Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

We live in a stressful world and a demanding society where the ability to quickly adapt is one of the most important and most difficult challenges of today. A fairly new phenomenon called intranets has evolved to meet this challenge, however many examples of corporative intranets are stories about failures and systems with poor usability. This study focuses on how the user oriented approach to systems design affected upon a system development process of an Intranet, solely developed within a company, and how it impacts on the intranets popularity among the employees in the company. The study starts not from the literature but from a survey, which is based upon the Delphi method. Which results were used for further in-depth research about the subject, by interviewing three representatives from the company.

This report is the result of a thesis work in Integrated Product Development, regarding hygienic features in dishwashers and especially disinfection by the use of steam.The thesis is performed at Electrolux Primary Development Dishcare in Stockholm and in collaboration with the Department of Machine Design at the Royal Institute of Technology.The targets of the thesis are to prove the advantages of a technology suitable to implement as a hygienic feature inside a dishwasher and to realize a functional prototype of a differentiated hygienic feature that does not exist on the market today.The process followed to perform the thesis is the process defined for Electrolux Primary Development.The technology chosen for development is disinfection by heating the water on the surface of the dishware, by the use of steam.A number of tests on how steam behaves when injected into the dishwasher tub have been performed, providing the results that have been taken in consideration when designing the prototype.The prototype consists of a pipe system provided with nozzles to eject the steam into the upper parts of the dishwasher. Tests of the final prototype show that thermal disinfection of water in a dedicated area of the tub can be reached within 9 minutes. The operation requires 0,17 liters of water and consumes 0.2kWh..

AbstractMy purpose of the investigation is to enter deeply into the knowledge of the Individual plan of the development and to examine how teachers, pupils and parents look at the Individual plan of the development and the purpose of the Individual plan of the development in school. My question of the main problem in this investigation was to examine the expectation on the Individual plan of the development from teachers, pupils and parents and if the Individual plan of the development has been influence the cooperation of parents and the influence of the pupils also how and if teachers, pupils and parents apprehend some kinds of changes.The review of the literature begin with a closer study about our document of control, witch are the curriculum of the compulsory school (Lpo 94), The National Agency for Education General Advice for the Individual plan of the development (2005), a study of the development of the cooperation of the parents and the influence of the pupils under the years of research about it.I have in my investigation used qualitative interview in different forms like the ordinary interview, interview on telephone and focussed group interview with teachers, pupils and parents. The result of my conclusion from the investigation is that the information and the knowledge of the Individual plan of the development are important to be able to increase the influence from the pupils and a different cooperation from the parents in the development of the school with the Individual plan of the development. My examination is small and not generalised but I believe that it still can represent the attitude of the Individual plan of the development. The consequence of the investigation shows that pupils and parents have vague idea of the Individual plan of the development.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

AbstractThe aim of the studie was to investigate if the Pediatric Early Warning Score system, PEWS, is an useful instrument on a children's inpatient ward, regarding the detecting of deterioration in children's vital signs. For this, a quantitative descriptive design with qualitative elements was used. Method: Study specific questionnaires were distributed to 86 persons (helpnurses, nurses and doctors). Of these, 36 answered and sent back the surveys. Results: Of 36 responses 25 felt experienced a faster detection of deterioration of vital signs in the child.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This report describes the development of a sample loader for my diploma work at Q-linea AB in Uppsala. The sample loader will replace the process of loading fluid samples into Q-linea?s instrument for biomolecule analysis. The earlier process was done by hand and was a time consuming and inefficient task.The work was initiated with a design phase where an overview of the system was created. The sample loader will be receiving text commands from a PC that coordinates all the subsystems like pumps and lasers on the analysis instrument.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

This master thesis examines the development of the two earlier independent IR protocols Z39.50 and SR (Search and Retrieve, ISO 10162/10163), now Z39.50/SR, from the beginning of the 80s to 1996 and their functionality in the client/server environment.Z39.50 applications in library systems will allow easy access to information regardless of platform or location. The use of Z39.50 will create a new user environment. Almost all the library systems of the market support the Z39.50 and surprisingly the use of it in Sweden lied on a very low leve! in 1996. This thesis was followed-up by an interview and a questioner among the Swedish Z39.50 users. They could see a huge potential of development concerning the future IR process.

The history of books and libraries in the Philippines starts after the arrival of the Spaniards in 1521. During the Spanish era, most of the libraries were established through the religious orders to support their own religious mission. The Americans came in the beginning of the 20th century and have had a decisive influence on the education system and the development of libraries in the Philippines. For the analysis, I have used the models of Michael H. Harris and Magnus Torstensson in their studies of library development.

Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.

The purpose of this work is to providing a general set of base classes for building simulators, for example a robot system. Instead of every time building a new simulator from the beginning, you get the already completed components from a library. The library should in that way act as a springboard for development.To do this work, there?s a lot of knowledge required in how a general robot system could look like. Therefore it was necessary to gather some information about robotics.

This thesis is closely related to the Dynamically Self-Configuring Automotive System(DySCAS) project. DySCAS is a middleware for electronics in an automotive system. Thethesis work has been performed in cooperation with ENEA. Parts of the demonstrationplatform Self configurable High Availability and Policy based platform for Embeddedsystem (SHAPE) developed for the DySCAS project by ENEA have been used in theimplementation phase of this master thesis.The goal of this thesis was to evaluate how the Meteor MW, an offspring of the DySCASmiddleware, should handle QoS and to design a Quality of Service Manager (QoSM) for theMeteor MW that fulfilled hard real-time requirements. The thesis also had the objectiveof analysing and identifying the requirements on such a QoSM from a QoS perspective.Specifically the requirements to guarantee real-time support for applications running onthe MW.

The demands for higher production yields and better quality materials from the forests are increasing globally. Tree breeding programs are directed to meet the future demands on forests. In order to capture the full benefits from the breeding programs, clonal propagation is necessary. For most conifer species, somatic embryogenesis (SE) is the only available option for large scale clonal propagation of Elite clonal material. For Norway spruce (Picea abies L.