In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by Disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

The Swedish government has a goal of achieving a fossil-free vehicle fleet in 2030. Heavy transport constitutes a significant part of Sweden's transportation sector and the vehicles are driven almost exclusively by fossil fuels. Siemens has developed eHighway, a concept for electric road systems enabling electrification of trucks, in order to reduce the environmental impact of heavy transports. This study aims to investigate the potential that eHighway has on transporting iron ore from the mine of Mertainen to a processing plant in Svappavaara. Electrified trucks are compared with conventional trucks, and diesel and electric trains.The evaluation was made with respect to energy consumption, environmental impact, and cost.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

This thesis investigates the possibilities offered to a working landscape architect by anincreased and altered use of digital 3D environments. A basic assumption is that increased useof digital three-dimensional environments promotes the creative processes and presentationoptions of landscape architects.The thesis is based on literature studies and communication with working landscapearchitects, and includes an investigation of the visualization methods available in the Blender3D modelling software. The thesis provides a thorough survey of what it means to model inthree dimensions, as well as of what modelling methods are feasible for a landscape architectto use. As landscape architects, we work with human and unique processes, and thus it isdifficult to develop standardized and automatic software for our profession. One possiblesolution is to turn to open source development, where software and models are shared andanyone can contribute.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

In the middle of Australia there is a city called Alice Springs. The city has one of the highest amounts of daily sunshine hours and sun irradiation in the world. The Australian Government runs a project called Solar Cities, and Alice Springs is one of the participators. The main part of the goal with the Solar Cities project is to increase the amount of electricity generated by solar power and by doing that lower the impact on the environment. This thesis examines the possibilities for construction of a large scale solar power plant in Alice Springs. This is done to determine the potential of creating a more sustainable energy system in the city.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

Title: Hälsa i sociala medier - En kvalitativ studie om hur hälsoinformatörer upplever och påverkas  av hälsobudskap i sociala medier.Title: Health in social media - A qualitative study of how health communicators perceive and are affected by health messages in social media.Author: Anna HedströmInstitute: Karlstad University. Faculty of health, nature and engineering sciences.Tutor: Owe StråhlmanDate: 150615Number of pages: 34Keywords: eHealth literacy, health communication, health informers, health literacy, health messages, media literacy, social media Background: With an increased interest in diet and exercise, also health and fitness messages have increased in both traditional and social media. The general guidelines on physical activity and diet are forgotten as training tips increase in the media. Research shows that it is common for individuals to retrieve information from the media when it comes to their own health. In doing so media literacy, health literacy and eHealth literacy becomes increasingly important for health communicators and for those who receive health information. Objectives: The aim of this study was to examine health communicators? experiences of health messages in social media, and how they are affected by them. Method: Qualitative interviews were chosen as a method to collect data.

AbstractDet har i ett antal internationella undersökningar framkommit att HBT- personer har sämre hälsa än heterosexuella. I den förbindelsen har syftet med denna uppsats varit att diskutera kring vilka åtgärder som är möjliga för att förändra denna ohälsa, där jag har koncentrerat mig på särlösning kontra integrationsteorier. Jag har inriktat mig på lesbiska och bisexuella kvinnor inom HBT- området. Med hjälp av Nancy Fraser och Iris Marion Youngs teorier om erkännande eller omfördelning diskuteras särlösningen och integreringens fördelar och nackdelar. Problemet är att det vid särlösningar finns en risk för att lesbiska och bisexuella kvinnor fasthålls i sin marginalisering och att det inte arbetas med roten till problemet.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.