At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

This study was a final thesis, for the bachelor program in civil engineering at theUniversity of Uppsala, which was made on behalf of Riksbyggen in Uppsala. Acomparative study of two stain renovation methods; tradition pipe replacement andrelining was done with an environmental perspective. A simplified life cycleassessment (LCA) was done according to the International Organization ofStandardization (ISO) with the LCA tool Eco-indicator 99, in order to be estimate theimpact on the environment. LCA is a method that follows a product or a system?from the cradle to the grave?, which means that all the environmental impact over alifetime is considered.The work was executed by using a stairway with nine apartments in a house called?Uppsala Hus 9? as a reference object, which was provided by Riksbyggen.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

Emhart Glass is the world?s leading manufacturer of equipment, controls and components to the glass container industry. The goal of this project has been to identify improvements and propose cost saving solutions when moving one of Emhart Glass work cells in Sundsvall. The changes shall result in improved work environment and increased product quality. The method contains value stream mapping, concept selection and P-FMEA and complies with Emhart Glass goal to become a more Lean focused business.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

Kurs: Examensarbete i logistik för Civilekonomprogramet, 4FE05E, VT14Författare: Christian Sjöström och Joel Cederberg Handledare: Linnéuniversitetet: Åsa Gustavsson                       VCE i Braås: Cecilia Ekstrand och Carl Sigfridsson Examinator: Helena Forslund Titel: En studie om kvalitetsbrister samt förslag till förbättring av godshanteringsprocessen på VCE i Braås Bakgrund: Företag har skiftat fokus från priskonkurrens till fokus på kvalitet och leveransförmåga. Kvalitet är en nyckelfaktor för att kunna tillfredsställa kunden, skapa lönsamhet i företaget och skapa ekonomisk tillväxt. Om processer som finns för att tillfredställa kunden innehåller kvalitetsbrister orsakar det problem för hela företaget. Det är av vikt att effektivisera processerna som finns i företag genom verktyg som processkartläggning för att motverka kvalitetsbristerna. Syfte: Syftet med uppsatsen är att, genom en kartläggning av godshanteringsprocessen från godsregistreringen till intern kund, identifiera kvalitetsbrister samt orsaker till dessa i processen samt föreslå åtgärder för minimering av dessa kvalitetsbrister. Metod: Studien är deduktiv och följer ett positivistiskt synsätt och empiri har samlats in genom en kvalitativ fallstudie där observationer, ostrukturerade och semi-strukturerade intervjuer har använts. Den teoretiska datainsamlingen har gjorts genom databaser och litteratur från Linnéuniversitetes universitetsbibliotek.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

AbstractDate              2009-06-07Level             Master thesis in Information Technology and Business Administration, 15 hp, EIK024Authors        Anna Karlsson, akn05009@student.mdh.se                      Lena-Maria Lindström, llm05002@student.mdh.seTutor            Peter EkmanTitle              IT Governance with an IT investment focusKeywords     IT Governance, IT investments, IT decisions Problem       To control and manage IT and IT functions in the organization has been a big challenge for many businesses for a long time. In order to make the management of IT more efficient IT Governance is needed. If the organization is going to be successful IT Governance is necessary and this type of governance enables a more effective use of IT that supports the business and its operations. The problem questions for this thesis are: How is the company?s IT Governance built up? How are decisions regarding the company?s IT investments taken? How is the connection between the company?s IT investments and the company?s IT Governance?Purpose        The purpose of this thesis is to describe and analyze how a company?s IT Governance is built up and how the company uses IT Governance to reach the desired results from the IT investments.Method        The thesis is a qualitative study.

Nu för tiden jobbar allt fler företag med team. Det krävs att det finns en bra strategi, struktur och rätt personer för att teamet ska bli så innovativt som möjligt. Desto större och mer expanderade företagen är över världen krävs det även att människor från olika kulturer och länder samarbetar mot att föra företaget framåt. Något som kan skapa problem i och med olikheterna.Forskning från West et al. (2006) och Paulus et al.

Uppdraget har handlat om att kartlägga en ekonomisk modell för nyutvecklings- och uppgraderingsinvesteringar. Modellen är en investeringskalkyl baserat på olika tidsperioder vilka är projekt, produktion och eftermarknad. Lönsamhetsmodellen, som den kallas i examensarbetet, jämför egentillverkade och inköpta komponenter (ex växellåda). I modellen finns några viktiga parametrar som behöver verifieras. Reservdelsförsäljning är en sådan.