Sök:

Sökresultat:

1265 Uppsatser om Distributed components - Sida 7 av 85

Konstruktion av demonteringsrigg : För gängade hydraulikcylindrar.

Dione kullager AB is a company in Uppsala, which sell industrialmachinecomponents, transmissionsolutions and provides repair serviceof hydraulic components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

Omkonstruktion och arkitekturbyte av autopilot för obemannade farkoster

This thesis has been written at Linköping University for the company Instrument Control Sweden AB (ICS).ICS is a small company located in Linköping that develops software and hardware for Unmanned Aerial Vehicles, UAV. At present, ICS has a fully functional autopilot called EasyPilot but they want to reduce the autopilot?s size to make it more attractive.The purpose of this thesis was to investigate if it was possible to reduce the size of the autopilot and how, in that case, it would be done. It was also necessary to examine whether the old processors should be replaced by new ones and how hard it would be to convert the old software to these new processors.To succeed with the goals many of the old components had to be changed for new, smaller ones. Some less necessary parts were also completely removed.

Materialförsörjning från förråd till montering : Verktyg vid val av förråd för komponenter

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

Profilering av Södertörns Högskola : Studenternas inställning till lärosätets marknadskommunikation

Either if you are a company or a state owned organization, in our case Sodertorn University collage, it is very highly demanded and needed that there is a well-defined definition of the area you perform in. It is also highly recommended that you have an accurate and informal profile of the type of company you are and that you have an effective communication to your surroundings, so that they can perceive it the way the company wishes mediate the message. In this essay we have tried to explain the kind of profile Sodertorn University collage has, and how its current students perceive this profiling strategy.Sodertorn University collage profiles itself through three significant areas: the school claim themselves to be multicultural, multiscientific in an aspect when it comes to courses and programs, and as a school with an ambition to educate and form more critical thinking students. This has become Sodertorn University collages trademark and is quite significant for the school, something that we have examined in our survey among the current students. What we will examine in our essay will only be the two first mentioned components, multicultural and multiscientific programs and courses.We have also had the intention to do a comparison with an earlier essay from 1997 made by two economics students, and put our results in contrast to the earlier results since there were no previous research after this one.

Adaptive QoS Management in Dynamically Reconfigurable Real-Time Databases

During the last years the need for real-time database services has increased due to the growing number of data-intensive applications needing to enforce real-time constraints. The COMponent-based Embedded real-Time database (COMET) is a real-time database developed to meet these demands. COMET is developed using the AspeCtual COmponent-based Real-time system Development (ACCORD) design method, and consists of a number of components and aspects, which can be composed into a number of different configurations depending on system demands, e.g., Quality of Service (QoS) management can be used in unpredictable environments. In embedded systems with requirementson high up-time it may not be possible to temporarily shut down the system for reconfiguration. Instead it is desirable to enable dynamic reconfiguration of the system, exchanging components during run-time.

DFM för Lasersvetsning

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

Fyra röster om människan vid dopet : Fyra representanter från Svenska kyrkan och Pingstkyrkan om människosynen i doptraditionen

The purpose of this study was to investigate what view of humans that emerges when priests/reverends talk about man in relation to baptism. The study consists of qualitative interviews with four priests/reverends. There were two representatives from the church of Sweden, and two from the Pentecostal church. The aim and questions in the study focus on what view of humans that emerges. Will there be similarities and differences in the view of humans, and is it possible to refer the result to the respective church.

Effekter av urbanisering på grönalgen trädgröna i Linköpings stad med omnejd. : Biologiundervisning i närmiljön

Urbanization has for a long time been a threat to our biodiversity. Epiphytic organisms such as lichens have been negative affected by traffic pollution and the new urban environment surrounding their old habitat (van Her 2001). Another epiphytic organism is the green algae Desmococcus olivaceus. Unlike lichens the green algae is favoured by polluted areas. The aim of this study was to investigate if time in urban environments affected the cover of the green algae on old oaks.

Kundlojalitet : en studie om vilken påverkan de demografiska aspekterna har på kundens lojalitet mot sin bank.

In Sweden today almost all people are connected to a bank in some way. It can range from loans, savings, shares, etc. They have a current account where salaries, student aid etc. is paid. Due to the large selection of banks, it has become more important for banks to be competitive in their services to their customers so they don?t change bank.

Kontrollbox för häftare A6102

This report describes the construction and development of a control box, which is a tool for testing and verifying a certain model of Rapid?s built in staplers (model A6102). Basically the function of the control box is to interpret any errors that may occur in the stapler and to make it possible to test fire the stapler.The control box should be able to communicate with the stapler using a specialized communication protocol. The different data such as errors, firmware etc. from the stapler is presented in plain language on a display.

Distributed Operations : en framtida lösning för upprorsbekämpning?

Chefen för amerikanska marinkåren beslutade 2005 att påbörja utvecklingen av konceptet DistributedOperations (DO). Syftet med konceptet är bland annat att möta utmaningarna inom upprorskrigföring och?Small Wars? som kännetecknas av asymmetriska förhållanden mellan parterna. Grundidén medDistributed Operations är att skapa en fördel över motståndaren genom att uppträda utspritt ellerkraftsamlat och hela tiden kunna avge understöd till den ?lägsta enheten?.

Metallersättning inom byggbranschen

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Innovating Customer Experience -from a telecom industry perspective

Purpose: The purpose of this thesis is to identify and analyze innovative products and services within the telecom industry, letting these findings constitute possible ways for CSPs to innovate the experience of their customers. Methodology: The research in this thesis was conducted from a qualitative approach and data were collected using primary- (expert interviews) and secondary sources (journals, articles, web sites etcetera). In addition, a research design entailing four sequential steps was created to stipulate and illustrate the logic underpinning the methodological process. Theoretical perspectives: The theories are divided in three groups. Background theories ? these intend to capture the problematic nature of the transforming telecom industry, examples of such theories are; value chain theories and ecosystem theory.

Prognoser av räntabilitet på eget kapital - En studie av hur Re-prognoser påverkas vid en uppdelning av hävstångsformelns komponenter

Forecasting is an important part in attempting to predict how companies will perform in the future. The more accurate the prediction, the more valuable are the results obtained from the forecast. This thesis aims to investigate forecasts of return on equity, and whether a disaggregation of the leverage formula into its underlying components affects the forecasting ability positively. This is conducted by comparing a model based on the leverage formula's components with a model solely based on return on equity from previous years. The study includes manufacturing companies on the Swedish Stock Exchange over the period 1998-2011.

Utmattningsberäkning av hydraulikkopplingar : Metoder och beräkningar gällande utmattningsteorier

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

<- Föregående sida 7 Nästa sida ->