The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

Det finns ett begränsat utbud med forskning kopplat till hur fotbollstränare tänker kring ochgår tillväga under träningar inte bara i Sverige utan även internationellt. Studierna vi har tittat på är inte samtliga i ämnet men påpekar bristen av intresse att undersöka coachers didaktiska tillvägagångssätt kopplat till teoretiska kunskaper. Uppsatsen har skrivits inom ramen av ett större projekt. Studien är av kvalitativ ansats med utgångspunkt ur Peitersens modell?Metodiska former?.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

In my work I have chosen to examine the profitability for small scale production of hemp briquettes. My study also includes a review of which briquette technique that is the most common one among small scale producers. The reason that I have chosen this subject is because of the discussions about climate and energy that we face almost every day. I also think the subject is extra interesting in these days when the grain prizes are at a historic high level. In order for me to achieve a reliable report, a hemp and briquette producer has given me the actual data from his farm. In that way I have been able to make my calculations from a concrete perspective.

This is a project about how you grow timothy seed and red clover seed successfully. The main part is about economic analyse to see if it is any economy by growing leyseed. There are lots of things to be aware of to get all the costs in your economic analyze. Timothy Timothy seed is planted on 4400 hectares in Sweden. It is possible to grow timothy seed in the south part of Sweden. Timothy is very sensitive for dry weather in spring and in the beginning to summer. Timothy gives acceptable harvest of seed for about three years. Red clover Red clover is also sensitive for dry weather and is suitable to grow in the south part of Sweden.

Denna studie av den digitala marknaden för svensk dagspress är ett examensarbete utfört åt kvällstidningen Expressen. Undersökningen syftar till att utreda den strukturella marknadssituationen för svensk dagspress och dess förutsättningar rörande framtida närvaro i surfplattan. Via intervjuer med branschexperter söks tolkningar om läsartrender och behov i surfplattan, paketeringsstrategi och behovet av personifierade nyhetsflöden. Undersökningen och dess tolkningar understöds av en inledande litteraturstudie vilken behandlar den svenska dagstidningsmarknaden, dess digitala transformation och tekniska förutsättningar gällande surfplattan och rapporterade konsumenttrender.Studien visar bl.a. att den svenska dagstidningsmarknaden är utsatt för en hög intern konkurrens vilket ställer höga omställningskrav på bolagen i en digital era.

Domestication has resulted in the ability for animals to adapt to environments created by the human over time. The behavior differs very little between wild and domesticated animals, but the difference seen is how often and to what degree a behavior is performed. The need for efficiency in modern animal production has led to welfare problems in the productionsystems where the animals have difficulties coping with their environment. Attempts to environmentally adapt individuals by selection for reduced frequency of natural behaviours have been made. These have shown that natural behaviours are complex and are controlled by several different mechanisms, making selection for reduced natural behavior difficult, and it may also lead to unwanted and abnormal behaviours.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel data set of 50 companies over 5 years (2008-2012). The data used is yearly data obtained from the Swedish district heating association.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.