Purpose/Aim: Our purpose with this study is to examen the differences in communication between digital immigrants and digital natives, how the digitization has changed our way to communicate in an interpersonal matter.Main Results: Through our study we have concluded that barriers do exist between students (natives) and teachers (immigrants), but not to the extent we first predicted. The digitization has resulted in a change in the way we communicate and our relation to each other. But in a purely communicative matter, the digitization hasn?t made it harder for natives and immigrants to understand each other, but it has contributed to new vocabulary and the use of the language. New codes has been developed, but thanks to the younger generations ability to adapt to change - this linguistic difference it is not a problem for the understanding of the code used by the immigrants.

Cultural objects may become wet by deliberate water cleaning, water disaster or watersoaked for other reasons. Air drying textile objects and even other organic materials from awater wet state, involves many problems depending on the strong capillarity action of water.Damages and changes such as bleeding of dyes, stains or lines of impurities from watermovement, shrinking or stiffness can occur. Freeze-drying as an alternative drying methodhas often been used for wet archaeological and marine objects, but more seldom for historicalmaterials.This bachelor thesis addresses the issue of whether freeze-drying can be an alternative controlleddrying method for historic costumes. Costumes and related objects are often compositeobjects, consisting of multiple materials, as well as being three dimensional, all of whichwill complicate drying. The purpose of this study was to investigate whether it is possible tohandle costume objects after wet cleaning for drying by freeze-drying, and if damages due tosurface tension of water, can be avoided in this way.

Norrbottens läns landsting står inför en övergång från analog till digital mammografi. I och med att det här ämnet är så aktuellt just för norrbottens läns landsting så tyckte jag att det vore intressant att fördjupa sig i ämnet. Jag ville göra en jämförelse mellan dessa båda tekniker när det gäller stråldos, bildkvalitet och diagnostisk säkerhet. För att uppnå mitt mål har jag använt mig av litteraturstudie vetenskapliga artiklar inom det aktuella området. Då jag skulle skriva om utrustningen använde jag mig av litteratur och Internet.

Bakgrund: Marknadsföring är ett ständigt föränderligt område, och den tekniska utvecklingen har medfört både problem och lösningar. Digital produktplacering, vilket möjliggör infogning av produkter och varumärken i efterbearbetningen av en film- eller tv-inspelning, kan ses som en lösning på den traditionella produktplaceringens brister.Syfte: Syftet med studien är att presentera en konceptuell jämförelse mellan traditionell och digital produktplacering med fokus på att, inom ramen för det senare, beskriva, analysera och skapa en förståelse för fenomenet. Studien innefattar att en definition av digital produktplacering skapas, samtidigt som dess bransch exemplifieras och framtidstron utreds.Genomförande: Efter genomförd förstudie användes dokumentstudier, och intervjuer med fem aktörer inom produktplaceringsbranschen samt en medieforskare, för att studera fenomenet utifrån vårt valda syfte.Slutsats: Vår definition av digital produktplacering, ur marknadsföringssynpunkt, lyder: Digital infogning av produkter, eller varumärken, i tidigare inspelat medieinnehåll i syfte att påverka den avsedda målgruppen. Fenomenet anser vi komplettera traditionell produktplacering som marknadsföringsmetod och kommer därför troligen inte att ersätta densamma, utan istället verka i symbios. Däremot tycks framtiden se positiv ut för de båda fenomenens användande..

Abstrakt För att utveckla och förändra spelmediet behandlar detta arbete impressionism och digitala spel. Båda ämnena diskuteras och belyses från olika vinklar för att undersöka hur de två ämnena kan sammanföras i en spelproduktion. Spelproduktionen har testats av spelstudenter för att få deras åsikter om hur spelet fungerar och deras syn på kopplingen mellan impressionism och digitala spel. Arbetet avslutas med en diskussion och slutsats där alla fakta som tagits in under kandidat-arbetet analyserats. I diskussionen lyfts följande ämnen fram: impressionism, konst, hur spelmediet ser ut idag, tv- och dataspelsgestaltning, interaktion och hur dessa två ämnen, impressionism och digitala spel kan föras samman.

Under de senaste årtiondena har matematikbokens format inte utvecklatsnämnvärt, man har försökt att blir mer digital genom att skickamed en cd-skiva med digitalt material och för de lägre årskurserna igrundskolan finns det matematikspel. För gymnasielever finns inte mycketinteraktivt och digital material idag. Behovet av en ny lärresurs ärstort och vi vill med detta arbete utröna vilka funktioner som bör ingå.Elever och lärare är överlag mycket positiva till utvecklingen ochde undersökningar vi tagit del av visar på ökat användande av datorerute på skolorna. Vi tog fram två gränssnittsskisser med en lärargruppoch en elevgrupp oberoende av varandra. Dessa två skisser sammanfogadestill en prototyp.

