used during social work with long-term income support dependent clients and may result in a disorganized relationship between client and social worker in the sense of making the parties pull in opposite direction. 3) regarding the factor motivation, that long-term income support dependency and the living with the emotion of shame elevates the risk of maintaining a negative image of oneself that limits the willpower to assimilate new knowledge and/or skills.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.

The aim of this masters thesis is to examine what political, social and ideological reasons that were the base for the establishment of the Swedish temperance movement. Which judgements within this movement that resulted in the decision to establish publishing firms, how these publishing businesses were organised and what function they had in the literary circuit. The questions are: What principal political, social, economical and ideological reasons were the bases for the establishment of the Swedish temperance movement? How has their need for publishing firms arisen? Which were the publishing firms and who were the publishers? What ideas, purposes, experiences, values and judgements led to the establishment of publishing firms? In the first part of the theory I have used the historical materialism of Karl Marx; in the second part the theory of middle class publicity by Jürgen Habermas; and in the third part I have made a presentation of the literary circuit and how it works according to Marx and Habermas. The method used is an analysis of ideas and ideologies in literature and documents.

The objective of this paper is to estimate monetary and non-monetary costs for the huntercaused by deer-vehicle collisions in Sweden. These costs include losses in hunting value as wellas time and money efforts related to the handling of wildlife casualties. The calculations arebased on available statistics from 2004 on deer-vehicle collisions involving moose, deer, roedeerand wild boar and on telephone interviews with hunters involved in the tracking of injuredanimals. Altogether, the annual loss in hunting value for moose was assessed to approximately30 million SEK based on the 2004 accident statistics. For roe-deer and fallow deer, thecorresponding figure was approximately 56 million SEK and 1.2 million SEK, while wild boaraccounted for 1.3 million SEK, respectively.

The world gets smaller and smaller and goods, services, people and information are nowadays more and more able to freely cross borders. Half of the Swedish GNP consists of export and almost 70 % of that amount is goods. Because of today?s increasing globalization the Swedish companies are now faced with both new opportunities and threats. Companies with goods which are manufactured in Sweden gets challenged by increased competition from cheap goods produced in other countries and companies can no longer afford to entirely focus on the domestic market.