This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

This study focuses on why people not longer want to be a part of a religious communion they have earlier been a part of. To examine this I have made seven interviews with people who have left their previous communions. Together with the methodological and theoretical discussions on discourse analysis, Richard Jenkins discussions on identity and theories concerning the post-modern society, I have made an analysis on how these people consider their previous communions and its members. They refer i.e. to the social control, the ?closed? culture and the non-questioning-culture that constitute the communions and its techniques.

The development of applications for mobile devices has exploded in recent times. This has also led to the introduction of several new mobile operating systems. To streamline application development for multiple platforms, techniques have been developed to be able to reuse the same application regardless of the operating system. If the same application can be used on multiple platforms it will save both a lot of time and money. Today there are three types of techniques to develop an application; web, hybrid and native application, where the latter is specific to the operating system it has been developed to.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

The purpose of this thesis is to investigate how theoretical investment appraisal techniques are applied in an investment driven company, regarding investments in fixed assets. The aim is also to investigate on what grounds the choices of techniques are justified, and what consequences these choices have on the overall investment appraisal. The study is designed as a case study of Divisionen, a production unit of a market leading company in Sweden, which is kept anonymous in this thesis. The empirical data consists of interviews with company employees and internal documents, including decision support for seven approved investment projects. The interviewees were chosen based on their role in the investment decision making process.

My purpose with this thesis has been to find out how to choreograph a fight sequence in ananimated movie. With the help of professional stuntmen and dancers, I have tried to findmethods and techniques used on stage and in live-action film and apply those to animatedfilms. To successfully identify the techniques used, I conducted a number of interviews andanalyzed literature that deals with the subject of fight choreography. By the analysis of themethods provided by the choreographers and selected parts of the literature, I have compiled anumber of steps I recommend 3D animators should to take in their efforts to create their ownfight choreography..

In the history of scientific visualization techniques there is a lack of social science practices and methodologies. The advent of modern computer graphics brought the use of visualizations into a whole new era, but even though the tools by which such modern visualizations are created become easier to access and use, the lack of social science researchers harvesting the benefits of such tools still remain. This ease of use, increase in power and accessibility plus the ever growing need within the natural sciences to augment the human senses has further complicated the relationship between scientific methodologies, validity, reliability and the use of visualization techniques. This relationship must be explored, demystified and understood in order to fully grasp the impact of visualization practices when incorporated into any given scientific method. Within the social sciences there is one example of a tradition that has since its conception carried within it a graphical notion and a visualization practice.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

My purpose with this thesis has been to find out how to choreograph a fight sequence in ananimated movie. With the help of professional stuntmen and dancers, I have tried to findmethods and techniques used on stage and in live-action film and apply those to animatedfilms. To successfully identify the techniques used, I conducted a number of interviews andanalyzed literature that deals with the subject of fight choreography. By the analysis of themethods provided by the choreographers and selected parts of the literature, I have compiled anumber of steps I recommend 3D animators should to take in their efforts to create their ownfight choreography..

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.

The Swedish cooperative Lantmännen Ekonomiska Förening has initiated a project labelled "Operation Blåljus" that includes an extensive program for closing down elevators. The number of elevators will be reduced from 92 to approximately 15 after harvest of 2007. The objective of Blåljus is to increase the price of grain with 10 öre/kg. A project has been initiated at the Lantmännen Grain division where the purpose is to provide the farmers with support in their decisions and practical advice how they can load a 35 ton grain truck on 30 minutes. The result from the project will serve as a support system to the farmer in his ambition to achieve cost efficient systems to load a truck with grain on the farm.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

The varieties of paint are today very big, but many of the more popular paints are less than environmental friendly. The uses of fossilized fuel in paints are common because these paints dry fast and are color true. It would be beneficial for the environment if more renewable source were used to produce paint. Linseed oil is an old base for oil paints. It is renewable and easily procured.

My purpose with this thesis has been to find out how to choreograph a fight sequence in ananimated movie. With the help of professional stuntmen and dancers, I have tried to findmethods and techniques used on stage and in live-action film and apply those to animatedfilms. To successfully identify the techniques used, I conducted a number of interviews andanalyzed literature that deals with the subject of fight choreography. By the analysis of themethods provided by the choreographers and selected parts of the literature, I have compiled anumber of steps I recommend 3D animators should to take in their efforts to create their ownfight choreography..

This Independent work is about testing a method to create meaningful learning and a deeper comprehension in matter of basic hairdressing techniques. I got the idea for this method by reading literature related to my education to become a teacher for hairdressers, the new schoolreform and from my own experience of a teaching method that I saw an opportunity to develope. My teaching method was based on first teaching the pupils the basic techniques, and then give them an assignment were they were to find out their own final result by using a picture for inspiration. They were given an assignment description with certain frames but with freedom of choice how to get to their own final result. By making a job description and a headdrawing to show how the work should be done, and during the process try different ways to achieve the best result, my idea was that a deeper understanding and a feeling of meaningfulness would appear.The result shows that the pupils by freedom within frames experienced meaningful learning and thereby deeper understanding when it comes to basic hairdressing techniques.