The purpose of this thesis is to investigate the ways in which emotion regulation and mood affects risk taking when it comes to decision making competence. Emotion regulation is an essential part of the attachment process, the development of an autonomous self and functional stress coping systems. Research indicates that there is a relation between a distorted emotion regulation and some psychological disorders like depression, PTSD, anxiety disorders and borderline (or instable emotional personality disorder). There is a definite need to analyze the relation between emotion regulation and decision making competence since it is relatively unexplored. A digital questionnaire was distributed amongst the participants.

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

The question of the mandatory audits be or not be has been investigated thoroughly in recent years. Theresult is that the audit obligation in all likelihood will be voluntary for 96 percent of all of Sweden´slimited companies in the summer of 2010. The new draft law gives the accountant the opportunity towork both as an accountant and consultant. The investigation in this script works with the question"Which services the owner-managed companies, which in future not will be forced to audit, demandfrom an accounting firm in the suspension of the mandatory audit?" This will take the investigation outby a quantitative study through questionnaires distributed to 40 limited companies.

Alkoholberoende och missbruk är ett omfattande problem i såväl Sverige som i övriga delar av världen. Med tanke på de fysiska, psykiska och sociala konsekvenser som missbruket leder till för både missbrukaren, och människor i hans eller hennes omgivning, finns det all anledning att undersöka möjligheter för att åtgärda detta. Syftet med detta examensarbete är att kartlägga olika behandlingsmetoder och att med psykologiska teorier om mänskligt beteende som utgångspunkt komma fram till den behandling en alkoholberoende individ behöver. Resultaten visar på att såväl personlighetsfaktorer som det sociala sammanhang individen befinner sig i har betydelse för om han eller hon missbrukar alkohol eller inte. Den sociala miljön bidrar till stor del till en alkoholberoende individs identitet och beteende.

Quality Control is a term often used within production and is referring to managing processes so they produce capable products. Within Quality Control, process capability index is a common measure to oversee processes. Safety Region Plots were introduced to do this graphically. In Albing & Vännman (2010) the concept of Safety Region Plots is expanded to incorporate an elliptical shape. The method of Elliptical Safety Region Plots assumes a normally distributed data.

Byggbranschen är inne i en övergångsfas mellan 2D och 3D. BIM, som arbetsmetod, och 3D-modeller blir allt vanligare. I broprojekt är dock efterfrågan på dessa modeller låg. På WSP i Stockholm används 3D-modelleringprogrammet Tekla Structures i stor utsträckning på flera avdelningar. Önskemål finns om att utöka användningen av programmet även inom broprojektering.

The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.

Abstract The main purpose of this study was to investigate if and how the employees in elderly care experience stress and which underlying causes they understand to be important in their work situation. The purpose was also to investigate whether Karaseks and Theorells demands and control models could be used to explain the employees feelings of stress and to see in which categories the participants are in. Furthermore, the purpose was also to understand the participants work situation and to describe the factors and remedies the employees perceive to contribute to the stress levels at their workplace. 81 questionnaires were distributed at three different locations, two of which were in Ronneby and one in Örebro. 56 people answered the questionnaires. The result yielded that 80% of the participants felt stress during their working hours the last few years. The results are in agreement with the demands and control models which showed that people with high demands and low control experienced a higher degree of stress than people with lower demands and higher control, which corroborates the hypothesis 1.1..

The purpose of this degree project is to study if there is a intentional work with technology in the elementary school, preschool to fifth grade, in a municipality. The work will also study what conditions there are in the schools in order to work with technology. 95 questionnaires were distributed to the responsible teachers in all primary schools in the municipality, from preschool to fifth grade. The results of the survey show that more than half of the respondents do not consider themselves to work with technology in the school. The conditions, in order to work with the school subject technology in the municipality, are primarily external such as: material, facilities and the ability to divide students into smaller groups.

The intention of this qualitative study is to describe and analyse women's violence against men from the perspective of authorities and volunteer organisations. Data has been collected trough semi-structured interviews with six respondents stemming from the police, social services and a help organisation for men respectively. The data has been analysed using existing research and common theories about power, sex and gender. The study shows that IPV does not only contain physical violence, but also acts of psychological-, sexual-, economical-, material-, and latent violence as well as the fact that one act of violence almost never exists alone. It is shown that women more often use psychological abuse against their partner then men do and also that men tend to stay longer in an abusive relationship then women.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.

Reverse logistics is getting more and more attention both from companies and the public. It is an area with the possibility for companies to do good in the eyes of the public. This work focus on the return system of a one-way handling material called the loading ledge. The loading ledge is developed by IKEA as a substitute for the EUR-pallet in transports from suppliers with a long distance and even flow and in transports from suppliers with short distance and uneven flow. The loading ledge is made out of 100 % recyclable plastic.The purpose of this work is to find the most efficient set-up for recycling of loading ledges within IKEA on a European level from a transport and handling point of view considering aspects like cost, environment, time and, from an administrative point of view, user-friendliness.Who will the participants of the set-up be, where will they be located, which transports are needed and which income and costs does the set-up generate, are questions that will be answered.

The present study sought to examine the collaborative role of the student organization Here 4 U and the impact of this collaboration on the organization and its partners. As a point of departure a questionnaire was distributed to supervisors, principals and other cooperation partners of Here 4 U, the most prominent quantitative results of which were related to previous research, new institutional theory and empowerment theory. It turned out that partners interacting with Here 4 U felt that the collaboration was necessary and wanted to continue with it. The respondents to the questionnaire were asked to define the concept of collaboration. Factors emphasized by respondents included feeling of community, security, and common goals.

The aim of this study was to examine differences in the experience of intrinsic work-motivation and to examine changes depending on profession, where the purchasers experienced a higher level of individual demands and control than the production leaders. Another purpose was to see how the intrinsic motivation needs predicted mental well-being in the professions. The study was carried out using an internet survey that was distributed by e-mail, there were 98 participants. Two questionnaires were used; Basic Need at Work scale (W-BNS) measured intrinsic motivation and GHQ12 measured mental well-being. The result showed that the staff overall had high intrinsic motivation with highest scores on relatedness followed by competence and lastly autonomy.

The purpose of this thesis is to investigate the ways in which emotion regulation and mood affects risk taking when it comes to decision making competence. Emotion regulation is an essential part of the attachment process, the development of an autonomous self and functional stress coping systems. Research indicates that there is a relation between a distorted emotion regulation and some psychological disorders like depression, PTSD, anxiety disorders and borderline (or instable emotional personality disorder). There is a definite need to analyze the relation between emotion regulation and decision making competence since it is relatively unexplored. A digital questionnaire was distributed amongst the participants.