The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This study investigates if and how grammar instructions and exercises in Spanish textbooks have evolved during the last thirty years. More specifically it focuses on how the grammar is presented (explicit instruction) and on the nature of the exercises (input, production and interaction). The method for investigating these things is firstly an analysis of the explicit instruction, and secondly a quantitative study of the exercises. The number of textbooks analyzed in this study is four and only the chapters that focus on teaching the preterite are included in the analysis. The result shows a tendency towards direct explicit instruction and controlled production practice.

In this study we have analysed from an intersectional perspective two textbooks Historia 1b and Progress Gold A which are purposed to be used as teaching material in Swedish schools in the subjects of History and English. Our question and reason for doing the analysis is to emphasise and make the variety of women in the books visible in order to compare that variety to the one that is demanded by the Swedish curriculum. The analysis is made from an ideology critical perspective and contains quantitative elements. Our conclusion is that the material contains both excluding and including features. Some intersectional categories are well represented while others, like functionality and religion, are not.

The purpose with this study was to elucidate the pros and the cons with a sale support system. This has been narrowed down into two questions: ?What are the pros and cons for a company that have a sale support system? and what are the pros and cons for a company that does not yet have a system?? Configurator that is a sale support system has been studied. It is a system that presents products by accepting different functions, qualities or parts that are possible to match. It can be used in business-to-business or business-to-consumer situations, through different sale channels, namely direct sale, indirect sale and online sale.

AbstractThe aim is to find out the teachers´ different point of views regarding what and why it´s important to teach children about the human body and in what way educationists can teach this knowledge. Seven teachers are asked, through qualitative interviews, about their point of views on teaching the human body in pre-school.The teachers don`t seem to reflect upon the subject, which shows that a development of knowledge needs within the area.Fist of all the children´s spontaneous questions direct what the educationists talk about with the children. The most frequently mentioned questions are about the circulation of the blood and the digestion organs. The teachers think it´s important that the children get knowledge about the human body in order to get a better opinion of their own bodies and themselves. It´s also important because this is the basis of other kind of knowledge, for instance the knowledge about animals..

Today environmental management systems (EMS) are common documents (more correctly, a combination of documents) that direct, steer and regulate environmental efforts within many companies. The intention of EMS is that its guidelines are reflected in how the employee carries out his everyday work tasks. This study aims to illuminate the attitudes that exist regarding the EMS at ALSTOM Power Sweden. By using questionnaires and interviews as a method to communicate with employees,a study of the existing attitudes regarding the EMS was carried out. The results were analyzed categorically and statistically and show that there are consistent attitudes among employees, but that there are also inconsistent attitudes.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Objective: The aim of this study was to compare equations used to calculate BMR to values of BMR obtained from measurements in order to determine the most suitable equation to be used on children and adolescents with CF.Design: The participants where children and adolescents with CF. Data was collected from the division of Clinical Nutrition at Uppsala Akademiska Sjukhus. Age, weight, height, BMI, BMR, FFM and FM was recorded from 27 measurements. BMR from the participants collected from the indirect respiratory calorimetry was compared to the results obtained from five equations used to obtain a calculated value of BMR.Results: Tverskayas equation was best correlated with the measured BMR for the whole group. The equation underestimated BMR for the participants with a measured BMR over 1400 kcal/24h and overestimated BMR for participants with a measured BMR under 1400 kcal/24h.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Lättviktsskivor till möbelindustrin har varit ett omskrivet tema i olika branschtidningar den sista tiden.Detta examensarbete beskriver och undersöker en ny konstruktion av en lättviktsskiva i massivt trä.Lättviktsskivan är uppbyggd som en sandwichkonstruktion i tre skikt. Ytskikten består av 6 mm tjockalimfogar och kärnmaterialet av profilerade distanser. Materialet är furu och lättviktsskivan har endensitet på 320 kg/m3 vid 39 mm tjocklek. Utifrån kontakter med utvalda tillverkare och användare avskivmaterial, samt genom tester, har denna konstruktion granskas och förslag på förbättringar har tagitsfram. Den ursprungliga distansen som var sammansatt av två halvor med centrumhål har ersatts av enmassiv distans med en liknande profilering.

Requirements engineering is a widespread topic in the research field of informatics. However, there is little research regarding lack of requirements documentation and how it is perceived. The same applies for how requirements engineering in retrospect can be implemented. This is a debated issue on blogs and forums but it has not been reflected in the research area.Therefore, this study concerns research questions regarding how the developers, testers and requirements analyst experience the lack of requirements documentation and how requirements engineering in retrospect can be implemented.To answer these questions, data collection has been conducted through qualitative interviews with individuals affected by this problem in their everyday work.This study has provided an explanation of how the problem is perceived and what the consequences are, both direct and indirect. The impacts are divided into three categories and are presented as, emotional consequences, system implications and consequences regarding re source consumption.

The purpose of this study was to identify exerciser athlete?s motivational orientation, coping strategies used and stressors that primarily is perceived in gym training. The study also studied gender differences in relation to motivation orientation, coping strategies and stressors. A survey was conducted with a quantitative design. The study included 118 participants (43 women and 75 men) aged 18 - 42.

In today?s society Internet is evolving the tourism industry and it?s the pioneers that use this marketing channel to further their brands that?s that reap the benefits of early adoption. In this essay we research how well two kinds of ownership structures, private ownership and chain ownership, in the hotel market match up against each other in Internet presence and the steps they have taken to encourage guests too book via their websites. We determined that the hotel market in Karlstad was sufficient to study the different kinds of ownership structures as it?s small enough to see the competition between private ownership and chain ownership clearly instead of as normal in more densely populated cities where chain owned hotels dominates the marked due to sheer size. The scientific research consists of two types of methods.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.