The aim of this master thesis is to examine information seeking andinformation use among high school pupils in two Norwegian highschools. The main research question focuses on different kinds ofinteraction or lack of interaction in the pupils? information seeking andinformation use.The theoretical framework of the thesis is based on a socioculturalperspective which allows for a specific focus of various forms ofinteraction. I investigate interaction in relation to concepts such associal practices, previous experiences and meaning making. Theempirical material consists of data from a large scale questionnaire (n=217) and in-depth interviews with six pupils.The results show that these pupils are used to interact with digital tools.The pupils trust printed sources more than digital ones, but at the sametime they prefer digital sources since these are easier to handle, it isquicker to locate information and this is easier to understand.

Syftet med denna undersökning var att undersöka den digitala kompetensen hos en grupp elever i årskurs nio på en skola i Stockholmsområdet. Utöver detta undersöktes några utvalda variabler för att avgöra deras eventuella inverkan på den digitala kompetens eleven tillägnat sig. Begreppet digital kompetens utnyttjas bland andra av EU-parlamentet och organisationen OECD vilka publicerat varsin skrift rörande nyckelkompetenser för livslångt lärande. Dessa två ger, tillsammans med en norsk undersökningsgrupps publikation, en gemensam definition av begreppet digital kompetens. Denna undersökning fokuserade dock enbart på ordbehandling, ett område inom den digitala kompetensen.Den empiriska undersökningen genomfördes med hjälp av en provliknande enkät där eleverna fick besvara frågor rörande ordbehandling.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

High housing- and construction costs is a fact in Sweden today. Prices on building materials more rapidly than producer price index for industrial goods. Prices tend to rise during market boom but does not adapt during diminishing demand. The effects of fading demand can rather be deduced through discounts and quotations. During 1992-1998 when the Swedish construction sector found it self in severe crisis the prices of construction materials kept rising more rapidly than PPI for industrial merchandise.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

?The modern library in the network society?A study of cultural politicians and librarians opinions about libraries' use of social mediaSocial media is becoming more and more interacted in our daily lives and Carlsson (2013) argues that today's libraries have undergone major challenges in the digital information technology's entry in the library arena. The new technology has led to sum up in one question: how a library should relate to the digital information technology, the issue has applied in particular the social communications media, such as Facebook, Twitter and more. The purpose of this paper is to examine the culture of politicians and librarians 'perceptions of public libraries' use of social media linked to the libraries and their democracy promotion efforts. This is analyzed from Castells theories about the network society and the digital divide.In summary, the study concluded that the majority of the culture politicians and librarians believe that social media is a part of the future of the library.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

Syftet med uppsatsen har varit att genom kvalitativa intervjuer lyfta fram motpolerna kringdagens konsumtion av digital underhållningsmedia och fastställa om konsumenters syn på värdekan relateras till deras val av att antingen betala för ägandet eller för tillgänglighet av den. Metoden har bestått av åtta stycken kvalitativa intervjuer där respondenter fått frågor om sinkonsumtion av digitala underhållningsmedia inom; musik, video, spel och podcasts. Uppsatsen kommer fram till att konsumenter ser värdet i användningen av mediet och inte iägandet av det. Konsumenterna vill således hellre strömma sin media än att ladda ner den. Deväljer därför mer eller mindre obehindrat den tjänst som har bäst utbud.

The Swedish field of digital X-ray imaging has since several years relied heavily on distributed information systems and digital storage containers. To ensure accurate and safe radiological reporting, Swedish software-firm eCare AB delivers a system called Feedback?the first and only quality assurance IT support product of its kind. This thesis covers several aspects of the design and implementation of future versions of this software platform. The focus lies on distributed directory services and models for secure and robust data propagation in TCP/IP networks.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

It has now passed two years since the new site- and construction law, PBL, went into force. It replaced the previous PBL applicable since 1987, and it involves relatively large changes in many different areas of the construction sector. The ambitions of the new law are for instance to simplify and clarify the legal text, increase efficiency in the permitting processes and improve the quality of construction. To achieve this, a variety of changes was made. Some of the most important are: inserted deadline in the processing of building applications, extended assessment of building applications, revised rules about controlplan and quality manager, a certificate is required to start and end the project, an additional meeting is inserted and the construction management of the municipalities will have to do a mandatory visit at the work scene.

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

This Master's Thesis describes the design of a new system where a digital signal processor has been added to an existing imaging system consisting of field programmable gate arrays. The new system will offer a higher degree of flexibility by considerably shortening the design time and make it possible to implement more complex algorithms than the existing ones. The choice of system architecture and a test implementation are discussed. The test implementation consists of a program for the digital signal processor and VHDL code for one of the field programmable gate arrays. The code for the digital signal processor was designed for testing on an evaluation board from Texas Instruments.