Inadequate data quality has a negative effect for organizations, however utilization of modern technology and data analysis may shape new values for organizations. Our research has found that the quality of information in field reports for error reporting varies significantly. In many cases, the information in the field reports are deficient in such way that the field report need additional information from the sender, thus risking prolonging lead times in the error reporting process. More efficient use of information has become possible with today?s technology.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

Målet med Brunnsviken Brief Quality of Life Inventory (BBQ) är att skapa en kortfattad och lättadministrerad skattningsskala för självupplevd livskvalitet med goda psykometriska egenskaper vilken är gratis för alla att använda. I framtagningen av BBQ har data insamlad med Quality of Life Inventory (QOLI) i tidigare studier använts för att identifiera de livsområden med störst betydelse för självupplevd livskvalitet. I aktuell studie har normvärden tagits fram för den i studien ingående undersökningsgruppen bestående av 167 psykologistudenter. Studien har visat att BBQ har utmärkt reliabilitet (test-retest), 0,89. Vidare hade BBQ lika god validitet för undersökningsgruppen som QOLI.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Swedish beef production has during the past year decreased while the consumption has increased. It´s imported beef that takes market shares. The purpose with this degreeproject is to investigate if the restaurants in Sweden are using imported or Swedish beef and the reason for their choice. The purpose is to find out if there is something the Swedish beef producers can change to increase Swedish beef in restaurants. My expectation is that the demand for Swedish beef will increase in restaurant and later even among consumers. I have interviewed ten chiefs in different restaurants and asked them the following questions: Is it the price, quality or something else that influences your choise? Does it matter to their customers if they serve Swedish or imported beef? How is the marketing of Swedish beef? It appeared both Swedish and imported beef on the restaurants.

Kantzoner mot vattendrag är av stor betydelse för att upprätthålla eller förbättra vattenkvaliteten i våra vattendrag. De strandnära zonerna fungerar som reservat i skogen med stor biologisk mångfald. De utgör barriärer för näringsämnen, löst organiskt kol, sediment, kvicksilver och andra miljögifter. Trädens rötter armerar jorden närmast vattendraget och minskar erosion och sedimentation. Syftet med detta arbete har varit att beskriva varför kantzoner bör användas och hur bredden på kantzonen, med hjälp av en modell i ArcMap, kan anpassas efter förhållandena runt vattendraget.

Fartyg använder sig av stora dieselmotorer för framdrift och för att producera elektricitet ombord. Motorerna samt diverse kringsystem har behov av kylning och till detta används kemikaliebehandlat vatten i ett slutet kylsystem. Vid tömning och läckage från systemet tenderar det kemikaliebehandlade vattnet att hamna med länsvattnet. Länsvattnet genomgår en reningsprocess innan det pumpas överbord. Denna reningsprocess är inte utformad för att avskilja kemikalier och dessa tenderar att hamna i havet.

Gene technology has become more and more attractive in plant breeding during the last twenty years. This is probably because it can readily improve the existing commercial cultivars that have only one or a few drawbacks by modifying one or a few genes without changing the main genetic constitution. In this regard, gene technology is more effective than conventional breeding.The aim of this project was to analyze the fruit quality of the non-transgenic apple scion ?Jonagold? grafted on non-transgenic and rolB-transgenic apple rootstocks. The rootstocks used were M9-rolB1, M9-rolB2, M26-rolB and non-transgenic controls M9 and M26.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.