The negative trend of newspapers reading gives the owner of several paper manufacturingcompanies in the West worries. Producers should be more concern to strengthen their marketpositions in order to maintain profitability in the paper mills. Holmen Paper is a medium sizedpaper mill company with all of their production in Europe. Sales are mainly made to printingcompanies operating in European countries. In order to strengthen their economic strengthHolmen Paper needs to increase the market share in markets where they have the greatestprofit margins.

This research project is based on observing and Analyzing the Role of a textile merchandiser in managing the supply chain of the Home Textiles In The Buying or retailing, in the Mill and with the Agents. The project also "highlights the comparative analysis of the practices by Followed merchandisers into the retailer side, mills and Those In The Agents', on the basis of the Functions Which Supports the supply chain. In the discussion, We Have highlighted Importance Of The Role Played by an agent and by the merchandisers of Buyer and Supplier in Different situation. By our research work we find out The Challenges face by merchandisers And Then we come up with sometime suggestions.This Research Project Has Been Developed by Contacting and Visiting Hemtex, Brink Textiles, by interviewing the merchandisers working in the Industries like Al-Abid Silk Mill . By Analyzing the data & the data through the visits and the interviews, this Research Project Has Been Combined to give in-depth knowledge about the Activities Which merchandisers performer in a mill and into buying a house..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Ledarskap i slöjd och kulturhantverk15 hpInstitutionen för kulturvårdGöteborgs universitet2014:30.

I detta examensarbete har olika sätt att implementera färgrymdskonverterare i multipel konstant multiplikationsteknik beskrivits med VHDL, syntetiserats och jämförts med avseende på effektförbrukning..

Companies have in the past decades changed fromtraditional manufacturing organizations into serviceorganizations. For these service organizationsinformation and competence have become animportant resource. The traditional view oninformation is that an employee use and search forinformation to reduce uncertainty for their decisionmaking. Even though information is strategicallyimportant for organizations, information is not valuedin any way. Hence, this thesis aims to valueinformation in terms of the utility it brings to theorganization.The conclusion is that four factors are important whenvaluing information in terms of utility.

Background: The use of digital marketing channels during the last years has increased significantly, especially the use of marketing on the Internet. Hence the communication chart of marketing has been redrawn. The technological development has had a major impact on the marketing discipline. The integration of information technology and marketing has resulted in the emergence of a new field, namely e-marketing. Hence the need for further research is desirable.Purpose: The purpose of this study is to examine alternative marketing procedures that a company can apply to increase the digital awareness and manage their customer relationships.Theoretical framework: Theories regarding digital marketing cycle, SEO and customer relationship.Method: This research is based on data collected through a primary semi-structured interview with a company active in the corporate information industry which also provides a RFQ service.

This survey deals with textile production and how it was carried out during the late Iron Age,with main focus on a central place, Uppåkra. A comparison has been carried out betweenUppåkra and two agrarian settlements, Fosie and V. Karaby, from the nearby landscape toinvestigate whether any variation in production can be detected. The value of textiles has alsobeen investigated to determine whether a potential specialization in production may have ledto a surplus.An analytical and comparative method has been used with focus on the context of thematerial.The results show that the textile production vary at the different sites, and that a need fordifferent types of textiles has existed. At Uppåkra, the possibility to produce fine threads andtextiles existed as demonstated by the findings of small and lightweighted spindle whorls.This suggests that the production may have included both fine and coarse textiles.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

Almost all Swedes today have access to the Internet, if not through the home then via the library or work. Despite this, around 20% of the population stand outside the information society in that they lack in knowledge, assistive usability tools or positive attitude towards technology and its influence on society. The main factors influencing the digital divide in today's society are age, disability and education, while the main reason for staying outside seems to be disinterest.The question about digital inclusion is important as we now stand on the breaking-point between a society where the industry has had a prominent position for private as well as national economy and a digital society where access to the Internet is no longer about prestige, but where significant differences between users' knowledge levels can create a power gap. Gaps in access and use not only reflects already existing socio-economic conditions, but can also maintain and enhance these.It is crucial for the future expansion of Internet usage how today's non-users feel about becoming users. To understand what underlies the motivations not to use computers is one of the keys to get non-users to embrace becoming users.