Sweden is a country that has made some progress in developing energy efficient solutions. The problem in Sweden is that many houses and apartment buildings are old and have inefficient ventilation- and heating systems. This energy is lost when systems are inefficient, which then results in huge economic costs. Luckily, more and more people are becoming aware of this, which means that Sweden is on track to become even better within energy efficiency.Energy use for the housing- and service sector amounts to 166 TWh of total use at 616 TWh. Without distribution and conversion losses, these figures show that the housing- and service sector accounts for almost 40 % of the country's total energy consumption.

The community Vessigebro, in Falkenberg and its surrounding areas housing one percent of all dairy cattle and two percent of all pigs in Sweden. This means that there is a large amount of manure as a basis for producing biogas in the area. A number of farmers have therefore formed a cooperative named Vessigebro biogas and started the project Green Vessigebro, with the goal of creating the conditions for a more profitable and more sustainable agriculture production.The study deals with the conditions and sale opportunities of the feasibility study Green Vessigebro. The study has looked at the work that was previously carried out for the biogas that could be produced on the farms in Vessigebro, The main pipeline for natural gas on the Swedish west coast and its operators, the Swedish Competition Act , Electricity Act , Natural Gas Act, the District Heating Act , Sustainability Act , previously proposed measures, municipality interest in biogas from Vessigebro , possible collaborations, possible sale opportunities and perform calculations with data from the municipality Ljungby for a suggested transportation of biogas between Vessigebro and Ljungby.The study shows that there are several interesting sale opportunities for biogas from Vessigebro. The production and use of biogas in Sweden is increasing and the trend seems set to continue.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

This study was an assignment for the company Holmen which is located in the region of Örnsköldsvik, Sweden. The study was focusing on the responsibilities of a forestry planner during the planning season. The study was investigating about how much time the planner spent in the office, in the car and out in the forest. Any other issues that would cause delays were also identified. To be more effective and to increase the number of objects to a district bank, a better preparation in the planning stage (for thinning?s or clear cuts) is needed as well as faster transition on to the next area.

This project was a request of Norrbodal´s Forestry Board, Västra Götaland. It was performed as a qualitative interview analysis of private forest owner?s deficient motivation regarding pre-commercial thinning. The purpose of the project is to investigate what the Forestry Board can do to motivate private forest owners to do more pre-commercial thinning. The results build upon 16 qualitative phone interviews with forest owners that have their forest within the district of Norrbodal. The owners are divided into two groups, the one who have performed the pre-commercial thinning and the one that has possible pre-commercial thinning needs on their properties according to the pre-commercial thinning analysis ,which is the result of a satellite analysis.

The aim of this Bachelor thesis is to analyse how the libraries in the district of Tranemo was affected by the fusion of municipalities between 1952 and 1974, when 13 municipalities was merged into one. My major findings are that one of the libraries became the main library and libraries of the other villages became branch libraries. The main library could increase its quality by employ an educated librarian and move to a place that was more adapted to its purpose. The library loans increased. This course of events seems to be common for what happened to Swedish libraries when there were a lot of fusions of municipalities these years..

Vattenfall Heat AB is a district heat provider in Drefviken, but has yet to establish any cooling systems in this area. This thesis examines the potential client base within the area today and over the coming 20 years. The feasibility of the most common cooling technologies is evaluated and results show a total potential for an installed capacity of 30 MW providing 50 GWh of cooling per year. One of the examined areas shows good prospect for heat driven absorption chillers during the summer months when the heat load is limited..

This essay aims to higlight the perception of achievement among politicians and directors in one of Malmö´s district. The questions higlight the success factors for goal attainment and how to legitimize goals. The success factors that are important are clarity regarding both the organisation, leadership and communication. To achieve that a pioneering leader who can motivate and establish their employees is needed. It is also important to create realistic goals to achieve legitimated goals..

The culture center studied has gone from being organized by enthusiasts and ideals, to being institutionalized with a educational association responsible for the management. The questions discussed are ? how this change affects the active people in the house and what consequences these changes make for the institution of the house and for the regular management..

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

We started out the study with a preconception of culture as something that creates difference between groups of people, which had been verified by our prior research. We also had a sense of culture as a polysemous term. Our assumption is also that there is an opinion within social work practice that Swedish social workers are faced with a cultural barrier when encountering immigrant clients.In this study our aim is to examine constructions of the terms cultural competence and culture. Constructions of the terms ethnicity and ethnic diversity are also observed, although the main reason for this is to show what relation these terms have to the terms cultural competence and culture, and how they may give each other meaning, according to the theory of social construction. In addition to constructions, we also aim to bring out discourses around the terms, upon which we will create a discussion about power and dominance informed by post-colonial theory and critical discourse analysis (CDA).

The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

At Sandvik Materials Technology, Argon gas is used as furnace atmosphere when heattreating hot rolled wire. Upon heating chromium steel wire, a rich oxidelayer forms on the wire surface. The abstract of this masters thesis is to enhance the understanding of the constitution of the oxidelayers and the influence of the furnace atmosphere. This will be achieved by performing a number of annealing experiments on laboratory level. Also, the aim is to understand the chemical reactions and physical mecanisms controlling the pickling process.

In this final thesis a rough description of aluminium extrusion is made, the importance of temperature of both the raw material and the extruded profile for a good profile quality. The difficulty in controlling these temperatures are discussed and attempts to increase the control are described. The attempts are basically made by controlling the furnace that is heating the raw material. This is done in a manner that the raw material reaches its final temperature shortly before it is extruded. An IR-camera at the press can be used for profile temperature measurements.